• Physical Therapy Rehabilitation Science
• /
• 제10권1호
• /
• pp.16-21
• /
• 2021

Objective: To control the rate at which body weight drops, forefoot initiates floor contact with the limb relatively extended at each joint. However, when the knee joints could not extend enough with going down the stairs, the forefoot cannot be contact initially. The purpose of this study was to investigate the differences between forefoot and whole foot in initial contract on soleus and tibialis anterior for health young adults when descending stairs. Design: A cross-sectional observational study design. Methods: Fifteen healthy young adults participated in this study. To compare between forefoot and whole foot in initial contact when going down the stairs, this study measured muscle activation on soleus and tibialis anterior. This study used the paired t-test to analyze the collected data and compare the supporting conditions. Results: After analyzing, the muscle activation of soleus was not statistically significant difference as 25.16% at forefoot initial contact and 24.37% at whole foot initial contact when descending stairs (p>0.05). However, the muscle activation of tibialis anterior muscle was significantly difference was 49.19% at forefoot contact and 71.55% at whole foot contact. Conclusions: The results of this study was that the muscle activation of the tibialis anterior was a higher at whole foot contact than that at fore foot contact when descending stairs. This study suggests that the landing strategy of the initial contact is a beneficial effect at the forefoot contact to maintain the postural balance and the muscle performance effectively when descending stairs in individuals with healthy young adults.

• Advances in nano research
• /
• 제14권3호
• /
• pp.211-224
• /
• 2023

This work presents a modified analytical model for the bending behavior of axially functionally graded (AFG) carbon nanotubes reinforced composite (CNTRC) nanobeams. New higher order shear deformation beam theory is exploited to satisfy parabolic variation of shear through thickness direction and zero shears at the bottom and top surfaces.A Modified continuum nonlocal strain gradient theoryis employed to include the microstructure and the geometrical nano-size length scales. The extended rule of the mixture and the molecular dynamics simulations are exploited to evaluate the equivalent mechanical properties of FG-CNTRC beams. Carbon nanotubes reinforcements are distributed axially through the beam length direction with a new power graded function with two parameters. The equilibrium equations are derived with associated nonclassical boundary conditions, and Navier's procedure are used to solve the obtained differential equation and get the response of nanobeam under uniform, linear, or sinusoidal mechanical loadings. Numerical results are carried out to investigate the impact of inhomogeneity parameters, geometrical parameters, loadings type, nonlocal and length scale parameters on deflections and stresses of the AFG CNTRC nanobeams. The proposed model can be used in the design and analysis of MEMS and NEMS systems fabricated from carbon nanotubes reinforced composite nanobeam.

• 한국가스학회지
• /
• 제22권2호
• /
• pp.90-96
• /
• 2018

천연가스 및 석유를 정제 및 가공하는 화공플랜트에서 원료에 함유된 황화수소($H_2S$)의 누출로 인한 피해를 최소화시키기 위한 설계 기법들이 세계적으로 널리 연구되어왔다. 그러나 국내에서는 화공플랜트에서 $H_2S$ 가스 피해 최소화를 위한 별도의 뚜렷한 설계 지침 및 규제가 없는 실정이다. 그러므로 본 연구는 $H_2S$ 독성가스감지기를 설치해야 할 공정설비의 $H_2S$ 가스 함량의 정량적 기준을 500 ppm으로 제시하고 타당한 근거를 설명하였다. 또한 ALOHA 프로그램을 사용하여 과거 $H_2S$ 가스 누출 사고를 재구성하여 IDLH 값인 100 ppm까지의 확산 반경을 산출하였다. 모델링의 기상 조건은 국내 3대 석유화학단지가 위치한 울산, 여수, 대산의 조건을 각각 적용하였으며, 울산, 대산, 여수 순서로 긴 반경이 도출되었다. 비상시 안전을 위해서 본 연구에서 얻은 $H_2S$ 가스의 100 ppm까지의 확산 반경을 고려한 추가적인 $H_2S$ 독성가스감지기가 설치되어야 하고, 이때는 반드시 지역별 기후조건이 고려되어야 할 것이다.

