• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.257-262
• /
• 2019

Lattice steel towers for overhead transmission lines have been replaced by tubular steel poles due to the visual impact of large and complex shape of truss type. Demand for tubular steel poles consisting of a single frame member continues to grow because of its advantages such as visual minimization, architectural appeal and minimal site consumptions. However, there are some constraints on the transportation and construction. As the diameter of tower base has been enlarged, it may exceed minimum height limit required to pass the tunnel in case of land transportation. Also, in a narrow place where it is not easy to secure the installation areas such as mountainous places, there might be some areas wherein it must secure a wide working space so that large vehicles and working cranes will be allowed to enter. In this paper, we presented a vertical separated tubular steel pole, which is a new type of support that can be implemented for general purpose such as mountainous areas or narrow areas to improve the issues raised by breaking away from the conventional design and fabrication methods. Technical approaches for overcoming the limit of the cross-sectional size is to separate and modularize the cross-section of the tubular steel pole designed with a size that cannot be carried or assembled, and to lighten it with a weight capable of being transported and assembled in a narrow space or mountainous area. As a result of this research, it will be possible to enter small and medium sized vehicles in locations where it is restricted to transport by large-sized vehicles. In the case of mountainous areas, it will be possible to divide it into a weight capable of being carried by a helicopter and it will be easy to adjust and fabricate it with individual modules. Furthermore, in order to break away from the traditional construction method, we proposed the equipment that can be applied to the assembly of Tubular Steel Pole without using a large crane in locations where there is no accessible road or in locations wherein large cranes cannot enter. In particular, this paper shows the movable assembling equipment and some methods that are specialized for vertical separated tubular steel pole consisting of members with reduced weight. The proposed assembly equipment is a device for assembling the body of the Tubular Steel Poles. It will be installed inside the support and the modules can be lifted by using the support itself.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.96-103
• /
• 2018

An analysis using a statistical method is generally used to determine the effective temperature based on the temperature design load of a bridge. In this study, the effective temperature was calculated by building an artificial neural network (ANN) capable of improving the statistical method. A Steel box girder bridge specimen was made with a width of 2.0 m, height of 2.0 m, and length of 3.0 m and 0.2 m the upper slab. Twenty one temperature gauges were attached to measure the temperature between 2014 and 2016 for three years. An ANN was learned using the data measured from 2014~2015 and the results were compared with the Euro codes. The error rate between the Euro code and statistical analysis values was analyzed to be 4.1 % for the total measurement point. The ANN was verified and the effective bridge temperatures were calculated using the temperature data measured in 2016. The results revealed an approximate 3.97 % difference from the statistical analysis values. This degree of error is considered to be acceptable in terms of engineering for the analysis of an ANN. An ANN can easily predict the effective temperature of a bridge by knowing the input values of the region's highest temperature, bridge type, and upper asphalt thickness when designing the bridge's temperature loads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.672-682
• /
• 2020

The Korea Nowadays, which is research on digital twin technology for efficient operation in various industrial/manufacturing sites, is being actively conducted, and gradual depletion of fossil fuels and environmental pollution issues require new renewable/eco-friendly power generation methods, such as wave power plants. In wave power generation, however, which generates electricity from the energy of waves, it is very important to understand and predict the amount of power generation and operational efficiency factors, such as breakdown, because these are closely related by wave energy with high variability. Therefore, it is necessary to derive a meaningful correlation between highly volatile data, such as wave height data and sensor data in an oscillating water column (OWC) chamber. Secondly, the methodological study, which can predict the desired information, should be conducted by learning the prediction situation with the extracted data based on the derived correlation. This study designed a workflow-based training model using a machine learning framework to predict the pressure of the OWC. In addition, the validity of the pressure prediction analysis was verified through a verification and evaluation dataset using an IoT sensor data to enable smart operation and maintenance with the digital twin of the wave generation system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.4
• /
• pp.221-225
• /
• 1974

The field experiment was conducted to find out the effect of inoculation of Rhizobium and interaction between amount of nitrogen and inoculating in soybean with 4 replicated split plot design. Main plot was 4 level of nitrogen 0, 2, 6, 12kg/10a and subplot was inoculation and uninoculation. The results are summarized as follows. 1. The yield of soybean did not show any significant difference among nitrogen level or between inoculating but yield of inoculated plot was a little increased than that of uninoculation. 2. At four leaves stage and flowering stage, the weight of nodules in root was decreased with incresing amount of nitrogen significantly and uninoculation caused a reduction compared with modulation significantly and those tendency was same in plant height, and those difference among treatment was more distinct in four leaves stage than in flowering stage. 3. After harvest, total nitrogen content in soil was not only increased with increasing nitrogen level but also was more increased in inoculated plot than in uninoculated plot except nitrogen 0kg/10a level. Inoculation of Rhizobium raised 15kg of nitrogen per l0a at 6kg nitrogen level compared with uninoculation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.2
• /
• pp.193-202
• /
• 1998

