• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.2
• /
• pp.267-278
• /
• 2019

Variety of tunnel ahead prediction methods have been performed for safe tunnel construction during tunnel excavation. Pole-pole array among the electrical resistivity survey, which is one of the tunnel ahead prediction method, has been utilized to predict water-bearing sediments or weak zone located within 5 times of tunnel diameter. One of the most important processes is the estimation of virgin ground resistivity and it can be obtained from the following process: 1) calculation of contact area between the electrodes and the medium, and 2) assumption of the electrodes as equivalent spherical electrodes which have a same surface area with the electrodes. This assumption is valid in a small contact area and sufficient distance between the electrodes. Since the measured resistance, in general, varies with the electrode size, shape, and distance between the electrodes, it is necessary to evaluate the influence of these factors. In this study, theoretical equations were derived and experimental tests were conducted considering the electrode size, shape, and distance of cylindrical electrodes which is the most commonly utilized electrode shape. Through this theoretical and experimental study, it is known that one should be careful to use the assumption of the equivalent half-spherical electrode with large ratio between the penetrated depth and radius of the cylindrical electrode, as the error may get larger.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.9-16
• /
• 2019

Recently, precast PSC girder bridges have been widely applied for short and middle span bridges. The construction of the spliced girder bridges has been increasing to overcome the length limit of girder and transportation restrictions. In case of the spliced girder, the integrity of the segmental joints is very important to secure the structural soundness of bridge because the discontinuity on the segmental joints between adjacent segments could be vulnerable point. The study of segmental joint behavior with different influence factors of joint type, shear key installation, confining force is very important. In this research, finite element analysis and scaled model test with different shear key shapes and confining forces were carried out and the comparative study was performed to evaluate the segmental joint behavior of precast spliced PSC girder bridge. It was confirmed that the installation of shear key with height and depth ratio of 1/2~1/3 and applying of confining force of 1/2 of the concrete strength at the joint was effective in improving the integrity of segmental joint. In addition, the field loading test for existed precast spliced PSC girder bridge was performed and the measurement of the difference of deflection between adjacent segments at segmental joint was proposed as the assessment solution of the integrity of segmental joint.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.481-487
• /
• 2019

Additive manufacturing is a state-of-the-art manufacturing process technology in which three-dimensional structures are fabricated by laminating two-dimensional sections of a structure using various materials such as plastic, ceramics, and metals. The additive manufacturing technology has the advantage of high design freedom, while the surface property (roughness) of the finished product varies depending on the process conditions, which necessitates performing a post-process after the products are manufactured. In this study, the surface roughness of a structure made of polyamide 12, which was manufactured by SLS (Selective Laser Sintering) and MJF (Multi Jet Fusion) process was compared. The processing condition was classified by the building orientation of structure as 0, 45, and 90 degrees, which is the angle between the analytical surface and the horizontal plane of the fabrication platform. Structures with a hole of various diameters ranging from 1mm to 10mm were manufactured and the hole characteristics (ratio of hole depth to diameter) and results of the specimens were compared. As a result of the surface characteristics analysis, the surface roughness value of the specimens manufactured with a building orientation of $45^{\circ}$ was the highest in both technologies. In the case of the through-hole structure fabrication, the shape was maintained with 5mm and 10mm diameter holes regardless of the building orientation, although the hole forming was difficult for the smaller holes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.102-110
• /
• 2019

The shipbuilding and offshore plant industry of Korea is important and leads Korea's economic growth, designated as the 1st to 4th export items in Korea in terms of export contribution over the period from 2011 to 2015. This study proposes ways to improve the national competitiveness of Korean shipyards in the global offshore drilling market by reviewing a business model for providing an integrated offshore drilling commissioning service in Korea. This commissioning service model, which was attempted in 2014, was reviewed, and a new proposed business model for overcoming the limitations of the previous model and activating further business was evaluated. As a result of an economic evaluation, it was found that a 150-meter water depth model is economically more effective. As the number of integrated commissions increased from 2 to 5 times per year, NPV, IRR and B/C ratios increased and the fee per use decreased. Therefore, for offshore drilling facilities constructed and delivered in Korea, it will be necessary to encourage integrated offshore commissioning.