• 한국프랜차이즈경영연구
• /
• 제9권3호
• /
• pp.19-29
• /
• 2018

Purpose - Due to the increase in coffee consumption and competition, domestic coffee franchise companies are currently entering the overseas market. Therefore, coffee franchise companies are pursuing a variety of marketing strategies to meet customer needs and gain competitive advantage in overseas markets. From this perspective, overseas franchise companies need to ensure that their servicescapes meet the needs of their overseas customers. For these purposes, the study is to identify the impact servicescapes on customer satisfaction and customer loyalty focused on Global Coffee Franchise Company "C", which extended its business worldwide in Mongolia. Research design, data, and methodology - The data were collected from customers who had visited the stores of 'C' company in Ulaanbaatar, Mongolia. 435 valid questionnaires collected through online survey coded and analyzed using frequency, confirmatory factor analysis, correlations analysis, and structural equation modeling with SPSS 24 and SmartPLS 3.0. Result - Firstly, seating comfort, facility aesthetics, and cleanliness, ambient conditions among servicescapes influenced customer satisfaction. Secondly, servicescapes didn't affect the loyalty directly. Third, customer satisfaction had positive effect on loyalty. Fourthly, cleanliness which was ranked lower in Korea had a great effect on customer satisfaction in Mongolia. Fifthly, IPMA(Importance-performance map analysis) shows that the importance of servicescapes is higher for women than for men, and facility aesthetics for female and cleanliness is the most important for male. Conclusions - The results of this study show that there is a positive (+) effect on customer satisfaction in order of cleanliness, ambient conditions, aesthetics, and seating comfort. Therefore, franchise companies considering or advancing into Mongolia should consider importance in order of cleanliness, ambient conditions and aesthetics when entering Mongolia market. For example, franchise managers should select Monday as a "clean day," and all merchants should spend all of their open hours and keep their stores clean in accordance with the head office manual. In addition, franchise managers need to hire a VMD (visual merchandising) experts to build up a physical environment that will effectively highlight the space-specific display of the store so that Mongolian local customers can have a satisfactory climate and aesthetics. And, the IMPA analysis between servicescapes and customer satisfaction shows that women are more susceptible to servicescapes than men. Especially, in the case of women, the importance of esthetics is high, but the performance is low. Thus, if the aesthetics are actively improved, customer satisfaction can be effectively increased.

• Korean Chemical Engineering Research
• /
• 제54권6호
• /
• pp.838-846
• /
• 2016

산업체에서 많이 사용되는 연소공정은 배가스 성분의 회수나 제거를 필요로 한다. 최근에는 배가스로부터 이산화탄소를 회수하기 위해 제올라이트 13X를 사용하는 MBA(이동상흡착) 공정이 개발되었다. 본 연구에서는 제올라이트 13X에 대한 이산화탄소, 질소, 이산화황 및 수증기의 흡착 실험을 수행하여 흡착평형 및 고체입자 안으로의 흡착속도를 조사하였다. 여러 실험온도에서의 흡착데이터를 Langmuir, Toth, Freundlich 등온흡착식에 적용하여 각 흡착등온식의 파라미터를 구했고, 이론식에 의한 예측값과 실험데이터가 잘 일치함을 확인하였다. 이산화황과 수증기가 불순물로 존재할 경우에 주성분인 이산화탄소의 흡착량을 측정하였다. 이성분 흡착 데이터는 순수 성분에 대해 얻어진 파라미터를 extended Langmuir 등온흡착식에 적용하여 예측한 결과와 잘 일치하였다. 다만, $H_2O$ 불순물이 대략 ${\sim}10^{-5}H_2O\;mol/g$ zeolite 13X 이하 존재할 때에는 $CO_2$ 흡착량이 순수 $CO_2$의 흡착보다 오히려 소량 증가하는 현상이 관찰되었다. 실험으로 측정한 흡착속도를 구형 입자 확산모델에 적용하여 이산화탄소, 이산화황, 질소, 수분의 확산계수와 활성화에너지를 구했다. 미량의 불순물이 흡착되어있을 때는 이산화탄소나 이산화황의 확산계수가 줄어들었다. 본 연구에서 얻어진 파라미터 값들은 실제 흡착공정의 설계에 유용할 것이다.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.25-34
• /
• 2009

큰 휨 지지력을 제공하는 테두리 보가 없이 기둥과 바닥판만으로 구성된 플랫 플레이트 시스템은 응력 조건뿐만 아니라 사용성 조건에 의하여 구조적 성능이 결정될 수 있다. 시공 순서 및 그에 따른 동바리로 연결되어 있는 슬래브들 간의 시공 하중 분포에 대한 영향이 플랫 플레이트의 단기 및 장기 성능에 대한 중요한 영향 요소가 될 수 있다. 이 연구에서는 슬래브 처짐 산정을 위하여, 선형해석 프로그램을 이용하여 시공 순서 및 콘크리트 균열효과를 고려할 수 있는 실용해석 기법을 제시한다. 구조설계기준에서 제시하고 있는 1방향 휨부재의 처짐 산정을 위한 유효단면 2차 모멘트의 개념을 2방향 슬래브 시스템인 플랫 플레이트의 유한요소해석에 확장하여 적용한다. 플랫 플레이트 시스템의 처짐에 대한 시공 중 과하중의 영향을 분석하기 위하여, 간편법에 의하여 산정된 시공 하중의 지배조건들에 대하여 제안된 실용해석 기법을 적용한다.