The purpose of this study was to understand clothing condition of elderly men focusing on somatotype variation and satisfaction with ready-to-wear and to provide basic data in designing ready-to-wrar for the elderly men. The questionnaire method was used and one-to-one interviews were held for the elderly residents in Seoul, Deajon, Jonju, and Yeosu areas. The total of 275 questionnaires (from 148 elderly men in the 60's, 99 in the 70's and 28 in the 80's) were collected and used for statistics. SAS package was used for the statistics and the statistics were based on frequency, X2-test, ANOVA, Duncan's multifle range test. The results of the study were as follows; 1) Height (p< .05), weight (p< .001) and Rohrer index (p< .05) decreased significantly with ageing 2) The somatotypes of 75.6% were changed and the 70's 8t the 80's showed significantly (p< .05) higher changing rate compared to the 60's and more changes took place significantly (p< .001) with ageing. 3) The most preferred out wear was suit & tie and next was jumper or shirt. 4) For the mode of getting suit, the highest number 55.3%) purchased ready-to-wear, next (32.0%) was tailored and the least (12.7%) neither purchased nor tailored. The percentage of buying ready-to-wear significantly (p< .01) decreased with ageing. The main reason for getting tailor-made was not well fitting of ready-to-wear (20.7% out of 32.0%). And for the mode of getting suit, there was significant differance with income (p< .001) and pocket money (p< .01). 5) The most important factors in suit and shirt werefirst, size (fitness) and second, comfort in movement. 6) For the wearing feeling of suit, 55.3% showed discomfort. There was significant difference according to the age (p< .05) and pocket money (p< .05). The Discomfort increased with ageing and less pocket money. 7) 62.4% answered it uneasy to Pick out well fitting If comfortable suit. This showed their dissatisfaction with ready-to-wear. 8) As for the items of not well fitting, 64.4% answered in jacket, 60.8% in trousers, 46.0% in shirt. The above result shows that elderly men's somatotype changes as they age, suit is found uncomfortable and it's not easy for elders to pick out comfortable ready-to-wear. So, they seem to have a certain dissatisfaction in ready to wear. Therefore, there is a need for reorganization of size and developing pattern design according to measurement of elderly men.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.238-242
• /
• 2003

Reclaimed tidal areas for rice cultivation are irrigated with salt mixed water when there is severe drought. Therefore, we identified the critical concentration of saline water for rice growth on a reclaimed saline soil in Korea. The experiment was conducted at the Kyehwado substation of the National Honam Agricultural Experiment Station (NHAES) during 2001-2002. Two experimental fields with 0.1-0.2% for low soil salinity and 0.3-0.4% for medium soil salinity levels were used. The experiment involved four levels of salt solution mixed with sea water (at 0.1, 0.3, 0.5, 0.7%) compared with a control using tap water in a split-plot design with three replicates. Saline solution was applied only two times at seedling stage (10 DAT and 25 DAT) for 5 days. Gyehwabyeo and dongjinbyeo, japonica rice varieties, were used in this experiment. Plant height and number of tillers sharply decreased in the 0.5% saline water in low soil salinity level and 0.1% in medium soil salinity level. For yield components, panicle number per unit area and percentage of ripened grain dramatically decreased in the 0.5% saline water in low soil salinity and 0.1% in medium soil salinity level. But 1,000-grain weight of brown rice decreased sharply in the 0.5% saline water in low soil salinity and 0.3% in medium soil salinity, indicating that this component was not much affected unlike other yield components. Milled rice yield decreased significantly with saline water level in both low and medium soil salinity. In the 0.7% low saline soil, the yield index was only 36% compared with the control. In medium soil salinity, even the control plot showed only 62% yield index compared with the control in the low soil salinity treatment. Results indicated that the critical concentration of saline water for rice growth in terms of economical income of rice production was 0.5% in low soil salinity and tap water in medium soil salinity.

