• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.419-427
• /
• 2002

Meiobenthic community structure near Dokdo was investigated during two survey periods of June, 1999 and October 2000. Meiobenthos were separated from the sediment core samples collected from eight stations. A total of 19 meiobenthic animal groups were identified from those core samples. The most abundant meiobenthic animals belonged to Phylum Nematoda in both seasons and all stations. Sarcomastigophorans, nauplius of crustaceans, and benthic harpactiocoids were the next abundant meiobenthos. Vertical distribution of meiobenthic animals showed the highest individual numbers in the surface sediment layers of 0-1cm depth with a steep decreasing trend with depth for the three sampling stations (A0, A9', A19) located in the continental slope. Horizontal distribution of meiobenthic animals for the study area near Dokdo showed lower density at the sampling stations near Dokdo and the lowest density of meiobenthos in A19 (depth-2261 m). For size distribution, analysis showed that animals which fit onto the mesh size of 0.125mm were abundant. This study suggested that the continental shelf near Dokdo have a more unstable environment fo meiobenthos than the continental slope.

• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.457-464
• /
• 2002

Distribution and stock assessment of mega-benthos living in the shallow hard bottom around Dokdo were studied in July,2000. Depth and topographical conditions have affected to the densities and biomass of benthic animals. In shallow area, less than 10 m depth, turbo shell Batillus cornutus, mussel, Mytilus corusucs were dominated and showed distinct patterns in vertical distribution. On the other hand, the area over 10m depth, it showed diverse pattern depending on topography. Turbo shell, mussel and sea cucumber Stichopus japonicus were dominated in terms of fishery resources, but abalones were rarely sampled. Stock assessment were estimated to be 6.54 M/T, 3.89 M/T and 8.92 M/T, respectively. Some parts of coastal hard bottom around Dokdo, such as the area between Dongdo and Seodo, seemed to play an Important role as nursery ground. Therefore, it is necessary to the environmental monitoring for coastal fishery managements aspects.

• Water for future
• /
• v.9 no.1
• /
• pp.101-105
• /
• 1976

This Study is developed in order to determine the probability of a raintall depth of short duration in Seoul as considering the profect life and the factor of safety of hydraulic structures. The raw annual maximum rainfall data are selected from 1915 to 1974 about short duration (10min-120min.) in Seoul. The selected data are treated by frequency analysis, and the hypothesis that the distribution fuction of the raw data is normal Distribution is performed by chi-square test that signifcance level has 5%. With the parameters (mean and standard deviation) of the accepted distribution function, the probabilitn of a rainfall depth can be easily determined on the graph which is made on this paper.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.297-302
• /
• 2018

The wedge filter has two movements, fixed and dynamic. In this study, the depth dose distribution was analyzed to determine the stability of the dose distribution and dose volume histograms obtained by evaluating the usability of the critical normal tissue dose around the tumor dose. The depth dose was analyzed from the dose distribution from a Linac (6 MV and 10 MV irradiation field of energy $20{\times}20cm^2$, wedge filter with a SSD of 100 cm and $15^{\circ}$, $30^{\circ}$, $45^{\circ}$ Y1-in (Left -7 cm), Y2-out(Right +7 cm). To analyze the fluctuations of the depth dose, a fixed wedge and dynamic wedge toe portion was examined according to the energy and angle because the size of the fluctuations was included in the error bound and did not show significant differences. The neck, breast, and pelvic dosimetry in tumor tissue are measured more commonly with a dynamic wedge than a fixed wedge presumably due to the error range. On the other hand, dosimetry of the surrounding normal tissue is more common using a fixed wedge than with a dynamic wedge.

• Radiation Oncology Journal
• /
• v.1 no.1
• /
• pp.29-36
• /
• 1983

The treatment of tumors along curved surfaces with stationary electron beams using cone collimation may lead to non-uniform dose distributions due to a varying air gap between the cone surface and patient. For large tumors, more than one port may have to be used in irradiation of the chest wall, often leading to regions of high or low dose at the junction of the adjacent ports. Electron-beam arc therapy may elimination many of these fixed port problems. When treating breast tumors with electrons, the energy of the internal mammary port is usually higher than that of the chest wall port. Bolus is used to increase the skin dose or limit the range of the electrons. We invertiaged the effect of various arc beam parameters in the isodose distributions, and combined into a single arc port for adjacent fixed ports of different electron beam eneries. The higher fixed port energy would be used as the arc beam energy while the beam penetration in the lower energy region would be controlled by a proper thickness of bolus. We obtained the results of following: 1. It is more uniform dose distribution of electron to use rotation than stationary irradiation. 2. Increasing isocenter depth on arc irradiation, increased depth of maximum dose, reduction in surface dose and an increasing penetration of the linear portion of the curve. 3. The deeper penetration of the depth dose curve and higher X-ray background for the smaller field sized. 4. If the isocenter depth increase, the field effect is small. 5. The decreasing arc beam penetration with decreasing isocenter depth and the isocenter depth effect appears at a greater depth as the energy increases. 6. The addition of bolus produces a shift in the penetration that is the same for all depths leaving the shape of the curves unchanged. 7. Lead strips 5 mm thick were placed at both ends of the arc to produce a rapid dose drop-off.

