• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1132-1139
• /
• 2006

Non-contact underwater explosions against surface ship could cause extensive equipment damage during wartime service. Thus, the need to develop methods for the design of shock resistant equipment structures and systems was strongly established. In analytical methods, DDAM(Dynamic Design and Analysis Method) and transient repsonse method are used for ship shock design. In this paper, to analyze the characteristics of DDAM, medium weight shock test, DDAM and transient response analysis for missile system equipment are performed.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.416-421
• /
• 2007

Physical damage to fruits and vegetables caused by shock degrades the value of product in the fresh market. In order to design a product/packaging system to protect the product, the G-factor to the product that causes shock damage needs to be determined. The shock fragility of organisms such as fruits with a concept correspondent to the G-factor of industrial products was calculated and we defined the allowable bio-shock fragility index as the value divided peak acceleration that was generated in safe drop height by standard acceleration of gravity. We did modeling for safe drop hight that would prevent fruits from damage by drop tests and tried to estimate the allowable bio-shock fragility index of pears and apples for optimum packaging design. The bio-shock fragility index of pears was in the range of $0.74{\sim}2.29\;G$, while apples had a slightly higher value than that of pears, of $0.51{\sim}2.98\;G$. This result shows accordance with the general fact that apples have a firmer structure and get less damage from the same impact. Based on this result, it is possible to create an optimum packaging design by providing a damage standard by impact.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.231-231
• /
• 2005

• 소음진동
• /
• 제11권3호
• /
• pp.449-454
• /
• 2001

The shock performance of hard disk drives has been a serious issue for portable computers and AV application HDD. Focusing on the motion of an actuator, we investigated non-operational shock mechanism and studied several parameters that affect the shock performance by experimental analysis. It was found that there are two important factors fort the actuator to endure high shock revel. One is a shock transmissibility and the other is a beating between the arm blade and the suspension. To generalize the shock transmissibility, the concept of shock response spectrum was introduced. The shock response spectrum of the actuator system was obtained experimentally and compared with that of an analytical single degree of freedom model. It was found that there was a good agreement. The first bending natural frequency of the arm blade was found to be the most important factor for the low shock transmissibility. By applying the shock response spectrum and avoiding the beating, we could design an actuator of high shock performance.

• 한국정밀공학회지
• /
• 제18권1호
• /
• pp.111-116
• /
• 2001

A practical scheme to reduce failure of the PCB(Printed Circuit Board) of a monitor is introduced using deformed mode shape under mechanical shock. When the monitor is given critical shock loads, cracks are commonly initiated at the tip of a hole on the PCB. Accordingly, a deformed mode shape of the PCB is obtained using a FEM code to define a weak point on the PCB under mechanical shock, and then the position and direction of the hole is determined to prevent the failure at the critical mode shape. Also, the stress intensity factor around the weak point on the PCB is calculated to check the possibility of fracture by normal tensile stress. In conclusion, present research is useful to assist the practical design of components-layout on the PCB.

• 항공우주시스템공학회지
• /
• 제9권4호
• /
• pp.55-61
• /
• 2015

In this study, we peformed optimal design of a composite skid landing gear, one of the solid spring shock absorbers, for light vertical takeoff and landing aircraft. Although a solid spring type has poor energy dissipation capability, it is commonly used for light aircraft where sink speeds are low and shock absorption is non-critical in terms of simplicity, low cost and weight reduction. In this paper, design parameters of solid spring such as sink speed, gear leg length, deflection and landing load factor were reviewed. In order to meet structural requirements such as deflection and strength, finally, we conducted optimal design of the composite skid landing gear for VTOL UAV using genetic algorithm and pattern search algorithm.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1347-1353
• /
• 2004

With respect to the researches of the optical flying head(OFH) , the head-gimbal assembly should be analyzed to guarantee the stable fabrication and the characteristics of shock resistance. The suitable design is proved through the Probabilistic analysis of the design parameters and material properties of the model. Probabilistic analysis is a technique that be used to assess the effect of uncertain input parameters and assumptions on your analysis model. Using a probabilistic analysis you can find out how much the results of a finite elements analysis are affected by uncertainties in the model. Another factor is analysis of the dynamic shock analysis. For the mobile application, one of the important requirements is durability under severe environmental condition, especially, resistance to mechanical shock. An important challenge in the disk recording is to improve disk drive robustness in shock environments. If the system comes in contact with outer shock disturbance. the system gets critical damage in head-gimbal assembly or disk. This paper describes probabilistic and dynamic shock analysis of head-gimbal assembly in micro MO drives using OFH slider.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.235-241
• /
• 2016

