• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.360-365
• /
• 2005

SMB는 연속 크로마토그래피 공정으로써 회분식 크로마토그래피보다 이동상의 소비를 줄이고 높은 농도, 높은 수율의 생산성의 장점을 가지고 있다. 그러나 운전상의 복잡성 때문에 이 공정을 이해하기 어렵다. 본 실험에서는 서로 다른 색깔을 지닌 두 물질의 분리를 시도함으로써 공정의 이해를 용이하게 하였다. 실험에서 사용된 물질은 Blue dextran과 Orange G로서 각각 파란색과 오렌지 색을 띤다. 실험은 4개의 존으로 구성된 SMB로써 zone VI에서 zone I으로 재순환 되지 않는 열린 루프계가 적용되었다. 운전 조건은 Standing wave design를 이용하였으며 extract와 raffinate에서 높은 순도와 수율을 가질 수 있도록 디자인하였다. 단일 칼럼을 이용한 실험을 통해서 여러 유량에서 비선형 흡착 평형식과 실험식으로부터 물질전달계수를 얻었다. Extract와 raffinate의 농도분포 곡선은 모사 결과와 거의 일치하였다. Extract와 raffinate의 순도는 99.49％와 98.89％이며 두 물질의 수율은 모두 98％였다.

• 한국해양공학회지
• /
• 제32권5호
• /
• pp.402-409
• /
• 2018

This paper describes the plan and procedure of a development test and evaluation that will be performed to verify the performance and technology of multi-mission unmanned surface vehicles (MMUSVs). In order to verify the design requirement of MMUSVs, we designed and manufactured the common platform of MMUSVs, which have an overall length of8.4 m, a displacement of 3,100 kg, and a speed of more than35 kts. The platform is equipped with several sub-systems, including radar and an EOTS/IRS. The EOTS/IRS, along with the search radar, is used for effective detection, identification, and targeting. The core technologies of MMUSV for DT&E will be investigated. The common platform design technologies, remote operating and control system technologies, autonomous navigation technologies, and unmanned operational technology of sensors and equipment will be studied for the development of the MMUSV's core technologies. The system will be able to make precise observations and track targets both manually and automatically during day and night conditions. Currently, the verification tests for each of the technologies and for the integrated system are in the pipeline for DT&E, which will be performed next year. Also, software reliability and life tests will be performed.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.157-164
• /
• 2010

본 연구는 프리스트레스가 도입된 접속슬래브(Single-PTAS: Single Post-Tensioned Approach Slab)의 긴장력 도입에 따른 거동과 환경하중에 대한 거동을 분석하기 위하여 시험시공 현장에서 실험을 통해 수행되었다. 실험을 위해 온도측정센서를 슬래브의 깊이에 따라 장착하였으며, 변위측정게이지를 슬래브의 여러 위치에 설치하여 환경하중 및 긴장력 도입에 따른 슬래브의 변위 변화를 3차원적으로 측정하였다. 실험결과 접속슬래브는 길이가 짧아 긴장력 도입에 의한 급격한 종방향 변위 변화는 관찰되지 않았다. 접속슬래브의 깊이별 일일 온도변화는 깊이가 약 35cm보다 깊을 경우에는 거의 발생하지 않았으며, 수직온도구배는 접속슬래브의 두께가 큰 교대부근에서는 포장과 인접하는 부근에서 보다 작아졌다. 컬링 시 수직변위의 변화 양상 및 크기는 측정 지점의 수직온도구배와 직접적으로 관계가 있었다. Single-PTAS의 거동을 분석한 결과 콘크리트 포장 슬래브와 매우 유사한 거동을 보였으며, 따라서 차륜하중만을 고려하여 단순보로 설계하고 있는 접속슬래브에 포장체의 개념을 도입한 설계방안의 정립이 필요한 것으로 판단되었다.

