• 한국농공학회지
• /
• 제15권1호
• /
• pp.2853-2877
• /
• 1973

Models of cross-sections and channels were made in order to measure seepage losses. Cross-sections were made of sand, sandy clay loam and loam, their thicknesses being 30cm and 40cm, respectively. Flow depths kept in the cross-sections were 4cm, 6cm, 8cm and 10cm. Straight and curved channel models were provided so as to measure seepage losses, when constant water depths maintained at the heads of the channels were 7.3cm and 5.7cm, respectively. The results obtained in this experiment are presented as follows: 1) A cumulative seepage loss per unit length at a point in the channel varies in accordance with time and flow depth. The general equation of cumulative seepage loss may be as follows(Ref. to Table V.25): $$q_{cum}=\int_{o}^aq(a)dt+\int_a^bq(b)dt+\int_b^tq(c)dt$$ 2) In case that the variation of water depth through the channel is slight, the total seepage loss may be computed by applying the following general equation: $$\={q}_{cum}{\cdot}x=\int_o^tq_{cum}\frac{{\partial}x}{{\partial}t}dt$$ 3) Because seepage loss varies considerably according to water depth in case that the variation of flow depth through the channel is great, seepage loss should be computed by taking account of the change of flow depth. 4) The relation between time and traveling distance of water flow may be presented as the following general equation(Ref. to Table V.29): $$x=pt^r$$ 5) The ratios of the seepage losses of the straight channel to the curved channel are 1:1.03 for a flow depth of 7.3cm and 1:1.068 for that of 5.7cm. 6) The ratios of the seepage losses occurring through the bottom to those through the inclined plane in the channel cross-section are 1:2.24 for a water depth of 8cm and 1:2.47 for a depth of 10cm in case that soil-layer is 30cm in thickness. Similarly, those ratios are 1:2.62 and 1:2.93 in case of a soil-layer thickness of 40cm(Ref. to Table V.5).

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1357-1371
• /
• 2024

To investigate the influence of different burial conditions on the seepage characteristics of loose sandstone in the leaching mining of sandstone uranium ore, this study applied different ground pressures and water pressures to rock samples at different burial depths to alter the rock's seepage characteristics. The permeability, pore distribution, and particle distribution characteristic parameters were determined, and the results showed that at the same burial depth, ground pressure had a greater effect on the reduction in permeability than water pressure. The patterns and mechanisms are as follows: under the influence of ground pressure, increasing the burial depth compresses the pores in the rock samples, decreases the proportion of effective permeable pores, and causes particle fragmentation, which blocks pore channels, resulting in a decrease in permeability. Under the influence of water pressure, increasing the burial depth expands the pores but also causes hard clay particles to decompose and block pore channels. As the burial depth increases, the particles eventually decompose completely, and the permeability initially decreases and then increases. In this experiment, the relationships between permeability and the proportion of pores larger than 0.15 ㎛ and the proportion of particles smaller than 59 ㎛ were found to be the most significant.

• 한국농공학회지
• /
• 제23권3호
• /
• pp.88-95
• /
• 1981

This study was carried out to investigate the relation between seepage losses and flow section area in earth canals. Totally 77 seepage measurement was gained by ponded method and the tested canals belong to the irrigation area of Farmland Improvement Association in each province, Korea. The results obtained from this study may be used as a reasonable criteria for the estimation of canal seepage losses in the design of irrigation systems. Obtained results are summarized as follows: 1. Average seepage rates in each Soils is 14cm/day in ML, 6. 3cm/day in CL and 24.9 cm/day in SM. 2. Water depth and water surface width in eath canals have little influenced on the seepage rate, while the seepage losses was increased in proportion as the water surface width lengthens. 3. A formula of S=C.An defining a relationship between seepage losses and flow section was derieved as follows. ML:S=O. 35 VA 1.20 (m$^3$/day/m) CL:S=O. 13 VA 0.84 SM:s=O.67VA-1.56 4. The average seepage loss rates per 1km of canal are as followings. Measured Time ML CL SM 0-4 hrs 2.2% 0.6% 4.5% 4-2 4hrs 1.0% 0.15% 2.0% In above table we may obtain the following results. The first row is suitable for the canal having short delivery time of irrigation, while the second row for the canal having long delivery time.

