• 대한산업공학회지
• /
• 제39권5호
• /
• pp.325-341
• /
• 2013

During the past several decades, the Taguchi robust design method has been widely used in various fields successfully. On the other hand, some researchers and practitioners have criticized the method with respect to the way of utilizing orthogonal arrays, the signal-to-noise ratio as a performance measure, data analysis methods, etc., and proposed alternative approaches to robust design. This paper introduces the Taguchi method first, evaluates the validity of the criticisms, and discusses advantages and disadvantages of each alternative. Finally, research issues to be addressed for effective robust design are presented.

• 한국실내디자인학회논문집
• /
• 제15권4호
• /
• pp.156-164
• /
• 2006

One of frequent phenomena in the contemporary cultural field is the alternative or accompanying interweaving phenomena which happens in the relative connection of A, B, and C. The power of interweaving mixture is one of energies which unify the contemporary cultural phenomena, and it appears as a major phenomena in the recent popular digital architecture. In this study, the mixture, shape, and contents in the contemporary space design is analyzed as a point of view of Post-Structuralism. Namely, the digital part and non-digital part of alternative and circulating existence in the space are classified and the interweaving phenomena in the contemporary space design are proved. It is studied for digital part and physical space to conjunct the hole space and smooth space of Deleuze as part of interweaving phenomena. It is clear that the compatible concept of the hole space and smooth space is crossed complexly or is coexisting in circulating and extending, and is showed as interweaving phenomena in one space.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.207-209
• /
• 2011

Numerous reports show that alternative project delivery systems (PDSs) such as design-build (DB), construction management at risk (CMR), and design-build-maintain (DBM) are increasingly used in many countries. This study compared characteristics of each PDS (design-bid-build (DBB), DB, CMR, or DBM) by analyzing quantitative data from 9 research articles. In order to compare characteristics between DBB and alternative PDSs, the study is based on principal 3 factors - Time, Cost, and Quality. DB shows the best performance in the time part and also the cost performance depending on facility type and project size. The performance of quality has minor difference among different PDSs. These results support the fact that using an appropriate PDS by the characteristic of a project makes high value of efficiency and productivity.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.1011-1014
• /
• 2007

건설시설물의 기능향상과 경제성을 제고하기 위하여 도입된 설계VE제도는 2005년 12월부터 100억 이상 건설공사에 확대 적용되고 있다. 그러나 VE가 형식적이고 결과 중심적으로 실시되고 있어 VE를 통한 가치창출의 극대화라는 VE본연의 목적을 달성하지 못하고 있는 실정이다. 본 연구에서는 그동안 국내에서 실시된 턴키 및 대안입찰사업의 설계VE 사례를 통하여 설계VE의 성과를 분석하고 개선방안을 제시하고자 한다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1998년도 The Korea Society for Simulation 98 춘계학술대회 논문집
• /
• pp.50-55
• /
• 1998

In this paper we use discrete simulation method to get the criteria of system evaluation required in the case of designing the complicated probabilistic event system having discrete probabilistic variables and to search the effective and reliable alternatives to satisfy the objective value of the given system through on-line, single run within the short time period. If we find the alternative we construct the algorithm which change values of decision variables and determining alternative by using the stopping algorithm which end the simulation in the steady state of system. In order to prevent the loss of data when we analyze the acquired design alternative in the steady state we provide the background of the estimation of the autoregressive model and mean and confidence interval for evaluating correctly the objective function obtained by the small amount of output data through the short time period simulation.

• 대한산업공학회지
• /
• 제24권4호
• /
• pp.559-569
• /
• 1998

Cellular manufacturing system (CMS) has been recognized as an alternative to improve manufacturing productivity in conventional batch-type manufacturing systems through reducing set-up times, work-in-process inventories and throughput times by means of group technology. Most of the studies on the design of CMS assumed that each part has a unique process plan, and that its demand is known as a deterministic value despite of the probabilistic nature of the real world problems. This study suggests an approach for designing CMS, considering both alternative process plans and uncertain demand. A mathematical model is presented to show how to minimize the expected amortized and operating costs satisfying these two relaxations. Four heuristic algorithms are developed based on tabu search which is well suited for getting an optimal or near-optimal solution. Example problems are carried out to illustrate the heuristic algorithms and each of them is compared with the deterministic counterpart.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2002년도 가을학술발표대회 디자인학 연구
• /
• pp.72-73
• /
• 2002