• 근관절건강학회지
• /
• 제3권1호
• /
• pp.4-22
• /
• 1996

Purposes of this study were to identify a hospital-based home care model and to improve the physical, emotional and economical effectiveness of arthritic patients through medical and nursing team approach. The design in nonequivalent control group pretest-posttest design with matched samples in terms of age, sex and disease severity. Fifty two patients in each group were assigned in Seoul, Kyunggi, Kangwon and Kwangju. Before and after 6-month period of home care, level of pain, duration of morning stiffness, Richie Index, ADL, self efficacy, depression, cost expenditure were measured. Nine patients were excluded from the control group in the period of study because of denial of participation. Contents of home care provided to the experimental group include mainly distribution of prescribed drugs, 'assessment of patients' condition and side-reactions of drug. All of the information related to the home care patient were reported to the physician. On the bases of these data, the physician prescribe the specific drugs to each patient. Each patient visited the physician every 2 or 3 month for laboratory test. Patients assigned to the control group visited the outpatient clinic once a month as usual. Null hypotheses were selected because physicians concerned about the ineffective change of patients' conditions due to indirect communication with patients through nurses. Level of pain, Richie index, ADL, self-efficacy, depression, duration of morning stiffness and direct medical cost were the home care provided to them. If a family member accompany in a home care group can save 10,676 Won/month in Seoul, 34,000 Won/month in other districts. Other in-direct cost for transportation and meal can also be saved. In conclusion, those patients with low level of ADL, high level of pain and Richie index, living in the remote area definitely need the home care.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권1호
• /
• pp.406-425
• /
• 2012

Deploying advanced home networking technologies and modern home-networked devices in residential environments provides a playground for new home applications and services. Because home multimedia entertainment is among the most essential home applications, this paper presents an appealing home media content sharing scenario: home-networked devices can discover neighboring devices and share local media content, as well as enormous amounts of Internet media content in a convenient and networked manner. This ideal scenario differs from traditional usages that merely offer local media content and require tedious manual operations of connection setup and file transfer among various devices. To achieve this goal, this study proposes a proxy gateway architecture for home multimedia content distribution. The proposed architecture integrates several functional mechanisms, including UPnP-based device discovery, home gateway, Internet media provision, and in-home media content delivery. This design addresses several inherent limitations of device heterogeneity and network interoperability on home and public networks, and allows diverse home-networked devices to play media content in an identical and networked manner. Prototypical implementation of the proposed proxy gateway architecture develops a proof-of-concept software, integrating a BitTorrent peer-to-peer client, a UPnP protocol stack, and a UPnP AV media server, as well as media distribution and management components on the OSGi home gateway platform. Practical demonstration shows the proposed design and scenario realization, offering users an unlimited volume of media content for home multimedia entertainment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.109-114
• /
• 2008

This paper presents the development status of a subscale precooled turbojet engine "S-engine" for the hypersonic cruiser and space place. S-engine employs the precooled-cycle using liquid hydrogen as fuel and coolant. It has $23cm{\times}23cm$ of rectangular cross section, 2.6 m of the overall length and about 100 kg of the target weight employing composite materials for a variable-geometry rectangular air-intake and nozzle. The design thrust and specific impulse at sea-level-static(SLS) are 1.2 kN and 2,000 sec respectively. After the system design and component tests, a prototype engine made of metal was manufactured and provided for the system firing test using gaseous hydrogen in March 2007. The core engine performance could be verified in this test. The second firing test using liquid hydrogen was conducted in October 2007. The engine, fuel supplying system and control system for the next flight test were used in this test. We verified the engine start-up sequence, compressor-turbine matching and performance of system and components. A flight test of S-engine is to be conducted by the Balloon-based Operation Vehicle(BOV) at Taiki town in Hokkaido in October 2008. The vehicle is about 5 m in length, 0.55 m in diameter and 500 kg in weight. The vehicle is dropped from an altitude of 40 km by a high-altitude observation balloon. After 40 second free-fall, the vehicle pulls up and S-engine operates for 60 seconds up to Mach 2. High altitude tests of the engine components corresponding to the BOV flight condition are also conducted.

• Advances in aircraft and spacecraft science
• /
• 제4권2호
• /
• pp.145-167
• /
• 2017

The presented paper gives an overview of several projects addressing the experimental characterization and control of the buffet phenomenon on 3D turbulent wings in transonic flow conditions. This aerodynamic instability induces strong wall pressure fluctuations and therefore limits flight domain. Consequently, to enlarge the latter but also to provide more flexibility during the design phase, it is interesting to try to delay the buffet onset. This paper summarizes the main investigations leading to the achievement of open and closed-loop buffet control and its experimental demonstration. Several wind tunnel tests campaigns, performed on a 3D half wing/fuselage body, enabled to characterize the buffet aerodynamic instability and to study the efficiency of innovative fluidic control devices designed and manufactured by ONERA. The analysis of the open-loop databases demonstrated the effects on the usual buffet characteristics, especially on the shock location and the separation areas on the wing suction side. Using these results, a closed-loop control methodology based on a quasi-steady approach was defined and several architectures were tested for various parameters such as the input signal, the objective function, the tuning of the feedback gain. All closed-loop methods were implemented on a dSPACE device able to estimate in real time the fluidic actuators command calculated mainly from the unsteady pressure sensors data. The efficiency of delaying the buffet onset or limiting its effects was demonstrated using the quasi-steady closed-loop approach and tested in both research and industrial wind tunnel environments.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.75-82
• /
• 2019

