• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1086-1091
• /
• 2022

The International Maritime Organization is establishing international agreements on maritime safety and security to prepare for the introduction of autonomous ships. In Korea, the industry is focusing on autonomous navigation system technology development, and to reduce accidents involving coastal ships, research on autonomous ship technology application plans for coastal ships is in progress. Interest in autonomously operated ships is increasing worldwide, and maritime demonstrations for verification of developed technologies are being pursued. In this study, a basic investigation was conducted on the design of a demonstration ship and an onshore platform (remote support center) using digital twin technology for application to coastal ships. To apply digital twin technology, an 8-m small battery-powered electric propulsion ship was selected as the target. The basic design of the twin-integrated platform was developed. The ship navigation and operation data were stored on a server system, and remote-control commands of the electric propulsion ship was achieved through communication between the ship and the onshore platform. Ship performance management, operation and operation optimization, and predictive control are possible using this digital twin technology. This safe and economical digital twin technology is applicable to ships responding to crisis scenarios.

• Journal of Korean Academy of Nursing Administration
• /
• v.16 no.2
• /
• pp.152-161
• /
• 2010

Purpose: The aim of this project was to develop a patient safety-focused inservice education program for surgical nurse and to test the effects of this program. Methods: Methodological designs for instruments development, a pretest-posttest and a posttest design were employed. After the education, nurses' satisfaction, confidence, usefulness and application of 137 nurses were evaluated at 15 surgical units of a tertiary teaching hospital in Seoul, Korea. The education contents are 6 skill areas (infusion pump use, suction, chest tube drainage, oxygen administration, nebulizer use, insulin administration) and medication knowledge. Teaching methods were lecture, instructor demonstration, and 1:1 skill test. Descriptive statistics, Wilcoxon test, Spearman's correlation and Stepwise regression were used. Results: Satisfaction scores for skills and medication education were 4.00-4.21 (out of 5), The more performance frequency in 6 skills, the higher score in confidence as well as in usefulness and application, and the higher satisfaction with the program, the higher score in usefulness, application, confidence, and medication knowledge. Medication knowledge improved after the education (Z=-7,757, p<.001). Significant predictors of skill confidence were application of skills in job performance, medication confidence, and career in present unit. Conclusion: The results of this study suggest that systematic and continuous inservice education will improve patient safety by promoting nursing quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4849-4854
• /
• 2015

It has been often occurred for the outside components(BU, SVaC, DB) of UM71c AF track circuits to be broken down caused by some pieces of falling ice in the winter time or by infrastructure repairing equipments while facility maintenance works since 2004, opening of Kyeongbu High Speed Rail Express. In this paper, we proposed that we could move the outside components of UM71c track circuit out of wayside from present place. Then we can assure that the life time of those components would be extended. So we simulated the electrical characteristics by changing cable length using MATLAB Simulinks and we designed the compensation capacitor. Also, we obtained the same results as those of simulation by field demonstration test on site. The design specifications obtained from this field verification test could be applied in the absent section of track circuit, if only have a little more intensified research to compensate changed electrical characteristics and to redesign inner impedance of the track circuit.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.1
• /
• pp.63-70
• /
• 2017

In this paper, we design and fabricate a de-orbiter using drag-sail and evaluate deployment characteristics. Without employing an actuator to deploy, the de-orbiter is activated by the SMA wire based the release mechanism and driven by the restoring force of the tape-spring. For efficient storage and deployment of drag-sail, an origami method of original ISO flasher is chosen and low priced mylar film is used as the material of the drag-sail. In addition, through the fault tree analysis method which is one of the one-shot device reliability evaluation methods, we confirm the reliability of the de-orbiter(0.997572) and the Roller failure has the highest criticality. Finally, we find feasibility of the proposed de-orbiter through the deployment demonstration of drag-sail.

• Journal of The Korean Association of Information Education
• /
• v.19 no.2
• /
• pp.243-252
• /
• 2015

The software education to elementary students will be conducted from 2019. One of highlights of software education is a programming experience. It requires a higher level of programming education to students that are interested in programming. This problem can be solved by the club activities. But the materials for programming education for elementary students is not much. Therefore, we developed a programming material for club activities of the elementary school. We did not develop it as a programming manual. The students can understand a problem, can design through decomposition and abstraction processes, and can write a program when they are learning with this material. As a result, we expect that they can enhance their computational thinking abilities. We proved that our material is suitable for elementary students through a demonstration class. Therefore, we expect that our development methodologies for the material for programming education will contribute to develop a material for programming education.

