• Transactions of the Korean Society of Mechanical Engineers
• /
• 제19권4호
• /
• pp.1051-1061
• /
• 1995

In order perform leak-before-break design of nuclear piping systems and integrity evaluation of reactor vessels, full stress-strain (.sigma. - .epsilon.) curves and fracture resistance (J-R) curves are required. However it is time-consuming and expensive to obtain J-R curves experimentally. The objective of this paper is to develop two methods for J-R curve prediction. In the first method, elastic-plastic finite element analyses for a series of crack length / specimen width ratio were performed. Accordingly the load versus load line displacement (P .delta.) curve corresponding to the fracture strain is obtained and the J-R curve based on the generalized locus method is obtained. In the second method, the correlation between .sigma.-.epsilon. curves and J-R curves was statistically analyzed and an empirical equation to predict the J-R curve from the .sigma.-.epsilon. test result is proposed. A good correlation between the predicted results based on the proposed methods and the experimental ones is obtained.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.178-180
• /
• 2008

With the increase in population, the area of human activities has expanded, resulting in the dramatic increase in the need for transportation system. Tilting trains are currently in operation in 13 countries around the world. TTX(Tilting Train express) has been developed by KRRI(Korea Railroad Research Institute) for last 6 years to satisfy the need. This train developed in this Project is designed for a design speed of 200km/h and a maximum operating speed of 180km/h. We developed a measurement system for on-line test. the measurement console desk is mounted on T car, which is designed as the DAQ system train. It is comprehensive of the industrial computers, LCD monitors, communication cards and the communication channel measurement system. Using this system, SIV performance evaluation was conducted.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.215-217
• /
• 2004

In wireless sensor networks, fair allocation of bandwidth among different nodes is one of the critical problems that effects the serviceability of the entire system. Fair bandwidth allocation mechanisms, like fair queuing, usually need to maintain state, manage buffers, and perform packet scheduling on a per flow basis, and this complexity may prevent them from being cost-effectively implemented and widely deployed. It is a very important and difficult technical issue to provide packet scheduling architecture for fairness in wireless sensor networks. In this paper, we propose an packet scheduling architecture for sensor node, called FISN (Fairness Improvement Sensor Network), that significantly reduces this implementation complexity yet still achieves approximately fair bandwidth allocations. Sensor node for sensing estimate the incoming rate of each sensor device and insert a label into each transmission packet header based on this estimate. Sensor node for forwarding maintain no per flow state; they use FIFO packet scheduling augmented by a probabilistic dropping algorithm that uses the packet labels and an estimate of the aggregate traffic at the gathering node. We present the detailed design, implementation, and evaluation of FISN using simulation. We discuss the fairness improvement and practical engineering challenges of implementing FISN in an experimental sensor network test bed based on ns-2.

• Research in Community and Public Health Nursing
• /
• 제22권3호
• /
• pp.252-261
• /
• 2011

Purpose: This study was conducted to evaluate the effects of a dementia education program for Korean older adults who resided in community. Methods: The research adopted the non-equivalent control group pretestposttest design. A total of 66 older adults completed the study (31 older adults in the experimental group and 35 in the control group). The Experimental group participated in a six-session dementia education program for three weeks. The effects of the dementia education program were evaluated using the measures of knowledge of dementia and attitude toward dementia. Data were analyzed using independent sample t-test with SPSS/WIN 18.0. Results: There was a significant change in the knowledge of dementia in the experimental group (t=2.75, p=.008). Although there was an increase in attitude toward dementia in the experimental group, the change was not statistically significant (t=1.26, p=.212). Conclusion: The results indicated that the dementia education program is effective in improving the knowledge of dementia among community-dwelling older adults. There is a need to develop more effective dementia education programs designed to improve older adults' attitude toward dementia. Further research is needed using a highly rigorous research methodology.

• Journal of the Korean GEO-environmental Society
• /
• 제8권3호
• /
• pp.19-25
• /
• 2007

Stone columns is the ground improvement method which composed of compacted gravel or crushed stone inserted into the soft ground consisting of loose sand and clay. There are many difficulties in quantitative analysis of soil-pile interaction because settlement behavior of stone columns is affected by various parameters. In this study, various parameters of behavior of end-bearing group piles are investigated by load tests. Finally, the improved characteristics of soft ground and the influence of design parameters are investigated in this study using PR (performance ratio) value. From the PR value calculation and test results, we know that settlement behavior of stone columns is affected by area replacement ratio of composite ground, diameter of column rather than embedment ratio and mat.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권11호
• /
• pp.1609-1613
• /
• 2013

