• KIEAE Journal
• /
• 제17권1호
• /
• pp.23-28
• /
• 2017

Purpose: Many design index that are using in planning phase have been developed. The most popular things among them are Window to Wall Ratio and Surface to Volume Ratio. However there are some limits. Window to Wall Ratio cannot consider building size and Surface to Volume Ratio cannot do Window to Wall Ratio. Accordingly, in this paper, the Window to Floor Ratio was proposed that it can be considered both building size and Window to Wall Ratio. And analyzed correlation of energy demand. Method: For the test, 16 modules with the size of $6m{\times}6m{\times}4m$ were used to make 35 models with the same volume. The simulation was conducted to 945 cases using the window-to-wall ratio of 30, 50 and 70 % in three areas such as Seoul, Gwangju and Jeju and three kinds of windows. And IES_VE was used. Result: The findings above show that the Window to Floor Ratio that can be considered both building size and Window area have to become as design index. It was found out that design criteria with SHGC is necessary, not with the thermal performance (U-value). It is needed to additional analysis about residential building and the effect of 24-hours heating and cooling condition. It plans to carry out research to establish design indicators for climatic conditions in the country and building applications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2331-2336
• /
• 2005

This paper proposes a new haptic device using a parallel mechanism with gimbal type actuators. This device has three legs actuated by 2-DOF gimbal mechanisms, which make the device simple and light by fixing all the actuators to the base. Three extra sensors are placed at passive joints to obtain a unique solution of the forward kinematics problem. The proposed haptic device is developed for an operator to use it on a desktop in due consideration of the size of an average Korean. The proposed haptic device has a small workspace for on operator to use it on a desktop and more sensitivity than a serial type haptic device. Therefore, the motors of the proposed haptic device are fixed at the base plate so that the proposed haptic device has a better dynamic bandwidth due to a low moving inertia. With this conceptual design, optimization of the design parameters is carried out. The objective function is defined by the fuzzy minimum of the global design indices, global force/moment isotropy index, global force/moment payload index, and workspace. Each global index is calculated by a SVD (singular value decomposition) of the force and moment parts of the jacobian matrix. Division of the jacobian matrix assures a consistency of the units in the matrix. Due to the nonlinearity of this objective function, Genetic algorithms are adopted for a global optimization.

• BMB Reports
• /
• 제42권5호
• /
• pp.260-264
• /
• 2009

Tumor necrosis factor-$\alpha$ (TNF-$\alpha$) exhibits cytotoxicity towards various tumor cells in vitro and induces apoptotic necrosis in transplanted tumors in vivo. It also shows severe toxicity when used systemically for the treatment of cancer patients, hampering the development of TNF-$\alpha$ as a potential anticancer drug. In order to understand the structure-function relation of TNF-$\alpha$ with respect to receptor binding, we selected four regions on the bottom of the TNF-$\alpha$ trimer that are in close contact with the receptor and carried out mutagenesis studies and computational modeling. From the study, various TNF-$\alpha$ muteins with a high therapeutic index were identified. These results will provide a structural basis for the design of highly potent TNF-$\alpha$ for therapeutic purposes. By conjugating TNF-$\alpha$ muteins with a high therapeutic index to a fusion partner, which targets a marker of angiogenesis, it could be possible to develop TNF-$\alpha$ based anticancer drugs.

• 한국해안·해양공학회논문집
• /
• 제21권3호
• /
• pp.224-229
• /
• 2009

케이슨식 안벽의 Level I 신뢰성설계를 위한 부분안전계수를 산정하였다. 일계신뢰도법에 의한 부분안전계수는 한계상태함수의 확률변수에 대한 민감도, 목표신뢰도지수, 확률특성치 및 설계특성치 등의 함수로써 표현하였으며 전면조위와 잔류수위에 대해서는 현행설계법과의 연계성을 유지하기 위하여 수정부분안전계수를 새롭게 정의하였다. 수치해석을 통하여 목표신뢰도지수에 대한 부분안전계수를 산정하였으며 지진계수의 확률분포는 극치분포를 사용하였다. 지진계수의 설계치를 적용함에 있어서 재현주기가 길수록 부분안전계수가 작게 산정됨을 확인하였다.

• Earthquakes and Structures
• /
• 제2권2호
• /
• pp.171-187
• /
• 2011

Rational scaling of design earthquake ground motions for tall buildings is essential for safer, risk-based design of tall buildings. This paper provides the structural designers with an insight for more rational scaling based on drift and input energy demands. Since a resonant sinusoidal motion can be an approximate critical excitation to elastic and inelastic structures under the constraint of acceleration or velocity power, a resonant sinusoidal motion with variable period and duration is used as an input wave of the near-field and far-field ground motions. This enables one to understand clearly the relation of the intensity normalization index of ground motion (maximum acceleration, maximum velocity, acceleration power, velocity power) with the response performance (peak interstory drift, total input energy). It is proved that, when the maximum ground velocity is adopted as the normalization index, the maximum interstory drift exhibits a stable property irrespective of the number of stories. It is further shown that, when the velocity power is adopted as the normalization index, the total input energy exhibits a stable property irrespective of the number of stories. It is finally concluded that the former property on peak drift can hold for the practical design response spectrum-compatible ground motions.