• Journal of Korean Academy of Nursing
• /
• v.44 no.4
• /
• pp.428-436
• /
• 2014

Purpose: This study was conducted to identify the effects of newborn care education for fathers on their knowledge and confidence in newborn care at postpartum one month. Methods: A nonequivalent control group pretest posttest design was used. The participants were 53 first-time fathers of newborns, 27 in experimental group, and 26 in control group. They were recruited at the nursery of one municipal hospital in Seoul. For the experimental group, a 50-minute education on newborn care using video, verbal education, demonstration and practice were provided prior to discharge. Fathers' knowledge and confidence in newborn care and their satisfaction with the education program were measured at postpartum one month. Results: The fathers in the experimental group showed significantly higher knowledge (t= -4.51, p<.001), and confidence in newborn care (t= -2.29, p=.026) compared to the control group at postpartum one month. Fathers in the experimental group had a satisfaction score of $27.37{\pm}2.73$ immediately after the education, and $25.30{\pm}3.40$ at postpartum one month. Conclusion: Results indicate that newborn care education for first-time fathers is an effective method in enhancing the level of knowledge and confidence in newborn care. It can be used in the nursery department before discharge as a useful nursing intervention.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.2
• /
• pp.159-168
• /
• 2020

Current residential electricity rates, which are charged regardless of consumption patterns, have a problem of restricting consumer choice. In order to improve the problem, the Korea government started a demonstration project based on Time-Of-Use(TOU) pricing from September 2019. However, the analysis of its effect is still limited. This study analyzed the changes and limitations of TOU pricing compared to the current progressive pricing. The result showed that the high rate payer's bill decreased by up to 33.8 % while the low rate payer's bill increased by up to 117.7 %. This can lead to the problem of accepting electricity rates from a social point of view. In this study, TOU pricing based on progressive pricing was proposed to overcome the problem. The results presented the rate changes depending on the power consumption patterns while decreasing the average rate change from 32 % to -1.9 %. It means that the proposed pricing can support the TOU effect while maintaining the framework of the existing progressive pricing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1613-1620
• /
• 2011

CSD is IEEE Stan없rd 802.15.4b based Container Security Device which is proposed by the U.S Department of Home Security. It is mounted inside the container to sense opening of the container door. ConTracer is the CSD which is developed in this research whose major features are sensing door opening status as well as history inquiring on internal environment and shock to the container by mounting the temperature/humidity/shock sensors. Moreover, its RFID frequency bandwidth uses 2.4GHz 10 correspond actively to the radio regulations used by different countries. This. paper introduces the development trend of CSD, compares the ConTracer which is developed thru this research and other company's CSD, and introduces CSD System which is designed and established using ConTracer. Finally, the implemented CSD System is verified by applying the demonstration service to container distribution between Korea and Japan.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.719-725
• /
• 2014

In the present study, a numerical analysis of an injection molding process was conducted for predicting the mold deformation considering non-Newtonian flow, heat transfer, and structural behavior. The accurate prediction of mold deformation during the filling stage is important to successfully design and manufacture a precision injection mold. While the local mold deformation can be caused by various factors, a pressure induced by the polymer melt is considered to be one of the most significant ones. In this regard, the numerical simulation considering both the melt filling and the mold deformation was carried out. A mold core for a 2D axisymmetric center-gated disk was used for the demonstration of the present study. The flow behavior inside the mold cavity and temperature distribution were analyzed along with the core displacement. Also, a Taguchi method was employed to investigate the influence of the relevant parameters including flow velocity, mold core temperature, and melt temperature.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.536-542
• /
• 2011

Dissimilar metal welds in nuclear power plant are known as very susceptible to PWSCC flaws, and periodically inspected by the qualified inspector and qualified procedure during in-service inspection period. According to field survey data, the majority of their DMWs are located on tapered nozzle or adjacent to a tapered component. These types of configurations restrict examination access and also limit examination volume coverage. Additionally, circumferential scan for axially oriented flaw is very difficult to detect located on tapered surface because the transducer can't receive flaw response from reflector for miss-orientation. To overcome this miss-orientation, it is necessary adapt skewed ultrasonic transducer accomodate tapered surface. The skewed refracted longitudinal ultrasonic transducer designed by modeling and manufactured from the modelling result for axial flaw detection. Experimental results showed that the skewed refracted longitudinal ultrasonic transducer get higher flaw response than non-skewed refracted longitudinal ultrasonic transducer.