In a highly urbanized area, land availability is limited for the installation of space consuming stormwater systems for best management practices (BMPs), leading to the consideration of underground stormwater treatment devices connected to the stormwater pipe system. The configuration of a stormwater pipe network determines the hydrological and pollutant transport characteristics of the stormwater discharged through the pipe network, and thus should be an important design consideration for effective management of stormwater quantity and quality. This article presents a multi-objective optimization approach for designing a stormwater pipe network with on-line stormwater treatment devices to achieve an optimal trade-off between the total installation cost and the annual removal efficiency of total suspended solids (TSS). The Non-dominated Sorted Genetic Algorithm-II (NSGA-II) was adapted to solve the multi-objective optimization problem. The study site used to demonstrate the developed approach was a commercial area that has an existing pipe network with eight outfalls into an adjacent stream in Yongin City, South Korea. The stormwater management model (SWMM) was calibrated based on the data obtained from a subcatchment within the study area and was further used to simulate the flow rates and TSS discharge rates through a given pipe network for the entire study area. In the simulation, an underground stormwater treatment device was assumed to be installed at each outfall and sized proportional to the average flow rate at the outfall. The total installation cost for the pipes and underground devices was estimated based on empirical formulas using the flow rates and TSS discharge rates simulated by the SWMM. In the demonstration example, the installation cost could be reduced by up to 9% while the annual TSS removal efficiency could be increased by 4% compared to the original pipe network configuration. The annual TSS removal efficiency was relatively insensitive to the total installation cost in the Pareto-optimal solutions of the pipe network design. The results suggested that the installation cost of the pipes and stormwater treatment devices can be substantially reduced without significantly compromising the pollutant removal efficiency when the pipe network is optimally designed.

• 인터넷정보학회논문지
• /
• 제20권2호
• /
• pp.51-59
• /
• 2019

본 논문은 최근 각광받고 있는 전기차위주의 많은 실증 사업 중 충전 인프라와 연계된 충전운영시스템 및 전기요금간의 관계를 데이터 연계 분석하였다. 현 시점에서 앞으로 일어날 전기차 충전 인프라에 대한 급속한 수요의 증가로 말미암아 수요치를 예측한다는 의미에서 다가오는 시대를 미리 준비 할 수 있다. 동시에 시스템 모델링을 사이트를 중심으로 실증하고 도식화하는 일이 선행되어야 할 요소이다. 기존의 소규모 시뮬레이션에 의한 모델링과 운영시스템의 설계는 데이터 연계분석을 기반으로 하였다. 본 논문에서는 최종적으로 새로운 시스템 모델링을 구현하여 실제 차량과 이용자를 대상으로 각 지점과 노드별로 시간에 따른 시분할 데이터로 분석하고자 표준 형식으로 도입하였다. 실제 구현된 전기차 충전 인프라와 운영시스템을 대상으로 데이터 연계분석 중심의 효율성을 증명하고자 하였다.

• 한국멀티미디어학회논문지
• /
• 제24권1호
• /
• pp.75-94
• /
• 2021

The 4th industrial revolution needs a fusion of artificial intelligence, robotics, the Internet of Things (IoT), edge computing, and other technologies. For the fusion of technologies, cloud computing technology can provide flexible and high-performance computing resources so that cloud computing can be the foundation technology of new emerging services. The emerging services become a global-scale, and require much higher performance, availability, and reliability. Public cloud providers already provide global-scale services. However, their services, costs, performance, and policies are different. Enterprises/ developers to come out with a new inter-operable service are experiencing vendor lock-in problems. Therefore, multi-cloud technology that federatively resolves the limitations of single cloud providers is required. We propose a software platform, denoted as Cloud-Barista. Cloud-Barista is a multi-cloud service common platform for federating multiple clouds. It makes multiple cloud services as a single service. We explain the functional architecture of the proposed platform that consists of several frameworks, and then discuss the main design and implementation issues of each framework. To verify the feasibility of our proposal, we show a demonstration which is to create 18 virtual machines on several cloud providers, combine them as a single resource, and manage it.