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.243-255
• /
• 2010

The slope design of an open-pit mine must consider economical efficiency and stability. Thus, the overall slope angle is the principal factor because of limited support or reinforcement options available in such a setting. In this study, slope displacement, as monitored by a GPS system, was analyzed for a coal mine at Pasir, Indonesia. Predictions of failure time by inverse velocity analysis showed good agreement with field observations. Therefore, the failure time of an unstable slope can be roughly estimated prior to failure. A GIS model that combines fuzzy theory and the analytical hierarchy process (AHP) was developed to assess slope instability in open-pit coal mines. This model simultaneously considers seven factors that influence the instability of open-pit slopes (i.e., overall slope gradient, slope height, surface flows, excavation plan, tension cracks, faults, and water body). Application of the proposed method to an open-pit coal mine revealed an enhanced prediction accuracy of failure time and failure site compared with existing methods.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.102-112
• /
• 1999

The purpose of this study is to evaluate the effects of design criteria and environmental conditions of the site of created tidal flats on the structure and function of man-made ecosystem. Seven constructed tidal flats and three natural tidal flats were studied taking the difference in the location (wave height and tidal current), inflow of river water, slope of tidal flat and age after the construction completed into consideration. Parameters studied were physico-chemical and biological characteristics of soils and rate of respiration. The natural tidal flats had higher contents of silt, nitrogen and organic matter compared with the constructed ones. The natural ones had reductive zone below 2cm, whereas the constructed ones had aerobic zone from the surface to below 20cm. The bacterial population in the soil of the constructed tidal flats was one to two orders of magnitude lower than that in the natural ones. Both biomass of macrobenthos and microbial respiration rate, however, were not different significantly between the natural and the constructed tidal flats. There was an exceptional constructed tidal flat with similar physico-chemical and biological characteristics to the natural ones. It is most probable that sufficient conditions to have similar tidal flats to natural ones are the location in enclosed bay or calm coastal area. Thus, to make man-made tidal flats with the same characteristics as those in natural ones, man-made tidal flats should be designed and/or located to enhance the accumulation of silt on tidal flat. It is important to select a place having low water motion for construction of tidal flat.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.2
• /
• pp.121-126
• /
• 1999

Manure management is a top priority on both dairy and swine farrns at present. This experiment was carried out to determine the effect of different types and N rates of liquid manure on forage yield and quality of oats(Avena sativa L.) in Suweon, 1997. Seven treatments consisting of chemical fertilizer $120kg\;N\;ha^{-1}$, liquid cattle manure 120, 240 and $360kg\;N\;ha^{-1}$, and liquid swine manure 120, 240 and $360kg\;N\;ha^{-1}$ were arranged in a randomized complete block design with three replications. As increasing N rate of the liquid manure, the plant height was increased, but dry matter content of oats was decreased as increasing liquid manure N rate. There were significant differences in dry matter yield of oats among the liquid manure N rates(P<0.05). Crude protein(CP) content of oats ranged from 14.7 to 24.1% (P<0.05), and CP yield was orderly ranked as liquid swine manure $360kg\;N\;ha^{-1}$>liquid cattle manure $360kg\;N\;ha^{-1}$>liquid swine manure $240kg\;N\;ha^{-1}$(P<0.05). Acid detergent fiber(ADF) content of the liquid cattle manure treatment showed a slightly higher than that of the liquid swine manure treatment(P<0.05). Neutral detergent fiber(NDF) content of the liquid cattle manure treatment was lower than that of the liquid swine manure treatment(P<0.05). Relative feed value(RFV) of the liquid cattle manure treatment decreased with increasing liquid manure N rates compared with that of the liquid swine manure treatment. Based on the results of this experiment, it is indicates that to increase the N rates from liquid manure application could be obtained from the increase of forage yield.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.19-24
• /
• 2020

The interest in renewable energy is increasing due to the depletion of fossil fuels. In particular, active research on wave power, which is highly predictable and abundant, is being conducted. The coaxial accelerator-type wave power generator used in this study was designed to improve the power generation efficiency by converting bidirectional linear motion into a rotational force. In an offshore engineering basin, waves were generated, and case tests were performed according to the wave period and wave height. The experimental results were verified by the theoretical method related to the frequency response, and the overall trend was confirmed to be consistent. These results are expected to be useful in estimating the power of wave generators and designing parameters to improve the efficiency of wave energy in the design stage before manufacturing. In addition, the manufacturer can predict the wave energy efficiency of wave generators, which can reduce the development time and cost by preventing trial and error processes.