• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.1-10
• /
• 2018

The improvement of critical current properties of $REBa_2Cu_3O_{7-x}$ (REBCO) coated conductors by introducing artificial pinning centers (APCs) is examined with respect to the field-angle anisotropy, high-field performance and relaxation property with time. Nano-rods along the c-axis introduced by PLD method and isotropic nano-particles introduced by TFA-MOD method are treated. The theoretical analysis is also shown to understand the effect of APCs quantitatively. The effects of superconducting layer thickness that influences the high-field performance and relaxation property are also discussed. It is shown that the upper critical field, which is another important factor to determine the high-field property, can be improved by introduction of APCs through electron scattering at interfaces with the superconducting matrix. The optimum critical current property can be obtained by properly designing the morphology and number density of APCs and the superconducting layer thickness.

• 한국염색가공학회지
• /
• 제17권3호
• /
• pp.26-33
• /
• 2005

EVA microsphere was prepared by a thermally induced phase separation. EVAL microsphere was made by a saponification on sheath of EVA microsphere. And microcapsule with EVA core-PU shell structure was synthesized by interfacial polymerization using diisocyanates with PEG in gelatin aqueous solution as the stabilizing agent. The effects of chemical structure of diisocyanate on the average particle size and distribution, morphology, color strength and friction fastness of core-shell particles were investigated to design microcapsule. The friction fastness of the fabrics printed with EVA core-PU shell microcapsules had the 4-5 grade.

• Carbon letters
• /
• 제12권2호
• /
• pp.102-106
• /
• 2011

Carbon nanotubes (CNTs) have been synthesized by ferrocene-catalyzed pyrolysis of toluene. The influences of the experimental conditions on the morphology and microstructure of the product have been analyzed. To find the proper temperature for synthesis of CNTs, the experiment was performed in a temperature range from 800 to $1100^{\circ}C$. From content variation of ferrocene and thiophene as the catalyst, morphological change of carbon nanotubes has been observed. Also, the influence of the gas ratio of hydrogen and argon on the nanotube samples was analyzed by scanning electron microscopy and transmission electron microscopy.

• Transactions on Electrical and Electronic Materials
• /
• 제8권2호
• /
• pp.58-66
• /
• 2007

In this paper, the process effect on the RMS roughness of the $HfO_2$ thin films grown by metal organic molecular beam epitaxy was investigated. The measured RMS roughness is examined to characterize the surface morphology. In order to analyze the factor effects, the significant factors of both the main and the interaction effects were extracted through the effect analysis. In order to compare the regression model with the variable transformation, the effect of each factor and the model efficiency are calculated. The methodology can allow us to analyze the effects between the process parameters related to the process variability.

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.653-659
• /
• 2010

Friction stir welding results in low distortion and high joint strength compared with other welding procedures, and is able to join all aluminium alloys that are not considered as virtually weldable with classical liquid state techniques. The comparative study on high cycle fatigue properties between A16005-T6 friction stir welds and MIG weld joints have been performed and fracture mechanisms for the fatigue specimens were investigated. Although mechanical properties are lower than the corresponding base material, FSW joints of A16005-T6 become higher at tensile and fatigue strength in comparison with the traditional fusion weld(MIG). The fracture surfaces of FSW and MIG fatigue specimens cleary show different aspects of the fracture morphology. MIG weldments were characterized by voids and cleavage(brittle fracture) but FSW specimens showed the presence of ductile fracture surface.

• 센서학회지
• /
• 제25권3호
• /
• pp.178-183
• /
• 2016

Semiconductor gas sensors based on metal oxide are widely used in a number of applications, from health and safety to energy efficiency and emission control. Nanomaterials including nanowires, nanorods, and nanoparticles have dominated the research focus in this field owing to their large number of surface sites that facilitate surface reactions. Recently, metal oxide hollow structures using soft templates have been developed owing to their high sensing properties with large-area uniformity. Here, we provide a brief overview of metal oxide hollow structures and their gas-sensing properties from the aspects of template size, morphology, and additives. In addition, a gas-sensing mechanism and perspectives are presented.

• 한국수자원학회논문집
• /
• 제30권1호
• /
• pp.15-22
• /
• 1997

하천형성의 중요한 요인이 되는 사행하천의 흐름은 막곡호안에 많은 영향을 준다. 특정한 하천에 대해 하도개량을 적용시키기 위한 일반적인 기준을 기술하기는 어려우나 토목 설계자에게 어떤 원칙과 지침을 제공하는 것은 대단히 중요하다. 본 고정상 실험연구의 목적은 평균유속과 유로만곡부에서의 곡률변경으로 최대 유속의 크기를 구하여 매번의 수리모형실험을 실시하지 않고도 중소하천의 개수에 이용할 수 있는 자료를 제공함에 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.305-305
• /
• 2009

The carbon nano-structured materials could be applied to the fields of advanced fillers, templates, electrode materials, sensor, storage, and absorption materials. The polyacrylonitrile (PAN) based carbon nano-particles provide the remarkable properties of high specific surface area, large pore volume, chemical inertness, and good mechanical stability. In this study, well-defined carbon nano-particles were obtained through pyrolysis of polyacrylonitrile based particles. The precursor nano-particles were prepared by modified aqueous dispersion polymerization using hydrophilic poly(vinyl alcohol) in a water/ N,N-dimethylformamide mixture media. Synthesized precursor nanoparticles have relatively monodisperse particles ranging 80 ~ 250nm. Stable spherical particles are obtained without coagulum or secondary particles in our system. The characteristic of the carbon nanoparticles were investigated in terms of surface area, morphology, and size distribution.

• 한국주조공학회지
• /
• 제29권5호
• /
• pp.198-203
• /
• 2009

In order to manufacture copper ultra fine wire used for bonding wire in integrated circuit package, continuous casting process, which can produce high purity copper rod with small cross section, and wiredrawing process have to be optimized to prevent wire brakeage during entire manufacturing process of fine wire. The optimum condition for producing copper rod with mirror surface has to established by investigation of the effects of several parameters such as withdrawal speed, superheat and rod diameter on grain morphology of the cast rod and on its drawing characteristics to fine wire. The purpose of this study is to propose the optimized process parameters in continuous casting process in order to produce cast rod without internal defects, and to predict microstructure orientation suitable for wire drawing process.

• 천문학회지
• /
• 제37권4호
• /
• pp.179-184
• /
• 2004

We have developed a wide-field imaging camera system, called WICZO, to monitor light of the night sky over extended period. Such monitoring is necessary for studying the morphology of interplanetary dust cloud and also the time and spatial variations of airglow emission. The system consists of an electric cooler a CCD camera with $60\%$ quantum efficiency at 500nm, and a fish-eye lens with $180^{\circ}$ field of view. Wide field imaging is highly desired in light of the night sky observations in general, because the zodiacal light and the airglow emission extend over the entire sky. This paper illustrates the design of WICZO, reports the result of its laboratory performance test, and presents the first night sky image, which was taken, under collaboration with Byulmaro Observatory, on top of Mt. Bongrae at Yongweol in January, 2004.