• 한국과학교육학회지
• /
• 제29권7호
• /
• pp.751-758
• /
• 2009

The purpose of this study was to investigate brain activation pattern and functional connectivity network during classification on the biological phenomena. Twenty six right-handed healthy science teachers volunteered to be in the present study. To investigate participants' brain activities during the tasks, 3.0T fMRI system with the block experimental-design was used to measure BOLD signals of their brain. According to the analyzed data, superior, middle and inferior frontal gyrus, superior and inferior parietal lobule, fusiform gyrus, lingual gyrus, and bilateral cerebellum were significantly activated during participants' carrying-out classification. The network model was consisting of six nodes (ROIs) and its fourteen connections. These results suggested the notion that the activation and connections of these regions mean that classification is consist of two sub-network systems (top-down and bottom-up related) and it functioning reciprocally. These results enable the examination of the scientific classification process from the cognitive neuroscience perspective, and may be used as basic materials for developing a teaching-learning program for scientific classification such as brain-based science education curriculum in the science classrooms.

• 한국안전학회지
• /
• 제22권1호
• /
• pp.7-12
• /
• 2007

There are two kinds of design process for sprinkler system. one is pipe schedule system and the other is hydraulically designed system. We have inefficient results when we design by hydraulically designed system because the design process for sprinkler system is restricted by domestic fire code. Therefore, it is essential to do an introduction of hydraulically designed system which is based on engineering for enhancing reliability and efficiency of sprinkler system. This study presents points at issue by comparing and studying design standards of sprinkler system from Korea, Japan and NFPA, and presents improvement plans of national fire safety code of sprinkler system by processing, comparing and analyzing designs according to piping schedule and hydraulically designed system about domestic objects. Installation standards of sprinkler system have to be applied not by object buildings but by hazard classification. It is hard to design an efficient sprinkler system for fire control when water supply requirement of sprinkler systems allocated according to a size of a building because the same purpose but other buildings may request more water requirement or less. We should sublate the pipe schedule system from national fire safety code and need to introduce the hydraulically designed system. The pipe schedule system presents easy access because it is based on the forecasted engineering calculations but it is applied to only small buildings like NFPA due to its low reliability.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.53-60
• /
• 1997

일반적으로 선박 판부재의 좌굴강도에 대한 안전성 평가는 선체구조 설계단계에서 반드시 거쳐야 할 단계로 한 척의 배는 수많은 판부재로 구성되어 선박구조 전체에 대한 이론적이며 체계적인 시스템을 이용한 좌골강도평가의 정확도 및 효율성이 강조되고 있다. 그러나 현재의 판부재 좌굴강도를 평가하는 각 선급의 규정치가 많은 영향인자를 고려치 않고 있거나 함축척으로 고려하고 있기 때문에 경우에 따라서는 좌굴강도가 상당한 안전측의 값을 제시하는 등 실제 선급규정치의 사용에 제약을 주기도 한다. 따라서 본 연구에서는 면내인장력의 영향등 선급들의 좌굴 규정치뿐만이 아니라 면내인장력의 효과, 경계조건, 횡하중 및 잔류응력등을 고려하면서 손쉽게 좌굴평가를 수행할 수 있는 선진 좌굴평가시스템을 개발하였다. 이들 선진 좌굴평가시스템을 이용하면 선박판부재의 보다 정도 높고 효율적인 평가가 가능하리라 생각되며 앞으로 대중적인 사용을 위해 워크스테이션 외에도 개인용 컴퓨터에서의 시스템 구축을 계획하고 있다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1318-1323
• /
• 2009

In recent years, dramatic advances in information technology have motivated the construction industry to improve its productivity. Computer-based information technology includes Computer-Aided Design (CAD), Computer-Aided Engineering (CAE), Computer-Aided Manufacturing (CAM), Enterprise Resource Planning (ERP), Digital Mock-Up (DMU) and Product Data Management (PDM). Most construction industries are trying to apply these technologies for quality improvement, reduction of construction time and cost. PDM is very useful for managing data and process related to product design and manufacturing. PDM system has various functions such as drawing and engineering document management, product structure and structure modification management, part classification management, workflow management, and project management. In this paper, PDM system was applied to the design of steel-concrete composite girder bridge. To make a practical guidance for PDM implementation to bridge design, the procedure for its implementation was presented. Consequently, this paper could be useful to enhance the efficiency of bridge design.