• Steel and Composite Structures
• /
• 제42권5호
• /
• pp.633-647
• /
• 2022

This paper presents the results from reliability analyses of the current Eurocode 4 (EN 1994-1-1) and AISC 360-16 design models for predicting the resistance of headed stud shear connectors within profiled steel sheeting, when the ribs are oriented transverse to the supporting beam. For comparison purposes, the performance of the alternative "Luxembourg" and "Stuttgart" model were also considered. From an initial database of 611 push-out tests, 269 cases were included in the study, which ensured that the results were valid over a wide range of geometrical and material properties. It was found that the current EN 1994-1-1 design rules deliver a corrected partial safety factor γ_M^* of around 2.0, which is significantly higher than the target value 1.25. Moreover, 179 tests fell within the domain of the concrete-related failure design equation. Notwithstanding this, the EN 1994-1-1 equations provide satisfactory results for re-entrant profiled sheeting. The AISC 360-16 design equation for steel failure covers 263 of the tests in the database and delivers 𝛾_M^*≈2.0. Conversely, whilst the alternative "Stuttgart" model provides an improvement over the current codes, only a corrected partial safety factor of 𝛾_M^*=1.47 is achieved. Finally, the alternative "Luxembourg" design model was found to deliver the required target value, with a corrected partial safety factor 𝛾_M^* between 1.21 and 1.28. Given the fact that the Luxembourg design model is the only model that achieved the target values required by EN 1990, it is recommended as a potential candidate for inclusion within the second generation of Eurocodes.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.497-507
• /
• 2024

In squat reinforced concrete walls, the displacement capacity for lateral deformation is low and the ability to resist the axial load can quickly be lost, generating collapse. This work consists of testing two squat reinforced concrete walls. One of the specimens is built with conventional detailing of reinforced concrete walls, while the second specimen is built applying an alternative design, including stirrups along the diagonal of the wall to improve its ductility. This solution differs from the detailing of beams or coupling elements that suggest building elements equivalent to columns located diagonally in the element. The dimensions of both specimens correspond to a wall with a low aspect ratio (1:1), where the height and length of the specimen are 1.4 m, with a thickness of 120 mm. The alternative wall included stirrups placed diagonally covering approximately 25% of the diagonal strut of the wall with alternative detailing. The walls were tested under a constant axial load of 0.1f'cAg and a cyclic lateral displacement was applied in the upper part of the wall. The results indicate that the lateral strength is almost identical between both specimens. On the other hand, the lateral displacement capacity increased by 25% with the alternative detailing, but it was also able to maintain the 3 complete hysteretic cycles up to a drift of 2.5%, reaching longitudinal reinforcement fracture, while the base specimen only reached the first cycle of 2% with rapid degradation due to failure of the diagonal compression strut. The alternative design also allows 46% more energy dissipation than the conventional design. A model was used to capture the global response, correctly representing the observed behavior. A parametric study with the model, varying the reinforcement amount and aspect ratio, was performed, indicating that the effectiveness of the alternative detailing can double de drift capacity for the case with a low aspect ratio (1.1) and a large longitudinal steel amount (1% in the web, 5% in the boundary), which decreases with lower amounts of longitudinal reinforcement and with the increment of aspect ratio, indicating that the alternative detailing approach is reasonable for walls with an aspect ratio up to 2, especially if the amount of longitudinal reinforcement is high.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.771-780
• /
• 2013

과거에 시행한 심사제도는 입찰참가자격사전심사 및 기본설계평가와 가격평가로 구분하여 최종 낙찰자를 선정하였으나, 2010년 1월 1일부터 현재까지 턴키 대안입찰공사는 설계 적합 최적가 방식, 종합 평가 방식(입찰가격조정, 설계점수조정, 가중치기준), 확정금액 최상 설계 방식의 낙찰자 결정방식을 선택하고 있다. 이러한 제도적인 문제로 발주기관은 동일 유사한 공사에 대해 서로 다른 낙찰자 결정방식을 적용하고 있는 사례가 종종 있어 왔다. 그러므로 이 연구는 국내에서 시행된 토목부분 턴키 대안입찰공사 발주현황, 건수 및 수주실적, 공종별 발주기관별 수주실적, 세부방식 가중치 낙찰자 수주실적 등의 분석을 통해 국내 턴키 대안입찰공사 실정에 적합한 낙찰자 선정기준을 제시하였다.