• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.652-658
• /
• 1997

The phase stability in the interface of Sr-doped LaMnO3(LSM)/Gd-doped CeO2(CGO) was examined in this study in order to check the feasibility of using LSM as the cathode material in a low-temperature SOFC(solid oxide fuel cell) using CGO as the electrolyte. For the purpose, CGO powders of Ce0.82Gd0.18O0.91 and two LSM powders having different compositions, La0.9Sr0.1MnO3(LSM10) and La0.5Sr0.5MnO3(LSM50), were synthesized using Pechini method. Then, specimens having the LSM/CGO interface were prepared, heat-treated at 130$0^{\circ}C$ for up to 3 days, and analyzed by XRD and STEM/EDX. Face-centered cubic CGO powders of less than 10 nm size were obtained by calcination of polymeric precursor formed in the process at 45$0^{\circ}C$. Higher calcination temperature of $700^{\circ}C$ was necessary for monoclinic LSM10 and cubic LSM50 powders. LSM powders were coarser than CGO and observed to be in the range of 50~100 nm. No trace of LSM-CGO interaction product was found in the XRD pattern. Also it was known from the concentration profile in the vicinity of the interface that interdiffusion was occurred over only a small penetration depth of ~100 nm order.

• Journal of the Korean Society of Costume
• /
• v.54 no.8
• /
• pp.1-14
• /
• 2004

The aim of this study is to provide fundamental data on the development of ready-to-wear clothing appropriate for the lower body types of male students who play sports in college. The study was conducted by means of targeting 151 male sports majors between $18{\sim}27$ years of age. Characteristics of the respondents were ascertained by means of questionnaires and an evaluation of a total of 36 lower body features. The results of the study are as follows. 1. A comparison of anthropometric measurements with the National Anthropometric Survey of Korea (1997) revealed that the main characteristics of the lower somatotypes of male sports college students are large circumferences and developed muscles of the lower body. 2. Sports were classified into the following five categories : soccer, bodybuilding, wrestling, judo, and taekwondo. In particular, bodybuilding students demonstrated a somatotype with an increased circumference, depth, and width of the thigh and lower body. 3. Somatotypes were classified into 3 types by means of a cluster analysis employing S factors. Type 1 somatotype exhibits a large circumference in the lower body. Type 2 is a lower somatotype of a middle size. Finally, Type 3 encompasses a smaller group in weight and circumference with a developed calf and ankle. 4. Each group was evaluated using a discriminatory analysis as a check to see if the groups had been discriminated with accuracy. The total accuracy rate was 96.0%.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.57-65
• /
• 2006

In general, the investigation for reservoir dredging are conducting a observation on the horizontal position and the depth of water by assembling GPS/Echo Sounder and Total Station/Echo Sounder, and it is computed at a section computation of riverbed, reservoir volume and dredging plan etc. at that times, the detail plane is determinated about soil volume, height for dredging. Planning has a fault that the method of sound detection using the Echo Sounder doesn't check up distribution of reservoir deposit. In this study, the author emphasizes that implementation of dredging with combined Global Positioning System(GPS) and Ground Penetration Radar(GPR) is well-done more than existed GPS/Echo Sounder. the combined equipment can be adapted to computation and dredging reffering to distribution of deposition. First of all, it is executed water tank modelling test through sampling for apply to test area and is estimated the possibility after passed far accuracy verification of equipment.

• Korean Journal of Optics and Photonics
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2017

A method for inspecting defects in display substrates utilizing Fourier optics is proposed in this paper. A cost-effective inspection system can be realized with the proposed method, because it does not require a high-magnification microscope. Also, the proposed method can avoid tight tolerance for variations in displacement between substrate and camera, which is stems from shallow depth of field of the high-magnification microscope. In addition, possible damage caused by collisions between substrate and the inspection equipment can be avoided. The decision algorithm can be simpler than for a conventional inspection system, because spatial shift of periodic substrate patterns does not affect the intensity distribution of the diffracted light, by the Fourier transform property. The proposed method is explained with numerical studies, and experiments are carried out to check its feasibility for color-filter substrates of a liquid-crystal display.

• The Korean Journal of Pain
• /
• v.8 no.2
• /
• pp.350-353
• /
• 1995

The first lesion in neural tissue produced by electrical currents were made in the 19th century by workers using direct current. In 1953, Sweet and Mark clearly demonstrated that DC lesions have unpredictable and ragged borders and may vary in size. They, as well as Hunsperger and Wyss, suggested that the use of high frequency currents might provide improved results and were proved correct. However, $Bovie^{(R)}$ electrosurgical unit may also be used in percutaneous medial branch neurotomy if a lesion made at a point or the dorsal surface of the transverse process just caudal to the most medial end of the superior edge of the transverse process (Bogduk's method). At this point the medial branch lies on the bone and its depth and medial displacement are defined by the bone which precludes the need for lateral radiographs to check placement. A lesion was made at same target point using the $Bovie^{(R)}$ electrosurgical unit in a 41 year male patient who had received a Kaneda operation because of L2 compression fracture. The patient was relieved of pain without any adverse effects.