• 대한산업공학회지
• /
• 제19권2호
• /
• pp.83-93
• /
• 1993

Conventional computer programs developed and used by practicing engineers can be considered to contain expert knowledge and design experience. If these conventional programs are converted into expert systems, the difficult and time consuming process of knowledge acquisition can be simplified. Also the constructed knowledge-base can have higher confidence level than that constructed by the usual knowledge acquisition method of interviews. An existing computer program which is being used by ship structural designers has been reformulated as a design expert system by applying an expert system development shell-Nexpert. Utilizing the callable interface provided by the development shell, external design tools have also been integrated. The interfaced external functions are a graphical user interface (GUI) for the design process control, and graphics functions for the visualization of design results. It is observed that the developed system for design support is useful in two aspects. The trace-back function shows what portion of design rules are applied in arriving at certain design decisions. Also the knowledge-base can be conveniently updated as design rules of the classification societies are updated.

• 대한조선학회논문집
• /
• 제44권6호
• /
• pp.612-618
• /
• 2007

There are a lot of openings, holes and slots in ship structural members. It is not easy to solve the troubles around the openings adequately at the detail design stage, because there are a lot of concerning locations. There are not also clear design rules of classification societies and it is not possible to apply direct calculation for all the concerning members. Therefore, it is necessary to set up simplified approach such as a standard or guidance in order to decide the opening design quickly. For this study, guidance and regulations of each classification and several companies were surveyed. Grillage analysis and the refined mesh method were used to evaluate the strength around hole considering boundary condition and more detailed member arrangement. As a result, the standard for opening design was established and verified.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.417-422
• /
• 1998

This paper presents a method of object classification from dynamic image based on fuzzy inference algorithm which is suitable for low speed such as, conveyor, uninhabited transportation. At first, by using feature parameters of moving object, fuzzy if - then rule that can be able to adapt the wide variety of surroundings is developed. Secondly, implication function for fuzzy inference are compared with respect the proposed algorithm. Simulation results are presented to testify the performance and applicability of the proposed system.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2004년도 e-Biz World Conference
• /
• pp.302-309
• /
• 2004

·Catalogs -information about products and services -Contents ＋ Classification Schema ＋ Operational Issues ·What do we do with them？ -[Schulten, et a;, 2001] ‥Narrow down search for complete set of applicable products ‥Comprehend individual description to the precision needed -Support other applications that use product information ‥SCM, ERP, e-Procurement, etc. ·Catalog Management System -Design, storage, navigation ＆ retrieval, transformation, communication, publication(omitted)

• 한국문헌정보학회지
• /
• 제18권
• /
• pp.129-155
• /
• 1990

This study suggests two hypotheses and verifies them. First hypothesis is that discriminant analysis which is a statistical technique can be used to classify documents on the subject of organic chemistry by nine subareas. Second hypothesis is that discriminant analysis is superior to cluster analysis in classifing objects by fixed categories.

• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.155-161
• /
• 1991

Flexibility has become a key objectives in the design of manufacturing systems and a critical measure of total manufacturing performance. The need for flexibility is increasing due to some environmental change such as changing technical characteristics of the products and the changing nature of market demands. Most importantly, flexibility embodies competitive value for a manufacturer. Although the importance of flexibility has stressed in the various research, very few attempts have been made to synthesize the literature dealing with definitions and measure of flexibility. It is this issue that have motivated us to search for the definition and classification of flexibility.