• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1998년도 The Korea Society for Simulation 98 춘계학술대회 논문집
• /
• pp.50-55
• /
• 1998

In this paper we use discrete simulation method to get the criteria of system evaluation required in the case of designing the complicated probabilistic event system having discrete probabilistic variables and to search the effective and reliable alternatives to satisfy the objective value of the given system through on-line, single run within the short time period. If we find the alternative we construct the algorithm which change values of decision variables and determining alternative by using the stopping algorithm which end the simulation in the steady state of system. In order to prevent the loss of data when we analyze the acquired design alternative in the steady state we provide the background of the estimation of the autoregressive model and mean and confidence interval for evaluating correctly the objective function obtained by the small amount of output data through the short time period simulation.

• Geomechanics and Engineering
• /
• 제29권6호
• /
• pp.599-614
• /
• 2022

In this study, the reliability analysis of internal and external stabilities of Reinforced Soil Walls (RSWs) under static and seismic loads are investigated so that it can help the geotechnical engineers to perform the design more realistically. The effect of various variables such as angle of internal soil friction, soil specific gravity, tensile strength of the reinforcements, base friction, surcharge load and finally horizontal earthquake acceleration are examined assuming the variables uncertainties. Also, the correlation coefficient impact between variables, sensitivity analysis, mean change, coefficient of variation and type of probability distribution function were evaluated. In this research, external stability (sliding, overturning and bearing capacity) and internal stability (tensile rupture and pull out) in both static and seismic conditions were investigated. Results of this study indicated sliding as the predominant failure mode in the external stability and reinforcing rupture in the internal stability. First-Order Reliability Method (FORM) are applied to estimate the reliability index (or failure probability) and results are validated using the Monte Carlo Simulation (MCS) method. The results showed among all variables, the internal friction angle and horizontal earthquake acceleration have dominant impact on the both reinforced soil wall internal and external stabilities limit states. Also, the type of probability distribution function affects the reliability index significantly and coefficient of variation of internal friction angle has the greatest influence in the static and seismic limits states compared to the other variables.

• 대한간호학회지
• /
• 제34권4호
• /
• pp.646-654
• /
• 2004

Purpose. The purpose of this study was to test the effectiveness of a comprehensive smoking cessation program for Korean adolescents. Method. The study design was quasi-experimental with one pre and three post-tests. The three posttests were done immediately after, three months later, and six months after the completion of the program. A total of 43 high school students who smoked participated in the study with 22 in the experimental group and 21 in the control group. The smoking cessation program consisted of 9 sessions with content on enhancement of self-efficacy, stress management, correction of distorted thoughts, consciousness raising, and assertiveness training. The study variables were urine cotinine levels, self-efficacy, stress, and stages of changed behavior. Results. Urine cotinine levels significantly decreased in the experimental group after the program (F=3.02, p=.06) but significantly increased in the control group (F=6.32, p=.004). Self-efficacy and the degree of stress did not change in either group. The stages of smoking cessation behavior tended to change when compared with raw data for the experimental group. For most participants, the stages of change had been precontemplation and contemplation, but changed to action and maintenance stage among the experimental group. Conclusion. The program was effective in smoking cessation and influencing stages of change but did not change psychosocial factors such as self-efficacy and stress. It is suggested a program should be developed to change psychosocial variables on a long-term basis. It is also desirable to involve peers and families of adolescents who smoke when planning programs to enhance social support.

• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.459-468
• /
• 2008

A web-based Computer-Aided Engineering (CAE) supporting system is connected with a Product Data Management (PDM) system for Small and Medium Enterprises (SMEs) suffering from the lack of building hardware, software and related experts. An analysis of current business models and worksite requirements provides an improved process model and data to be shared between the PDM system and the CAE supporting system. Since all engineering tasks such as geometric modeling, mesh generation, static stress and modal analysis, and fatigue durability analysis are automated in the CAE supporting system, the user in charge of the CAE have only to configure the concerned values of design variables and result data through the web page. The existing Change Management module of the PDM system is modified for seamless data exchange, i.e. sending the Engineering Change Order (ECO) data to the CAE supporting system and receiving the CAE result data bark. The hi-directional data transfers between the PDM system and the CAE supporting system is made possible by adaptors bused on the Simple Object Access Protocol (SOAP). The current approach will be very helpful for SMEs that only have the PDM system and have no adequate infrastructure for CAE.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1154-1164
• /
• 2002

Losses on the turbine consist of the mechanical loss, tip clearance loss, secondary flow loss and blade profile loss etc.,. More than 60 % of total losses on the turbine is generated by the two latter loss mechanisms. These losses are directly related with the reduction of turbine efficiency. In order to provide a new design methodology for reducing losses and increasing turbine efficiency, a two-dimensional axial-type turbine blade shape is modified by the optimization process with two-dimensional compressible flow analysis codes, which are validated by the experimental results on the VKI turbine blade. A turbine blade profile is selected at the mean radius of turbine rotor using on a heavy duty gas turbine, and optimized at the operating condition. Shape parameters, which are employed to change the blade shape, are applied as design variables in the optimization process. Aerodynamic, mechanical and geometric constraints are imposed to ensure that the optimized profile meets all engineering restrict conditions. The objective function is the pitchwise area averaged total pressure at the 30% axial chord downstream from the trailing edge. 13 design variables are chosen for blade shape modification. A 10.8 % reduction of total pressure loss on the turbine rotor is achieved by this process, which is same as a more than 1% total-to-total efficiency increase. The computed results are compared with those using 11 design variables, and show that optimized results depend heavily on the accuracy of blade design.

