• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.158-159
• /
• 2016

Construction project consists of several stages such as planning, design, construction, operation/maintain, etc. Decisions made in the planning and design stage have a significant impact on the construction and operation/maintain stages. Identifying key resources contributing to duration and cost of design alternatives is an important measure to achieve effective coordination between design and construction. This study proposes a method which finds an optimal design alternative by taking into account of resource planning, expected duration, and cost in construction stage. Base on literature review relative to the assessment of design alternatives, a method which predicts required resources, duration, and cost of the design alternative is established. Then, a method that identifies an optimal design alternative based on the preference of a certain project criteria is developed. Finally, a case study is presented.

• Communications for Statistical Applications and Methods
• /
• v.4 no.3
• /
• pp.707-714
• /
• 1997

The littice designs have prove efficient but they are not alwasy available. This article proposes an alternative, an almost lattice design, of the triple lattice design (v=36, k=6, r=4) which is not available. Here, we compare the almost lattice design to the .alpha.-design (v=36, k=6, r=4) which is another alternative of the triple lattice design (v=36, k=6, r=4). Consequently, we show the almost lattice design is a more efficient alternative than the $\alpha$-design through A-, D-, and E-optimality.

• Journal of Industrial Convergence
• /
• v.20 no.10
• /
• pp.219-224
• /
• 2022

This study is to propose a alternative gem that is expressed in various ways instead of jewelry with limited output. It was investigated what materials were used in the alternative gem used in the jewelry design thesis over the past five years. In addition, as a result of a survey to understand the needs of customers, it was found that customers also use resin among resins as an alternative gem, like as research trends. Based on this, the scope of resin use as a alternative gem was expanded and applied to jewelry design rather than the existing method of using resin. As a result, it was found out a various uses of resin as an alternative gem. However, the demand and traditionality that correspond to the conditions of jewelry remain challenges to be established through various jewelry design studies in the future. Therefore, in order to utilize the popular preference of alternative gem, continuous research on applying jewelry design to alternative gem should be continued.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2021

In this paper we proposed the alternative analysis of reliability design using redundancy technique. First, we presented the process for establishing the reliability design alternative analysis process considering the active redundancy and the standby redundancy. and then, the case analysis of A driving equipment was performed in accordance with the reliability design alternative analysis process presented. In case the series reliability design result is not met with the reliability target value. so, the target item for redundancy design of A driving equipment were selected as items with a severity of two or higher. The redundancy design applied with active and standby redundancy techniques were analyzed using BlockSim software. As a result, it was analyzed that reliability design to active redundancy with one of two elements required for A driving equipment is the most efficient compared to the target value of reliability. The results of this study can be usefully used before the reliability design is performed.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.72-80
• /
• 1998

In this study, a design approach based on genetic algorithm is proposed to solve the manufacturing cell design problem considering alternative process plans and alternative machines. The problem is formulated as a 0-1 integer programming model which considers several manufacturing parameters, such as demand and processing time of part, machine capacity, manufacturing cell size, and the number of machines in a machine cell. A genetic algorithm is used to determine process plan for each part, part family and machine cell simultaneously.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2005.05a
• /
• pp.24-25
• /
• 2005

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.207-208
• /
• 2023

The procedure of predicting the construction cost and selecting the best alternative is performed based on comparative review of each building case. In the case of office building, it is required continuously until design is complete, since the owner requirements are various and likely to change during the design process compared to a standardized apartment. However, since the comparison work for each alternative in practice uses only the unit construction cost, there is no correlation between the alternative and the final result, and it is difficult to quantitatively determine the effect of the determined design factor on the total construction cost. It is needed that a means to support the generation of design alternatives using similar building cases during the design phase. This paper proposes a BIM-based data replacing process to support creating and comparison of design alternatives of internal finishing for office building. When design alternatives are created through the proposed process, it is possible to compare several similar cases with current project under equivalent design circumstance. Because only some finishing properties are replaced while maintaining the shape information such as the length, height, and base constraint of the object to be replaced.

• Korean Institute of Interior Design Journal
• /
• v.24 no.4
• /
• pp.111-123
• /
• 2015

This study aims to suggest 'an eco-friendly residential housing design guideline as an elderly housing alternative' by mixing the concept of a 'senior citizen community' housing environment with the concept of an 'eco-friendly' housing environment, based on the directivity of an elderly housing alternative for surviving in a super-aged society and the directivity of a sustainable housing environment for providing against global warming. Basically, this study considered the directivity of 'an eco-friendly residential building as an elderly housing alternative' by analyzing housing environment elements and elements to be considered in an elderly housing environment and setting the directivity of an elderly housing environment, which reflects the change in the design paradigm. In relation to the concept of universal design, for considering the perspective of elderly users, existing elements were compared and major planning elements were applied to the scope of complex planning, communal space and housing unit space. In relation to the concept of eco-friendly design, also, a guideline was re-organized and planning elements were applied to each category by comparing domestic and foreign green building certification systems. Based on domestic and foreign authorized guidelines of universal design and green building certification systems, this study was focused on suggesting an eco-friendly residential housing design guideline as an elderly housing alternative to make users perceive the need for a specific indoor environment design guideline and system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.1
• /
• pp.13-24
• /
• 2023

In this study, alternative seismic force-resisting systems for plant structure supporting equipment were designed, and the seismic performance thereof was compared using nonlinear dynamic analysis. One alternative seismic force-resisting system was designed per the requirement for ordinary moment-resisting and concentrically braced frames but with a reduced base shear. The other seismic force-resisting system was designed by accommodating seismic details of intermediate and unique moment-resisting frames and special concentrically braced frames. Different plastic hinge models were applied to ordinary and ductile systems based on the validation using existing test results. The control model obtained by code-based flexible design and/or reduction of base shear did not satisfy the seismic performance objectives, but the alternative structural system did by strengthened panel zones and a reduced effective buckling length. The seismic force to equipment calculated from the nonlinear dynamic analysis was significantly lower than the equivalent static force of KDS 41 17 00. The comparison of design alternatives showed that the seismic performance required for a plant structure could be secured economically by using performance-based design and alternative seismic-force resisting systems adopting minimally modified seismic details.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.1
• /
• pp.53-61
• /
• 2008

In this research, the layout and geometry of U-type ribs in the part, including significant process conditions, are automatically optimized to reduce part warpage with robustness in consideration. The optimization procedure are based on an iterative redesign methodology integrated with computer aided injection molding simulation, Taguchi's Design of Experiment(DOE), and a direct search-based optimization method. The robustness of a design alternative is efficiently measured by introducing composite noise factor and Taguchi's signal-to-noise ratio. As a solution search methodology, the modified design space reduction method based on orthogonal arrays is employed to exploit an optimal robust design alternative. To illustrate the proposed methodology, a case study is performed on simulation results, where an optimal robust design alternative is obtained with a moderate number of iterations.