• Structural Engineering and Mechanics
• /
• 제6권6호
• /
• pp.633-641
• /
• 1998

Finite element solutions are presented for the optimal design of symmetrically laminated rectangular plates with various types of internal line supports. These plates are subject to a combination of simply supported, clamped and free boundary conditions. The design objective is the maximisation of the biaxial buckling load. This is achieved by determining the fibre orientations optimally with the effects of bending-twisting coupling taken into account. The finite element method coupled with an optimisation routine is employed in analysing and optimising the laminated plate designs. The effect of internal line support type and boundary conditions on the optimal ply angles and the buckling load are numerically studied. The laminate behavior with respect to fibre orientation changes significantly in the presence of internal line supports as compared to that of a laminate where there is no internal supporting. This change in behavior has significant implications for design optimisation as the optimal values of design variables with or without internal supporting differ substantially.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.69-77
• /
• 1999

Roll profile design in spape rolling with a complex-shaped part depends on the designer's experience, which is general, is acquired through costly trial-and-error process. As a prerequisite for developing a scientific approach to roll profile design, we present a finite element model to simulate 3-D deformation of complex-shaped parts occuring in multi-pass sequence. Demonstrated is the process model's capability to deal with rolling of a complex-shaped part.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.816-819
• /
• 2002

This paper is the study on stress analysis for tooth modification of high speed gear using a finite element method. Gear drives constitute very important mechanisms in transmitting mechanical power processes compromising several cost effective and engineering advantages. The load transmission occurred by the contacting surfaces arises variable elastic deformations which are being evaluated through finite element analysis. The automatic gear design program is developed to model gear shape precisely. This gear design system developed was used by pre-processor of FEM packages. The distribution of stresses at contacting surfaces was examined when gear tooth contacts. And this paper proposes method for the tooth modification after carrying out stress analysis using a finite element method.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.162-167
• /
• 2003

This paper is the study on stress analysis for tooth modification of high speed gear using a finite element method. Gear drives constitute very important mechanisms in transmitting mechanical power processes which compromise several cost effective and engineering advantages. The load transmission which occurred by the contacting surfaces arises variable elastic deformations evaluated through finite element analysis. The automatic gear design program was developed to model gear shape precisely. This developed gear design system was used by pre-processor of FEM packages. The distribution of stresses at contacting surfaces was examined when gear tooth contacts. And this paper proposes a method for the tooth modification after carrying out stress analysis using a finite element method.

• Structural Engineering and Mechanics
• /
• 제8권1호
• /
• pp.73-84
• /
• 1999

This paper is concerned with shape optimization problems by the boundary element method (BEM) emphasizing the use of a reduced basis reanalysis technique proposed recently by the author. Problems of this class are conventionally carried out iteratively through an optimizer; a sequential quadratic programming-based optimizer is used in this study. The iterative process produces a succession of intermediate designs. Repeated analyses for the systems associated with these intermediate designs using an exact approach such as the LU decomposition method are time consuming if the order of the systems is large. The newly developed reanalysis technique devised for boundary element systems is utilized to enhance the computational efficiency in the repeated system solvings. Presented numerical examples on optimal shape design problems in electric potential distribution and elasticity show that the new reanalysis technique is capable of speeding up the design process without sacrificing the accuracy of the optimal solutions.

• 한국정보통신학회논문지
• /
• 제6권4호
• /
• pp.589-594
• /
• 2002

Hairpin 형태의 필터는 크기를 작게 설계할 수 있지만 설계방법이 복잡하다는 단절이 있다. 본 논문에서는 기존의 전송선로 이론과 J 인버터 회로를 이용하여 Hairpin Line 필터 설계에 새롭게 적용하였으며, 설계하는데 필요한 J 와 b 파라미터를 정확히 구하는 방법을 제시하고 있다. 인접하는 소자간의 상호 결합이 없는 부분을 고려하였으며, 각 단에서의 결합성분에 대한 전기적인 결합선로 길이를 J 와 b 파라미터로부터 구할 수 있다. 제시하고 있는 설계방법으로 Serenade 8.0을 이용하여 중심 주파수 2.6GHz에서 동작하는 소형의 Hairpin Line 대역 통과 필터를 설계하고 컴퓨터 시뮬레이션을 통하여 특성을 확인하였다.

• 복식
• /
• 제55권2호
• /
• pp.45-57
• /
• 2005

The creative fashion design is the technique which ran be obtained through the structural analysis of the relationship between principle, element-combination and idea-expression. In the research, as the results of theoretical survey of design structure and idea-expression, the structural and subjective designs are classified and defined: a. the structural design is analyzed with the existing examples based on the combinational Idea-expression of the O.C.L method, and b. the subjective design is also analyzed connecting the real examples to Cordon method, Synetic method, Association method, and expansive idea-expression-method obtained by the Experiences of Geometrical Combinations. The research can be summarized as follows: 1. The creative fashion design which emphasizes the geometrical structure utilizes the modification method whirh combines the shapes and constructs extraordinary structural beauty coming from the complex structural principle, that is, emphasis and balance. 2. The creative fashion design which emphasizes specific subjects utilizes the modification method which mimics representative and plastic resemblances and constructs symbolic structural beauty coming from the simple structural principle, that is, material elements.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.351-354
• /
• 2003

Titanium alloys are a vital element for developing advanced structural components, especially in aerospace applications. However, process design for successful forming of titanium alloy is a difficult task, which is to be achieved within a very narrow range of process parameters. Presented in this paper is a finite element - based optimal design technique as applied to ductile fracture minimization process design in backward extrusion of titanium alloys.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.454-459
• /
• 2013

This paper deals with an optimal angle error reduction method of magnetic position sensor using hall effect elements. The angle detection simulation for the magnetic position sensor is performed by 3 dimensional finite element method and Taguchi method, one of the design of experiments. The magnetic position sensor is required to generate ideal sine and cosine waveforms from its hall effect elements according to rotation angle for precise angle information. However, the output signals are easy to include harmonics due to uneven magnetic field distribution from permanent magnet in the air-gap in the vicinity of hall effect elements. For the Taguchi method, three design parameters related to position of hall effect elements and shape of back yoke are selected. The characteristics of optimal magnetic position sensor are compared with those of original one in terms of simulation as well as experiment. Finally, the performances of the motor adopting original model and optimal model are represented for the purpose of verification of motor performance due to signals from magnetic position sensor.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.51-57
• /
• 1999

Recently, long large bridges are built for mass transportation. Movable bearing shoes are important components of the bridges because they support movement of translation and rotation of bridge. In design stage of the long large bridges, detailed analyses using the finite element method are performed to guarantee safety and reliability. For that purpose, three-dimensional modeling is carried out by I-DEAS software and finite element analysis by ANSYS software. Results of the analyses are reviewed and important design factors for movable bearing shoes are discussed.