• 한국전산구조공학회논문집
• /
• 제21권5호
• /
• pp.413-419
• /
• 2008

확정론적 최적설계에서는 설계변수의 변동이나 불확실성 등을 최적화 과정에서 고려하지 않는다. 신뢰성 최적설계는 설계변수의 임의성을 체계적인 확률 및 통계이론을 적용하여 생산품의 안정성을 보다 정밀하고 합리적으로 다룬다. 본 논문에서 설계변수를 확률변수로 취급하여 실제 제작시의 제작오차를 고려한 표준편차를 주었으며, 설계변수의 평균에 대한 표준편차를 기존의 고정된 값을 사용하지 앉고 평균과 표준편차의 관계가 오목함수로 나타나도록 하였다 즉, 설계변수의 평균이 달라짐에 따라 표준편차도 변동계수만큼 변하도록 하였다. 신뢰성해석은 불변 2차 모멘트 방법을 이용하고 신뢰성을 구하는 방법은 신뢰도 지수 접근방법의 개선된 일계 2차 모멘트 방법을 이용하여 신뢰성을 구하였다. 두 가지 예제를 통해 확정론적 최적설계, 신뢰성 최적설계와 표준편차의 변동을 고려한 신뢰성 최적설계의 값을 비교하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.826-827
• /
• 2006

Copper infiltration is demonstrated as a viable solution to achieve higher mechanical properties by filling the interconnected porosities of a ferrous structure with copper infiltrant. This paper will present the results of a design of experiments study based on the selected processing variables in the copper infiltration process. The variables are the following: Infiltrating temperatures, infiltrating time at pre-heat zone and hot zone, the green density of iron part, the migration of copper into the iron part at different processing conditions. The results show the flexibility of the infiltration process to attain certain mechanical properties by changing the processing conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.253-255
• /
• 1999

In this paper, a shape optimization algorithm of superconducting magnet using finite element method is presented. Since the superconductor loses its superconductivity over the critical magnetic field and critical current density, this material property should be taken into account in the design process. Trial and error approach of repeating the change of the design variables costs much time and it sometimes does not guarantee an optimal design. This paper presents a systematic and efficient design algorithm for the superconducting magnet. We employ the sensitivity analysis based on finite element formulation. As for optimization algorithm, the inequality constraint for the superconducting state is removed by modifying the objective function and the nonlinear equality constraint of constant volume is satisfied by the gradient projection method. This design algorithm is applied to an optimal design problem of a solenoid air-cored superconducting magnet that has a design objective of the maximum energy storage.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.46-51
• /
• 2020

The purpose of this study was to analyze the change in tensile strength characteristics of the weld when the welding speed and rotational speed of the tool, which are representative variables of the friction stir welding process. The equipment used in the experiment was Machining Center No. 5. The material used in the experiment is an AA6061-T6 alloy, and a rolled plate with a thickness of 2mm was used. Two experimental variables were selected, the welding speed of the tool and the rotational speed of the tool. The experimental conditions were selected in the range in which a healthy weld could be obtained through a preliminary experiment. The welding speed of the tool was increased to 100mm/min, 200mm/min, and 300mm/min, and the rotational speed of the tool was increased to 1000rpm, 2000rpm, and 3000rpm. As a result of the experiment, the tensile strength increased as the rotational speed of the tool changed at each tool welding speed. In addition, as the welding speed of the tool increased, the tensile strength of the weld was increased. The condition with the highest tensile strength of the weld was found to be a tool feed speed of 300 mm/min and a tool rotation speed of 3000rpm.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권4호
• /
• pp.7-15
• /
• 2018

Purpose: The life span of a hospital building is short. This is because the building will have to be built up due to the fact that it can not cope with the new medical environment, it can not be replaced due to low floor height, lack of land. The purpose of the hospital building master plan is to find a way to fulfill its role in the long term. Methods: Comparison the proposals submitted by the master plan and the proposals submitted by the hospitals, the case of three hospitals that have established a master plan for the past three years. In addition, interviews with the designers who participated in the design competition and the administrator of hospital about the variables that occurred during the business process. Results: The result of this study can be summarized into four points. The first one is that master plan is changed by administrator of hospital so that Thy need to understand about the role of master plan. And next is to protect reduction of the project cost. Third, continuous participation of master plan researchers in following projects is good to communicate with administrator and designer. The last one is empathy of master plan by designer and users. Implications: It is necessary to reduce changing of master plan in design process for sustainable managing of hospital.