• 한국BIM학회 논문집
• /
• 제12권1호
• /
• pp.23-34
• /
• 2022

In the current 2D-based design, design reliability is lowered due to interference and inconsistency between plans, errors in drawings and quantities, etc. At the time of transition to BIM-based 3D design, it is necessary to expand the reliability and usability of BIM by eliminating these errors from the design stage through securing the quality of the BIM digital model. Therefore, in the railway infrastructure design stage, the quality management process and standards of the BIM digital model were defined and quality management index were developed. Based on the rule extracted from the quality management index, a pilot quality management was conducted in connection with the commercial Model-Checker rule, problems and improvement plans were derived, and a rule-based automated quality management plan was prepared.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.553-554
• /
• 2011

• International Journal of Advanced Culture Technology
• /
• 제8권3호
• /
• pp.123-132
• /
• 2020

In contemporary times, there is an increasing demand for a dedicated healthcare environment, all over the world. The main motivation for this demand is the level of awareness manifested by the users and reflected on their expectations. Therefore new research strategies and design actions are investigated in order to answer to the users' needs and to provide objective design tools for the specialist. This study continues a series of previous developments of the Healthcare Environment Color Index that should be used for public facilities in Korea and abroad. The cross-cultural approach is a new opportunity for exchanging know-how and for testing and calibrating the perception of the users on the color index. The gathering of results was made based on the online survey provided in this phase in English version for the Romanian users. The survey was intended as an objective mean of research and an efficient way of disseminating information on the subject thus contributing to increasing the level of awareness of the users. A total of 86 Romanian and 89 Koreans with valid answers took part in the survey. Comparative visualizations of the results showed significant similarities concerning the patterns of color preferences but also cultural and emotional differences. As a result both categories of users proved to be aware of the relation between healthcare environment color and its effects on health. They also showed a common understanding on the potential of the color index. As a result the most appealing colors to be applied to the healthcare environment were the series G and B, and the most effective ones were proved to be the ranges of high lightness and low saturation but also the medium high lightness and medium saturation. Both the similarities and the differences of choice between Romanians and Koreans show that cultural and emotional differences of color recognition are important and that should be taken into consideration in design, in order to generate an inclusive and efficient healthcare environment.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.416-421
• /
• 2007

Physical damage to fruits and vegetables caused by shock degrades the value of product in the fresh market. In order to design a product/packaging system to protect the product, the G-factor to the product that causes shock damage needs to be determined. The shock fragility of organisms such as fruits with a concept correspondent to the G-factor of industrial products was calculated and we defined the allowable bio-shock fragility index as the value divided peak acceleration that was generated in safe drop height by standard acceleration of gravity. We did modeling for safe drop hight that would prevent fruits from damage by drop tests and tried to estimate the allowable bio-shock fragility index of pears and apples for optimum packaging design. The bio-shock fragility index of pears was in the range of $0.74{\sim}2.29\;G$, while apples had a slightly higher value than that of pears, of $0.51{\sim}2.98\;G$. This result shows accordance with the general fact that apples have a firmer structure and get less damage from the same impact. Based on this result, it is possible to create an optimum packaging design by providing a damage standard by impact.

• 한국건설관리학회논문집
• /
• 제23권5호
• /
• pp.98-107
• /
• 2022

본 연구의 목적은 플랜트 건설사업에서 모듈러 설계대안에 대한 위험기반의 평가지수를 도출하는 모델을 제안하는 것이다. 이에 따라 ① 기초사업비와 모듈을 적용하는 대상과 범위를 설정하는 단계, ② 설계, 구매, 제작, 운송, 시공업무에 대한 중요도, 편리성, 효율성 지수를 평가하는 단계, ③ 중요 위험사건의 영향에 따른 경제적 손실을 예방하기 위해서 필요한 예비비를 분석하여 총사업비를 추정하는 단계, ④ 모듈 설계대안별로 평가된 관리업무의 효율성 지수와 총사업비를 비교하여 RVI를 도출하는 단계로 구성하였다. 그리고 모델의 사용성을 검증하기 위해서 Module Plan-A는 Pipe Rack을 모듈로 적용하는 경우, Module Plan-B는 Steel Structure, Pipe Rack, Process Module을 모듈로 적용하는 경우로 설정하여 관리업무의 중요도, 편리성, 효율성 지수를 평가하고 위험예비비를 포함하여 총사업비를 추정하였다. 이와 같은 과정으로 모델을 검증한 결과, 1개의 공종에 모듈을 적용한 Module Plan-A 보다 3개의 공종에 모듈을 적용한 Module Plan-B가 관리업무의 효율성은 낮은 것으로 나타났지만, 기초사업비에서 간접비가 절감되어 종합적인 RVI는 높게 평가되었다.