• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.109-114
• /
• 2016

This study presents the optimal hardness range for a coated layer of a workpiece when the diamond tool cuts the corner-cube pattern on the coated plates using an ultra-precision diamond-turning machine. Two kinds of coated plates, which have the hardness range of 211~328 Vickers hardness, are used on the first experiments. The form accuracy for the corner-cube pattern could be achieved through the following experiments using the accumulated thin copper plates in second experiments, having optimal 265~275 Vickers hardness based on the basic first experiments without tool wear. When the number of machining adjustments was increased to seven times, having machining depth was reduced successively in second experiment, a fine surface could be achieved without tool wear.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.209-214
• /
• 2002

Mechanical micro-engineering is an easy and cheap way to fabricate micro-structures. If the application of the conventional machining method using flat-end mill becomes available for the micro-manufacturing process, it will be advanced as an extension of the conventional machining process. In this study, micro-grooves cutting using flat-end mill(($\phi$8) was performed. The characteristics on flat-end milling was investigated to improve machinability of micro-grooves. The experiments were performed according to variations of spindle revolution, depth of cut, and feed rate. Machinability through various cutting conditions was evaluated by surface geometry, tool wear, and cutting force. The results show that micro V-grooves of width(pitch) 29${\mu}{\textrm}{m}$ were acquired by flat-end milling. The maximum and minimum roughness of the wall of grooves was 438 and 67nm, respectively

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.4 no.3
• /
• pp.67-76
• /
• 1995

An experimental study of hot machining has performed to improve the machinability of Inconel718. This experiment used plasma are for heating materials and Whisker0reinforce aluminum oxide ceramic tool insert. An assembled plasma heating system are described and experimental results from both conventional and plasma hot machining of Inconel 718 are compared. The experiments with plasma heating demonstrated the following effectiveness. 1)The cutting force was reduced with increasing surface temperature of workpiece from 450$^{\circ}C$ up to 720$^{\circ}C$ as much as approximately from 20 to 40%. 2) Surface roughness(Ra) was improved by as much as a factor 2 in case of one pass cutting with new ceramic tool inserts.3) The depth of cut notch were at promary cutting tool was significantly reduced.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.132-140
• /
• 1998

Recently, precision machining technology has been developed continuously in order to make high productivity and quality assurance of the precision parts of several industrial fields. Waviness may occur on the surface of the machined parts due to the table motion error and the dynamic cutting mechanism between the tool and the workpiece. The waviness may fall off the form accuracy of the precision machine parts. In the research, a micro cutting device with piezoelectric actuator has been developed to control precise depth of cut and compensate the waviness on the surface of the workpiece. Experiments have been carried out in the precision lathe. The characteristics of the surface profile and cause of the waviness profile have been analyzed and waviness profiles of some cause have been compared with those of experiments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1518-1521
• /
• 2005

The application of focused ion beam (FIB) technology in micro/nano machining has become increasingly popular. Its usage in micro/nano machining has advantages over contemporary photolithography or other micro/nano machining technologies such as small feature resolution, the ability to process without masks and being accommodating for a variety of materials and geometries This paper focus to apply the sputtering technology accumulated by experiments to 3d structure fabrication with high resolution. Therefore some verifications and discussions of the characteristics of FIB sputtering results according to focal length were described in this paper. And we suggested the definition of rectangular pattern profile and made the verifications of sputtering results based on definition of it.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.4
• /
• pp.316-333
• /
• 2005

Although some successful recognition algorithms have been developed, most of them did emphasize on extracting accurate interpretations without considerations of manufacturability. Evaluating the manufacturability for multiple features leads to produce the machining sequences. In this paper, the A* algorithm guarantees the optimal setup sequences with minimizing the machining cost. Also, tolerances including surface roughness are converted to STEP formats to be utilized for more reliable process plans. Finally, decision tables are used to create the detailed operational sequences based on geometric tolerances and surface roughness. Machining parameters such as feed, depth of cut, and cutting speed for each operation are added to the routing sheet. Windows are presented to show how the entire system works for a sample part.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.117-120
• /
• 1995

In this machining process, variation in cutting forces results in relative displacements between the tool and the workpiece leading to tool vibration. Also there is a demand to change the depth of cut very frequently. A soluion for both cases is to develop a system which has the ability to reposition a cutting tool to a very small level, i.e., micron. This ppaper presents the development of a micropositioning system (MPS) using a magnetostrictive material. The deveoped MPS is implemented to a lathe and subjected to static and machining test. The results show that the MPS has good potential for machining application

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2015

Productivity of machining using machine tools is affected by cutting conditions such as cutting speed, feedrate and depth. However, undesirable conditions that lengthen the machining cycle and shorten the tool life occur frequently because determination of cutting condition is known to depend on human experience. This paper presents a method of cycle reduction by removing undesirable conditions. For cycle reduction, maximum cutting load is determined using commercial FEM simulation code. The feedrate in the NC program is altered based on a predetermined cutting load value. To make a decision on the proposed effectiveness, a simulation is performed for the brake hub parts of an automobile. From the evaluation, it was found that the cycle reduction was under 15%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.55-61
• /
• 2015

In this paper, the grinding characteristics of internal thrust grinding were studied with vitreous CBN wheels using a machining center. Grinding experiments were performed according to grinding conditions, such as wheel feed speed and depth of cut, workpiece speed, and rate of grinding width. Additionally, the grinding force and grinding ratio were investigated though these experiments. Based on the experimental results, the grinding characteristics of internal thrust grinding were discussed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.36-43
• /
• 2003

In machining of ceramic materials, they are very difficult-to cut materials because of there high strength and hardness. Machining of ceramics are characterized by cracking and brittle fracture. Generally, ceramics are machined using conventional method such as finding and polishing. However these processes are generally costly and have low MRR(material removal rate). This paper focuses on determining the optimal levels of process parameters for products with CNC machining center. For this purpose, the optimization of cutting parameters is performed based on experimental design method. A design and analysis of experiments is conducted to study the effects of these parameters on the surface roughness by using the S/N ratio, analysis of ANOVA and F-test. Cutting parameters, namely, cutting speed, feed and depth of cut are optimized with consideration of the surface roughness.