• Geotechnical Engineering
• /
• v.5 no.4
• /
• pp.5-16
• /
• 1989

This paper statistically analyses the freezing soil by frost group and frost depth in Korea with data from soil testing in the Korea National Housing Corporation, the climate data provided by the Central Weather Office and the data on the frost depth from the National Construction Laboratory Institute. In this paper, freezing variable are analysed such as percentage finer than 0.02 m by weight, plasticity index, freezing index, water contents of soil and frost depth etc‥‥ The result of the analysis is as follows. 1) The frost depth of Korea depends on the properties of soil rather thank the characte fistic of area. 2) The distribution map of design freezing index in 57 cities is drawn up with the maxi- mum freezing index, during past 14 years, calculated by the average of the air temperature observed four times(03 : 00.09 00, 15 : 00, 21 : 00) a day. 3) By correcting the OLS line estimated from the relationship between freezing index and frost depth, a method of utlizing the line with the upper confidence limit of 99.9% int-distribution as predicted maximum frost depth is newly introduced.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.12
• /
• pp.51-60
• /
• 2010

Earth pressure due to gravity generally increases linearly with the depth, but the distribution of earth pressure due to surface load depends on the loading condition, the ground condition, and the boundary condition. In this study, the earth pressure on a rigid wall due to the vertical surface load was measured in experiments. Rigid wall was built in the model test box, and it was filled with homogeneous sandy ground (width 30 cm, height 88 cm, length 110 cm). Rigid wall was composed of 8 segments, which were tested on the two load cells. In the tests, we observed the distribution of the earth pressure on the rigid wall depending on the vertical surface load and it's location. According to the test results, the lateral earth pressure due to the vertical surface load showed its maximum value at a constant depth and decreased with the depth, to the negligible value at the critical depth. The critical depth and the depth at which lateral earth pressure reaches its maximum were not decided by the magnitude of the vertical surface load. They were dependant on the distance from the rigid wall.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1907-1914
• /
• 1995

An on-line measurement of the workpiece hardened depth in laser surface hardening processes is very much difficult to achieve, since the hardening process occurs in depth wise direction. In this paper, the hardened depth is estimated using a multilayered neural network. Input data of the neural network are the surface temperatures at arbitrary chosen five surface points, laser power and traveling speed of laser beam torch. To simulate the actual hardening process, a finite difference method(FDM) is used to model the process. Since this model yields the calculation results of the temperature distribution around the workpiece volume in the vicinity of the laser torch, this model is used to obtain the network's training data and laser to evaluate the performance of the neural network estimator. The simulation results show that the proposed scheme can be used to estimate the hardened depth with reasonable accuracy.

• Journal of Environmental Science International
• /
• v.11 no.6
• /
• pp.529-535
• /
• 2002

Efffcts of physico-chemical factors on the zonation and vertical distribution of benthic microalgal communities in the tidal flats of Youngkwang and Canaiin, Korea, were studied. Concentrations of nutrients were low throughout the study period. A 38 species of benthic microaigae was identified. Most of the algae were pennate diatoms with small size. Cell numbers at silty sediments were higher than sandy sediments, and showed high patchy distribution. Zonal distributions of benthic microalgae showed higher variation from silty sediment than sandy sediments. Benthic microalgae showed vertical migration within the upper few mm of sediment with periodicity closely related to tidal cycles. Maximum cells were observed from 0 mm depth both sandy and silty sediments. Cells of benthic microalgae in the 1 - 2 mm depth decreased after desiccation of sediments. The variation of cells was higher at sandy sediments than silty sediments. Cell numbers of benthic microalgae showed no positive relationships with pH and nutrinets except NH$_4$-N.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.422-425
• /
• 2005

This study predicts the heat-affected zone (HAZ) after electrical discharge machining. To predict HAZ, the temperature distribution is calculated using FEM. Heat flux is calculated from electrical energy, and it can be assumed Gaussian distribution. Plasma channel expands as time goes. Copper and NAK80 are used as the workpiece material. The depth of HAZ in simulation is determined by temperature distribution. The simulation results were compared with a developed actual single discharge crater. Through investigating the cross section of simulated & actual craters, the depth of HAZ in simulation and experiment are compared. Simulation model can predict the crater shape.