• Geomechanics and Engineering
• /
• 제32권2호
• /
• pp.145-157
• /
• 2023

This paper aims at investigating the face stability of large-diameter underwater shield tunnels considering seepage in soft-hard uneven strata. Using the kinematic approach of limit upper-bound analysis, the analytical solution of limit supporting pressure on the tunnel face considering seepage was obtained based on a logarithmic spiral collapsed body in uneven strata. The stability analysis method of the excavation face with different soft- and hard-stratum ratios was explored and validated. Moreover, the effects of water level and burial depth on tunnel face stability were discussed. The results show the effect of seepage on the excavation face stability can be accounted as the seepage force on the excavation face and the seepage force of pore water in instability body. When the thickness ratio of hard soil layer within the excavation face exceeds 1/6D, the interface of the soft and hard soil layer can be placed at tunnel axis during stability analysis. The reliability of the analytical solution of the limit supporting pressure is validated by numerical method and literature methods. The increase of water level causes the instability of upper soft soil layer firstly due to the higher seepage force. With the rise of burial depth, the horizontal displacement of the upper soft soil decreases and the limit supporting pressure changes little because of soil arching effect.

• 한국지반환경공학회 논문집
• /
• 제2권1호
• /
• pp.57-65
• /
• 2001

본 연구에서는 증축하천제방의 침투거동과 안정성을 평가하기 위하여, 증축부의 투수계수와 홍수시 강우로 인한 수위상승속도를 3가지 경우로 변화시켜 가면서 평행흐름조건에서 침투모형실험과 유한요소해석을 통한 침윤선 변화와 홍수직후의 수위급상승시 제체사면의 안정성을 분석하여 제체침식에 대한 사면의 불안정성을 검토하였다. 침투모형실험은 평행흐름조건에서 서로 다른 증축재료의 투수계수 $k_1$, $k_2$, $k_3$와 홍수시 발생 가능한 수위상승속도 $v_1$, $v_2$, $v_3$를 각각 변화시키며 수행되었다. 증축체제의 침투거동은 증축부의 투수계수가 클수록 초기 침투거리가 길고, 제체하류사면에 유출점이 점차로 상승하며 시간에 따른 안전율이 감소하면서 국부적인 붕괴로 이어지는 불안정한 침투거동을 보여준다. 또한, 제체사면의 붕괴양상은 수위상승속도가 증가할수록 붕괴발생높이와 붕괴깊이가 증가함을 보여준다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.719-722
• /
• 2005

The watertightness of concrete is judged by the depth of penetration of water forced in under pressure with the mechanism of flow of seepage water examined theoretically and experimentally. As a result, it is found that in the case of low water pressure approximately 0.15Mpa or less, the flow is Darcy seepage flow, the same as flow in an ordinary sand stratum, whereas in the case of high water pressure, the flow is diffused seepage flow accompanied by internal deformation of concrete. It is suggested that the watertightness of concrete be evaluated by seepage coefficient in the case of the former and diffusion coefficient in the case of the latter.

• 한국지반환경공학회 논문집
• /
• 제17권8호
• /
• pp.29-37
• /
• 2016

해상처분장에서 내부 오염물질의 외부 유출을 방지하기 위하여 연직차수벽체가 설치된다. 연직차수벽체가 오염물질의 이동을 효과적으로 차단하기 위해서는 연직차수벽체가 해저지반의 적정 근입깊이까지 설치되어야 한다. 본 연구에서는 연직차수벽체 근입심도에 따른 해저지반을 통한 침투 및 오염물질 이동특성을 분석하기 위하여 2차원 유한요소해석 프로그램인 SEEP/W를 이용한 침투해석과 3차원 유한차분해석 프로그램인 Visual Modflow를 이용한 오염물질 이동해석을 수행하였다. 수치해석결과, 연직차수벽체는 저투수성 지반으로 일정 깊이 이상 근입되면 오염물질 유출방지 효과를 갖는 것으로 나타났다. 따라서 경제적인 연직차수벽체 설계를 위해서는 오염물질 이동을 차단할 수 있는 효과적인 최소 근입심도를 산정하여 적용하는 것이 효과적일 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.75-85
• /
• 2006

