• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.135-138
• /
• 2005

HDL(Hardware Description Language) is the most important modem tools used to describe hardware, and becomes important as we move to higher levels of abstraction. The HDL has been made brisk use of in analog design, MEMS device[1-2], process related field as well as digital design. The most important characteristics of HDL is Abstraction which is the strongest tool that extend greatly designer's design ability. In this paper by the Modelling Continuum with hierarchical structure of abstraction, we apply UML(Unified Modeling Language) to SoC Design with HDL UML makes an easy and visual description of the various levels of abstraction, and gives designers good flexible modeling capabilty for SoC Design.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.4
• /
• pp.301-311
• /
• 2000

For effective part modifications which is necessary in the design process frequently, variational geometric modeling with constraint management being used in a wide. Most variational geometric modeling methods, however, manage just the constraints about sketch elements used for generation of primitives. Thus, not only constraint propagation but also re-build of various modeling operations stored in the modeling history is necessary iota part geometry modifications. Especially, re-build of high-cost Boolean operations is apt to deteriorate overall modeling efficiency abruptly. Therefore, in this paper we proposed an algorithm that can handle all geometric entities of the part directly. For this purpose, we introduced eight type geometric constraints to the various geometric calculations about all geometric entities in sweepings and Boolean operations as well as the existing constraints of the sketch elements. The algorithm has a merit of rapid part geometric modifications through only constraint propagation without rebuild of modeling operations which are necessary in the existing variational geometric modeling method.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.59-65
• /
• 2020

This paper presents comparative results of configuration modeling and aerodynamic analysis to single-engine airplanes such as C-172, SR-20, and DA40NG. The software OpenVSP was used as an airplane configuration modeling tool. OpenVSP can provide the fastest method to get three-dimensional aircraft configuration from given basic data and drawings of aircraft. Parametric design input in OpenVSP, from given aircraft geometric parameters, was applied to small airplanes mentioned. New aircraft models in this study were reversely designed to coincide with the publicly obtained dimensions of the original aircraft. The basic aerodynamic analysis of newly designed modeling aircraft was performed by the vortex lattice method. Results are shown that the similarity of aerodynamic data obtained except for the lack of DA40NG. In conclusion, the modeling process applied to this work is valuable to obtain conceptual design insight in the reverse design from the small airplanes currently in use for flight training.

• International Journal of CAD/CAM
• /
• v.2 no.1
• /
• pp.13-21
• /
• 2002

It is not possible to exchange parametric information of CAD models based on the current version of STEP. The design intent can be lost during the STEP transfer of CAD models. The Parametrics Group of ISO/TC184/SC4 has proposed the SMCH schema, which includes constructs for exchange of parametric information. This paper proposes a macro-parametric approach that is intended to provide capabilities to transfer parametric information including design intents. In this approach, CAD models are exchanged in the form of macro files. The macro file contains the history of user commands, which are used in the modeling phase. To exchange CAD models using the macro-parametric approach, the modeling commands of several commercial CAD systems are analyzed. Those commands are classified and a set of standard modeling commands has been defined. Mapping relations between the standard modeling commands and the native modeling commands of commercial CAD systems are defined. The scope of the current version is limited to parts modeling, not assemblies.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.4
• /
• pp.307-314
• /
• 2016

Recently, demands on the tapping machine are increased due to the case of a cell phone is changed to metal such as aluminum. The automatic tool changer (ATC) is one of the most important devices for the tapping machine related to the speed and energy consumption of the machine. To reduce the consumed energy and vibration, the dynamic modeling is essential for the ATC. In this paper, inverse dynamic modeling of a novel ATC mechanism is introduced. The proposed ATC mechanism is composed of a double four-bar mechanism with a circular tablet to generate continuous rotation of the tablet. The dynamic modeling is performed based on the Lagrange equation with a modeling for the contact between the four-bar and the tablet. Simulation results for various working conditions are proposed and analyzed for the prototype design. The dynamic modeling can be applied to determine the proper actuator and to reduce the vibration and consumed energy for the ATC machine.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.100-103
• /
• 2008

Recently Development of construction system that subjective operators share and control information efficiently based on the three-dimensional space and design information throughout life cycle of construction project is progressing dynamically. In case of civil structures which are infrastructure, Demand for structure of complex system which has multi-functions such as super and smart bridges and express rails is increasing and system development which computerizes and integrates process of structure design is in need. For that, research about link way between three dimensional modeling data and structure analysis programs should be preceded. In this research, therefore, research about interface design between three dimensional virtual modeling data to automate efficient civil-structure-design and nonlinear finite element analysis program which is made up of reinforced concrete material model that express material's character clearly.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.609-615
• /
• 1998

In recent years there has been an increasing emphasis on shortening design cycles for bringing products to market. This requires the development of computer aided engineering tools which allow analysts to quickly evaluate the effect of design changes on noise, vibration, and harshness. Statistical Energy Analysis (SEA) modeling is a valuable tool for predicting noise and vibration as SEA models are inherently simpler and more robust than deterministic models. SEA modeling can be combined with design sensitivity analysis(DSA) to identify design changes which give the largest performance benefit. This paper describes SEA modeling of an equipment cab. SEA predictions are compared to test data, showing good agreement. The use of design sensitivity analysis in improving cab design is then demonstrated.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.4
• /
• pp.255-264
• /
• 2008

Research that reconstructs a 3D model from a freehand 2D sketch has gained attention since 1990s, when data integration in the CAD/CAPP/CAM/CNC chain was an important issue. However, 2D sketches in the conceptual design phase have not been integrated with the downstream CAD/CAPP/CAM/CNC chain. In this paper, we present a method to interface a freehand sketch modeling to commercial CAD systems by mapping a sketch modeling history to the macro parametric history. We use an extended ISO10303-112 standard to represent the modeling history in a gestural modeling system and translate sketch files to neutral macro files. Macro parametric translators are used to translate netural macro files to commercial CAD files.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.702-706
• /
• 1995

Integration of CAM and CAM information is important in the CIM era. For a CIM system, the feature representation can be a solution to the integration of product model data. These are geometry feature, functional feature, and manufacturing feature in the feature context. This paper proposes a framework to integrate the configuration design method, parametric modeling and the feature modeling method. The concept of design unit which is one level higher than functional feature and parametric modeling concept with functional features have been proposed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.385-390
• /
• 1997

In recent years there has been an increasing emphasis on shortening design cycles for bringing products to market. This requires the development of computer aided engineering tools which allow analysts to quickly evaluate the effect of design changes on noise, vibration, and harshness. Statistical Energy Analysis (SEA) modeling is a valuable tool for predicting noise and vibration as SEA models are inherently simpler and more robust than deterministic models. SEA modeling can be combined with design sensitivity analysis (DSA) to identify design changes which give the largest performance benefit. This paper describes SEA modeling of an equipment cab. SEA predictions are compared to test data, showing good agreement. The use of design sensitivity analysis in improving cab design is then demonstrated.