• Current Photovoltaic Research
• /
• v.2 no.3
• /
• pp.120-123
• /
• 2014

Thermal doping method using furnace is generally used for solar-cell wafer doping. It takes a lot of time and high cost and use toxic gas. Generally selective emitter doping using laser, but laser is very high equipment and induce the wafer's structure damage. In this study, we apply atmospheric pressure plasma for solar-cell wafer doping. We fabricated that the atmospheric pressure plasma jet injected Ar gas is inputted a low frequency (1 kHz ~ 100 kHz). We used shallow doping wafers existing PSG (Phosphorus Silicate Glass) on the shallow doping CZ P-type wafer (120 ohm/square). SIMS (Secondary Ion Mass Spectroscopy) are used for measuring wafer doping depth and concentration of phosphorus. We check that wafer's surface is not changed after plasma doping and atmospheric pressure doping width is broaden by increase of plasma treatment time and current.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.705-712
• /
• 2001

It is of great importance to represent the directional ocean waves in a laboratory basin for hydraulic model tests. The directional ocean waves can be expressed as a linear superposition of a large number of component waves with different frequencies and propagating directions. The aim of the study is to check the wave generating characteristics by serpent-type wave generating system in PKNU (Pukyong National University) which is composed of 10 piston-type wave generators. In the experiment, spatial variation of irregular wave heights and propagating angles are measured in the multi-directional wave maker basin. Target wave directional spectrum is reproduced in the area of multi-directional wave maker basin. The directional spreading of the generated waves varied spacially in the basin. They differed from target spectrum as the measurement point becomes far from the center line normal to the generator face, The effective generation area where that target can be reproduced is limited to the triangular area attached the generator face. According to the results, it is emphasized that the effective experiment area in the basin considered wave generator characteristics should be determined in consideration of experimental conditions including structural shapes, water depth, wave directionality etc.

• Journal of the Korean Geophysical Society
• /
• v.8 no.4
• /
• pp.211-214
• /
• 2005

Low resistivity zone is observed at the lower part of a CFRD (Concrete Face Rockfill Dam). Generally, CFRD tends not to have any saturated zone within the body, but the result of resistivity survey shows that it is possible for the dam to be saturated under 20m depth with water. The level of reservoir was under 10 m from the crest. We suspect that this result may come from the wrong 2D inversion process ignoring the 3D geometry of dams. For the analysis of possibility of distortion by different geometry, we perform the 3D forward modeling for the dam and apply the 2D inversion process. And then we check the point of traditional interpretation of resistivity data. By the analysis, it is found that the result of 2D inversion process of 3D geometry of dams, seems to have deep relation with the reservoir level, and the complex 3D structure hide some internal electrical anomaly of dams from resistivity information.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.267-281
• /
• 2016

This study analyzed the contents of articles on GMO in Chosun Ilbo and Hankyoreh from 1994 through 2015 to check the trend of reporting on GMO as a science and technology risk issue. As a result, 'risk' and 'anxiety/concern' were continuously treated as important subjects, and there was a lack of depth and journalist's professionalism in all three periods: 'Introduction of GMO technology (1994-2000)', 'Development of GMO technology (2001-2010)' and 'Social acceptance of GMO (2011-2015).' In a comparison between the media with different ideological goals, the Chosun Ilbo had a stronger new-technological inclination to GMO than the Hankyoreh in reporting topics and tones of arguments. As a result of checking the relation of the tones in reporting with the 'risk-benefit' of GMO, reports in negative tones underlined 'risk' while those in positive tones, 'benefit.' This study could suggest improvements of subject bias and unprofessionalism in the domestic science journalism, the barometer of public awareness of disputes over science and technology risk.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.4
• /
• pp.161-170
• /
• 2014

Newmark-type deformation analysis has rarely been done in Korea due to the popularity of simple pseudo-static limit equilibrium analysis and detailed time-history FE/FD dynamic analysis. However, the Korean seismic dam design code updated in 2011 prescribes Newmark-type deformation analysis as a major dynamic analysis method for the seismic evaluation of fill dams. In addition, a design PGA for dynamic analysis is significantly increased in the code. This paper aims to study the seismic evaluation of four existing large fill dams through advanced FEM/Newmark-type deformation analyses for the artificial earthquake time histories with the design PGA of 0.22g. Dynamic soil properties obtained from in-situ geo-physical surveys are applied as input parameters. For the FEM/Newmark analyses, sensitivity analyses are performed to study the effects of input PGA and $G_{max}$ of shell zone on the Newmark deformation. As a result, in terms of deformation, four fill dams are proved to be reasonably safe under the PGA of 0.22g with yield coefficients of 0.136 to 0.187, which are highly resistant for extreme events. Sensitivity analysis as a function of PGA shows that $PGA_{30cm}$ (a limiting PGA to cause the 30 cm of Newmark permanent displacement on the critical slip surface) is a good indicator for seismic safety check. CFRD shows a higher seismic resistance than ECRD. Another sensitivity analysis shows that $G_{max}$ per depth does not significantly affect the site response characteristics, however lower $G_{max}$ profile causes larger Newmark deformation. Through this study, it is proved that the amplification of ground motion within the sliding mass and the location of critical slip surface are the dominant factors governing permanent displacements.