An experiment was conducted to determine the apparent total tract digestibility (ATTD) and standardized total tract digestibility (STTD) of phosphorus (P) in copra expellers (CE), palm kernel expellers (PKE), and cassava root (CR). Eight barrows (initial BW of 40.0 kg, SD = 4.5) were individually housed in metabolism crates. A replicated $4{\times}3$ incomplete Latin square design was employed involving 4 dietary treatments, 3 periods, and 8 animals. Three experimental diets contained 40% CE, PKE or CR as the only source of P. A P-free diet mainly based on corn starch, sucrose, and gelatin was also prepared to estimate the basal endogenous loss of P. The marker-to-marker method was used for fecal collection. Values for the ATTD of P in the CE and PKE were greater than in the CR (46.0 and 39.7 vs -14.0%; p<0.05). However, the STTD of P did not differ greatly among the test ingredients (56.5, 49.0, and 43.2% in the CE, PKE, and CR, respectively). In conclusion, the ATTD of P values in CE and PKE were greater than that in CR, but the STTD of P did not differ greatly among CE, PKE, and CR.

• Fashion & Textile Research Journal
• /
• 제12권6호
• /
• pp.843-850
• /
• 2010

To evaluate the heating performance of commercial heated vests, we investigated the thermal images and the temperature between body and vest for three heated vests. We captured infrared thermography by FT-IR Spectrometer to analyzed the heating temperature of the heating elements taken from the vests, and the maximum heating temperature of the vests was compared with thermal image in the room temperature($18^{\circ}C$). In outdoor experiment($-4.7^{\circ}C$), we measured the inner temperature as well as the thermal image of heated vests. Four healthy men participated in this experiment, and the ANOVA and Duncan test was performed for statistical analysis. As the results, the heating temperature range of the heated vests used in this experiment was $32{\sim}42^{\circ}C$, much lower than the displayed temperature range in their specifications, so the exact specification for heating performance of heated clothing was required. In comparisons of the heating performance among the heated vests, we found out that the insulation of clothing is very important to design the heated clothing, because the inner temperature of the vest had good insulation by itself was higher than that of the vest shown higher temperature over $7^{\circ}$ than another vests at the heating temperature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제26권6호
• /
• pp.1069-1076
• /
• 2002

The high temperature creep behavior of heat machine systems such as aircraft engines, boilers and turbines in power plants and nuclear reactor components have been considered as an important and needful fact. There are considerable research results available for the design of high temperature tube materials in power plants. However, few studies on the Initial Strain Method (ISM) capable of securing repair, maintenance, cost loss and life loss have been made. In this method, 3 long time prediction Of high temperature creep characteristics can be dramatically induced through a short time experiment. The purpose of present study is to investigate the high temperature creep lift of Udimet 720, SCM 440-STD61 and 1Cr-0.5Mo steel using the ISM. The creep test was performed at 40$0^{\circ}C$ to $700^{\circ}C$ under a pure loading. In the prediction of creep life for each materials, the equation of ISM was superior of Larson-Miller Parameter(LMP). Especially, the long time prediction of creep life was identified to improve the reliability.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제23권1호
• /
• pp.1-6
• /
• 2014

This paper describes a method of estimating and evaluating the volumetric errors of multi-axis machine tools. The estimation method is based on a generic model that was developed from conventional kinematic error models for the geometric and thermal errors to help predict the volumetric error easily in various configurations. To demonstrate the advantages of the model, an application in the early stages of a five-axis machine tool design is presented as an example. The model was experimentally evaluated for a four-axis machine tool by using the data from ISO230-6 and R-test measurements to compare the estimated and measured volumetric errors.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제21권4호
• /
• pp.613-618
• /
• 2012

The Ultrasonic metal welding is used in the solid-phase welding method at room temperature or low temperature state. In welding process, the high frequency vibration energy is delivered to the welding part under the constant pressure for welding. In this study, we aimed to design and manufacture a 40,000 Hz band horn through finite element analysis. By performing modal analysis and harmonic response analysis, the modal analysis result is that the horn frequency was 39,599Hz and the harmonic response result that the horn frequency was 39,533Hz. These results were similar. In order to observe the designed horn's performance, about 4,000 voltage data was obtained from a light sensor and was analyzed by FFT analysis using Origin Tool. The result RMS amplitude was approximately $8.5{\mu}m$ at 40,000Hz, and maximum amplitude was $12.3{\mu}m$. Using this manufactured horn along with an ultrasonic metal welder and tension tester, the weldability of Cu sheets was evaluated. The maximum tensile force was 66.53 N in the welding condition of 2.0 bar pressure, 60% amplitude, and 0.32 s welding time. In excessive welding conditions, it was revealed that weldability is influenced negatively.