• Journal of Korea Trade
• /
• v.25 no.5
• /
• pp.39-57
• /
• 2021

Purpose - This research uses ocean marine insurance (OMI) statistics, international emails, focus-group interviews, and surveys to fill the gap between the theory of behavioral insurance, particularly status quo bias (SQB), and the practice of OMI in Korea. The contractual forms of OMI, the oldest and most globalized form of commercial insurance, were developed in the UK as the Institute Cargo Clauses in 1906 and revised in 1963, 1982, and 2009. SQB has been academically explored, mostly in health insurance and the financial services sector, but never in OMI. Thanks to the availability of OMI statistics in Korea, we can conduct SQB research here for the first time in this field. Design/methodology - We show the existence of SQB in the OMI of Korea through Korean statistics between 2009 and 2018, email correspondence with experts in the UK, Germany, and Japan, focus-group interviews with Korean OMI underwriters, an in-depth interview with one underwriter, and a survey of 15 OMI insureds (company representatives). Findings - We find that Korean foreign traders rely on the old-type OMI contracts developed in 1963, whereas other industrialized countries use the newest type of OMI contract developed in 2009. With a simple loss ratio analysis during 2009-2018, we show that the behavior of insurers has little to do with rational profit maximization and is instead driven by irrational bias, as they forgo the more profitable contracts provided by the new clauses by keeping the old clauses. The consistent addiction to old types of contracts in the OMI market suggests strong SQB among Korean exporters, importers, bankers, or insurers, which we confirmed in our interviews and survey. Originality/value - This research has significant originality and academic value because it reports new findings with crucial implications for the development of efficient trade practices and policy. First, this research is based on actual statistics that have not been used in previous Korean research on OMI. Second, this research shows that all-risk OMI policies provide more value to insureds, in terms of coverage given premium, than partial coverage policies, which differs from arguments previously made in Korea. Third, this research reveals strong SQB in Korea, where foreign trade plays a pivotal role in economic growth. That bias could be attributable to uninformed traders, informed but idle insurers, or conservative bankers. Fourth, to further develop foreign trade, policy initiatives are needed to review the current practices of OMI contracts and move forward with the new contract forms. All of these findings and arguments are both new and important.

• Korean Journal of Environment and Ecology
• /
• v.35 no.3
• /
• pp.277-284
• /
• 2021

This study surveyed the ecological characteristics of Squalidus gracilis majimae at Nakdong River tributary Sinan Stream from January to December 2020. The species inhabited the riverbed that was mostly covered with gravel and sand. The water depth was 27-158 cm, and the average was rather deep at 54 cm. The stream velocity was slow at 0.41±0.19 (0.24-0.86) m/sec. The gender ratio of females to males was 1:0.73. According to the total length-frequency distribution, the age indicated that the group with less than 50 mm in total length was one year old, the group with 70-69 mm was two years old, and the group over 70 mm was three years old. The total length of sexually mature fishes was 50 mm for females and 60 mm for males. The spawning season was from June to July, and the water temperature was 20.9-23.4℃ during the period. The prosperous spawning season was July. The average number of eggs in the ovaries was 1,009 (595-1,630) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 0.78±0.08 (0.57-0.83) mm. The live foods were S. gracilis majimae Protozoa, attached algae, zooplankton, and aquatic insects. The feeding habits of S. gracilis majimae are omnivorous, but more than 80% of the stomach content was aquatic insects, Chironomidae spp. The larger the size of this species, the greater the amount and frequency of eating aquatic insects, which are animal feeds. The population that ate aquatic insects did not eat vegetable food.

• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.189-200
• /
• 2021

To improve the water quality of agricultural reservoirs, constructed wetlands are applied in many places. These are technologies that establish ecosystems and important design factors include water depth distribution, inflow and outflow, water flow distribution, hydraulic residence time, water quality treatment efficiency, aspect ratio, and the distribution of open water and covered water surfaces. For high efficiency during the operation of a constructed wetland, the design needs to be optimized and this requires consideration of the different types and length of the intake dam as well as the type and connection of wetland cells. Therefore, this study was conducted to investigate and suggest factors that needs to be considered during the design and for efficient operation measures through field surveys of 23 constructed wetlands that have been established and operated in agricultural reservoirs. Results of the field investigation shows that several sites were being operated improperly due to the malfunctioning or failure of the water level sensors, sedimentation in the intake dam, and clogging of the mechanical sluice frames. In addition, it was found that as the length of the inlet channel increases, the ecological disconnection between the intake dam upstream and the wetland outlet downstream also increases and was identified as a problem. Most of the wetlands are composed of 2 to 5 cells which can result to poor hydraulic efficiency and difficulty in management if they are too large. Moreover, it was found that the flow through a small wetland can be inadequate when there are too many cells due to excessive amounts of headloss.