In recent geotechnical engineering, geothermal approach has been on the horizon to deal with geoenvironmental issues, freezing and thawing problems, and seepage phenomenon in dams and embankments. In this study, geothermal characteristic through inner body of dams and its influence on the seepage flow were experimented by lab test and field instrumentation. Also, one of up-to-date temperature monitoring technique, called as multi-channel thermal line sensing, was evaluated its availability. As a result of lab test, it is found that the seepage flow has influence on the geothermal characteristic and a potential of finding phreatic line and seepage fluctuation could be possible by continuous temperature monitoring using thermal line sensing skills. These kine of geothermal information could be available to the modelling of water geo-structure interaction. Out of short-term field tests, clear water table and temperature distribution of a dam were easily found through temperature monitoring in holes located near a reservoir and holes within a depth of constant temperature layer. However, it is also found that the geothermal flow and finding seepage line could not be easily understandable through multi-channel temperature monitoring because of the existence of constant temperature field, thermal conductivity of soils and rocks, and unsaturated characteristics of geo-material. In this case, long-term geothermal monitoring is recommended to find sudden fluctuation of seepage line and amount of leakage.

• 한국터널지하공간학회 논문집
• /
• 제13권6호
• /
• pp.431-450
• /
• 2011

원형수직터널의 시공시 지하수가 존재하는 경우 굴착에 의해 지하수의 흐름이 발생되어 추가적인 힘이 작용하게 된다. 원형수직터널의 지하수의 흐름은 일반적인 수평터널과 달리 깊이방향으로 다르게 작용되며, 수직터널의 벽체에 경사방향으로 작용하게 된다. 본 연구에서는 원형수직터널에 작용하는 침투력의 영향을 파악하기 위해 깊이에 따라 변하는 경사방향의 흐름성분을 수직과 수평방향으로 나누어 각각을 이론식에 적용하였다. 지하수가 영향을 미치는 범위는 토압을 야기하는 이완영역과 같은 것으로 가정하여 이론식을 유도하였다. 침투력에 의해 발생되는 추가적인 힘으로 인하여 원형수직터널의 이완영역에 작용되는 응력이 달라짐에 따라 침투력을 고려한 토압계수 산정식과 원형수직터널 벽체에 작용하는 응력 산정식을 본 연구를 통해 제안하였다. 가상지반을 설정하고 제안식을 적용한 결과, 침투를 고려하지 않은 건조한 지반에 비하여 수직방향응력은 약 1.4배, 토압은 2.5배 증가하는 결과를 보였다. 침투해석을 통하여 "유효응력+침투력"으로 구한 값과 제안식을 이용하여 산정한 값은 유사한 경향을 보여 제안식은 침투력을 적절히 고려하여 토압을 예측하는 것으로 나타났다.

• 지질공학
• /
• 제31권2호
• /
• pp.165-178
• /
• 2021

자연사면을 대상으로 강우에 따른 침투해석 및 사면안정해석을 통하여 사면토층의 흙-함수특성곡선(SWCC) 맞춤계수에 따른 안정성의 영향을 평가하였다. 연구 대상사면의 토질시료를 채취하여 토층의 물리적, 역학적 및 불포화 특성을 실험하였다. 현장조건의 흙-함수특성곡선(SWCC)의 맞춤계수 α 및 n을 변화시켜 침투해석을 통한 포화심도를 산정하였으며, 이를 고려하여 한계평형해석기법을 이용한 사면안정해석을 수행하였다. 강우에 의한 침투해석 결과에 따르면 맞춤계수 α가 감소함에 따라 토층 내 포화심도가 급격하게 증가하며, 전체 토층에 대한 포화시간도 짧아지는 것으로 나타났다. 그리고 포화심도를 고려한 사면안정해석결과에 의하면 맞춤계수 α가 감소함에 따라 사면안전율은 급격하게 감소하지만, 맞춤계수 n을 증가시키더라도 사면안전율의 변화는 매우 작은 것으로 나타났다. 따라서 강우침투로 인한 포화심도와 이를 고려한 사면안정성은 흙-함수특성곡선(SWCC)의 맞춤계수 α에 크게 영향을 받으며, 맞춤계수 n의 영향은 상대적으로 매우 작음을 알 수 있다.