Underwater weapon system is required to structurally strong material, since as it is directly exposed to external shock. It should also be using the lightweight material in order to take advantage of buoyancy. Composite materials meet these requirements simultaneously. Particularly in the case of submarine, composite materials are widely used. It is important to have a high strength enough to be able to withstand external shock, but it is also important to attenuate it. In a method for the shock damping, viscoelastic damping materials are inserted between the high strength composite material as a sandwich structure. Shock attenuation can be evaluated in the loss factor. In ASTM(American Society of Testing Materials), evaluation method of the loss factor of cantilever specimens is specified. In this paper, mode tests of the cantilever are performed by the ASTM standard, in order to calculate the loss factor of the viscoelastic damping material by the specified expression. Further, for verifying of the calculated loss factor, mode test of compound beams is carried out. In addition, the characteristics of the material were analyzed the effect on the loss factor.

• 터널과지하공간
• /
• 제27권3호
• /
• pp.132-145
• /
• 2017

과거 도로터널 환기에 있어서 충격 손실은 설계에 반영되지 않았지만, 터널 내 네트워크형 구조로 인해 분기 합류부가 존재하는 복층 도로터널에서는 충격 손실에 의한 압력 손실이 크게 발생할 것이다. 이에 본 연구에서는 네트워크형 구조를 가지는 복층 도로터널 최적 환기 설계를 위하여 분기 합류 지점에서 발생하는 충격 손실에 대한 3D 전산유체역학(CFD) 수치해석 연구를 수행한다. 이를 위해 복층 도로터널 표준단면을 적용한 실제 스케일 모델을 활용하여 전산 유체 역학을 수행하였고 다양한 각도와 차도폭에 대한 충격 손실 계수를 도출하여 기존의 설계 값과 비교 분석하였다. 연구 결과, 분기 구간에서는 30도의 분류 각도를 가진 모델의 충격 손실 계수가 높게 측정되었고, 합류 구간에서는 2차선으로 설계된 모델의 충격 손실 계수가 낮게 측정됨을 확인할 수 있었다. 따라서 분기 합류 각도와 차도폭이 충격 손실 산정에 있어서 중요한 설계 요소가 될 수 있으므로 환기기 용량 산정에 있어서 정확한 설계 인자를 제시할 것으로 판단된다. 본 연구는 3D 전산유체역학(CFD)를 활용하여 확폭 교차 유 무에 따른 분기 합류 지점에서의 충격 손실 계수를 도출하고, ASHRAE 설계 값과 결과를 비교 분석하였다. 확폭 구간이 반영되지 않은 모델은 ASHRAE 값에 비해 최대 3배의 충격 손실 값을 확인하였고, 확폭 구간이 반영된 모델은 최대 2배의 값을 확인할 수 있었다.

• 산경연구논집
• /
• 제11권3호
• /
• pp.7-17
• /
• 2020

Purpose: This study reexamines the test on the pricing of accruals quality. Theory suggests that information risk is a priced risk factor. Using accruals quality as the proxy for information risk, researchers have tested the pricing of information risk. The results are inconsistent potentially because of the information shock in the realized returns that are used as the proxy for expected returns. Based on this argument, this study revisits this issue excluding information-shock-free measure of expected returns. Research design, data and methodology: This study estimates expected returns using the vector autoregression model. This method extracts information shocks more thoroughly than the methods in prior studies; therefore, the concern regarding information shock is minimized. As risk premiums are larger in recession periods than in expansion periods, recession and expansion subsamples were used to confirm the robustness of the main findings. For the pricing test, this study uses two-stage cross-sectional regression. Results: Empirical results find evidence that accruals quality is a priced risk factor. Furthermore, this study finds that the pricing of accruals quality is observed only in recession periods. Conclusions: This study supports the argument that accruals quality, as well as the pricing of information risk, is a priced risk factor.