• Conservation Science in Museum
• /
• v.26
• /
• pp.119-142
• /
• 2021

The gilt-bronze-and-silver shoes, excavated from the Tomb of King Muryeong, revealed many defective parts, which constantly raised in-depth re-investigation and reporting. In that point, scientific treatment and analysis were conducted to investigate the manufacturing techniques applied. The conservation treatment was carried out with an emphasis on the restoration of the original form and joining parts. As a result, the upper part of the right shoe and some part of the back heel were joined, confirming the joining method and the number of rivet used for instep bonding. From the component analysis, it is presumed that the outer plate was gilded with mercury amalgam on pure copper, and pure silver was used for the inner plate. The main pattern of the gilt-bronze-and-silver shoes includes designs of phoenix, lotus, and six-petal flower, while the lotus pattern is high in terms of ratio. Thus, youngnaksa(twisted gilt-bronze thread), geumdongsa(gilt-bronze thread), wondujeong (rivet), and samyeonjeong(quadrangular cleats) were used for bonding each plate. Twisted gilt-bronze thread was used to join the inner and outer plates, while the center and rear of the inner plate were combined with only gilt-bronze threads. From the fact, it is presumed that the joining method was different whether the function was decoration or just bonding. Regarding the manufacturing process, traces of burnishing were confirmed on the outer surface of the gilt-bronze and silver shoes, but no burnishing traces were identified on the inner surface of the silver plate, which is likely to prove more importance put on the finishing of the outer plates rather than that of the inner.

• Korean Journal of Environment and Ecology
• /
• v.35 no.6
• /
• pp.601-608
• /
• 2021

This study surveyed the ecological characteristics of Squalidus multimacultus at Taehwa River tributary Cheokgwa Stream from January to December 2020. The species inhabited the riverbed that was mostly covered with sand. The water depth was 25-164 cm, and the average was rather deep at 68 cm. The stream velocity was slow at 0.21±0.26 (0.16-0.43) m/sec. The gender ratio of females to males was 1:0.99. The age according to the total length-frequency distribution indicated that the group with less than 50 mm (29.4 - 49 mm) in total length was one year old, the group with 50 - 69 mm was two years old, the group with 70 - 89 mm was three years old, and the group over 90 mm was four years old. The total length of sexually mature fishes was 40 mm for both males and females. The spawning season was from July to August, and the water temperatures was 23.8 - 25.4℃ during the period. The prosperous spawning season was August. The average number of eggs in the ovaries was 1,395 (648 - 2,201) per matured female, and the matured eggs were yellowish and spherical with a mean diameter of 0.67±0.24 (0.62 - 0.83) mm. The live foods were of S. multimacultus attached algae, zooplankton, aquatic insects, and Mollusca. The feeding habits of S. multimacultus were omnivorous, but more than 95% of the stomach content was plant-attached algae. The larger the size of this species, the greater the amount and frequency of eating aquatic insects, which were animal feeds. The population that ate aquatic insects did not eat vegetable food.

• Korean Journal of Environment and Ecology
• /
• v.36 no.4
• /
• pp.381-389
• /
• 2022

This study investigated the ecological characteristics of Microphysogobio yaluensis at Dugye Stream of Geum River basin from January to December 2021. The river bed structure of this species' habitat was rich in pebbles and gravel. The water depth ranged from 12 to 85 cm with an average of 23 cm, which was shallow. The stream velocity was rapid at 1.03±0.34(0.72-1.47) m/sec. The ratio of females to males was 1:0.86. The age according to the total length-frequency distribution as of summer (June, July) indicated that the group with less than 50 mm (30.4-49 mm) in total length was one year old, the group with 50-69 mm was two years old, and the group over 70-92 mm was three years old. Both male and female fish sexually matured at 50 mm long and two years old in June and July. The spawning season was from July to August, and the water temperature was between 25.8℃ and 28.2℃ during the period. The prosperous spawning season was July. The matured eggs were yellowish and spherical with a mean diameter of 0.52±0.16 (0.33-0.77) mm, and the average number of eggs found in the ovaries of mature female fish was 2,593 (1,343-4,672). As for the food of M. yaluensis, only attached algae, which grow by attaching to stones and gravel of the stream rapids, were identified. The feeding habit of M. yaluensis was reported to be herbivorous, ingesting Cyanophyta, Chlorophyta and Bacillariophya. Also, the species belonging to Bacillariophya and Chlorophyta were abundant in Dugye Stream.