• 한국전산구조공학회논문집
• /
• 제17권1호
• /
• pp.39-47
• /
• 2004

본 연구에서는 경계 요소법을 이용하여 2차원 비등방성 탄성체의 손상 규명을 수행한다. 경계에서의 적분항만을 포함하는 본 수치모델은 1차원으로 줄게된다. 이러한 장점은 특히 균열 역학과 같은 문제에 있어서 중요한 의미를 갖는다. 또한 일정 영역을 분할하는 기법을 피함으로서 수치해석 과정을 간편하고 효율적으로 수행할수 있기 때문에 역문제 해결에 있어서 장점을 갖는다. 본 연구에서는 기존의 등방성 재료에 대한 비파괴 추정기법을 복합신소재와 같은 비등방성 재료로 이루어진 탄성체의 해석에 대하여 확장한다. 먼저 경계요소법에 의한 수치모델의 타당성을 기존의 문헌과 비교 검증하며, 서로 다른 특성을 보이는 비등방성 형식의 변화에 따라 실제 측정시 발생하는 노이즈 영향을 분석한다. 수치예제는 적층 형태 및 하중조건에 대하여 수행하며, 결함 추정에 미치는 적층 형태의 영향을 시험한다.

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1423-1450
• /
• 2015

The paper presents the details and results of an experimental study on bolted end-plate joints of industrial type steel building frames. The investigated joints are commonly used in Lindab-Astron industrial buildings and are optimized for manufacturing, erection and durability. The aim of the research was to provide an experimental background for the design model development by studying load-bearing capacity of joints, bolt force distribution, and end-plate deformations. Because of the special joint details, (i.e., joints with four bolts in one bolt-row and HammerHead arrangements), the Eurocode 3 standardized component model had to be improved and extended. The experimental programme included six different end-plate and bolt arrangements and covered sixteen specimens. The steel grade of test specimens was S355, the bolt diameter M20, whereas the bolt grade was 8.8 and 10.9 for the two series. The end-plate thickness varied between 12 mm and 24 mm. The specimens were investigated under pure bending conditions using a four-point-bending test arrangement. In all tests the typical displacements and the bolt force distribution were measured. The end-plate plastic deformations were measured after the tests by an automatic measuring device. The measured data were presented and evaluated by the moment-bolt-row force and moment-distance from centre of compression diagrams and by the deformed end-plate surfaces. From the results the typical failure modes and the joint behaviour were specified and presented. Furthermore the influence of the end-plate thickness and the pretension of the bolts on the behaviour of bolted joints were analysed.

• 한국강구조학회 논문집
• /
• 제30권2호
• /
• pp.87-96
• /
• 2018

본 연구는 유한요소해석을 적용하여 고강도 알루미늄 합금(7075-T6)의 2개 볼트로 구성된 일면전단 볼트접합부의 구조거동과 면외변형에 의한 최대내력에 미치는 영향을 조사하는 것을 연구목적으로 한다. 볼트접합부의 구조거동을 예측하는데 있어 기존실험결과와 해석결과의 비교를 통해 유한요소해석의 타당성을 검증하였다. 면외변형 발생으로 볼트접합부의 내력저하정도를 정량적으로 평가하였다. 연단거리에 대한 추가적인 변수해석이 수행되었고 하중방향연단거리와 하중직각방향연단거리에 따른 면외변형 발생조건을 제시하였다. 최종적으로 알루미늄 합금 7075-T6 볼트접합부에 대한 면외변형의 영향을 고려한 수정내력식을 제안하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.563-574
• /
• 2008

Most of earthquake-induced geotechnical hazards have been caused by the site effects relating to the amplification of ground motion, which are strongly influenced by the local geologic conditions such as soil thickness or bedrock depth and soil stiffness. In this study, an integrated GIS-based information system for geotechnical data, called geotechnical information system (GTIS), was constructed to establish a regional counterplan against earthquake-induced hazards at an urban area, Daejeon, which is represented as a hub of research and development in Korea. To build the GTIS for the area of interesting, pre-existing geotechnical data collections were performed across the extended area including the study area and a walk-over site survey was additionally carried out to acquire surface geo-knowledge data. For practical application of the GTIS used to estimate the site effects at the area of interesting, seismic microzoning map of the characteristic site period was created and presented as regional synthetic strategy for earthquake-induced hazards prediction. In addition, seismic zonation for site classification according to the spatial distribution of the site period was also performed to determine the site amplification coefficients for seismic design and seismic performance evaluation at any site in the study area. Based on the case study on seismic zonations at Daejeon, it was verified that the GIS-based GTIS was very useful for the regional prediction of seismic hazards and also the decision support for seismic hazard mitigation.