• 대한소아치과학회지
• /
• 제31권4호
• /
• pp.569-578
• /
• 2004

본 연구는 유치열과 영구치열에서 구개의 길이, 폭, 깊이 및 치열궁의 형태 등을 조사하여 남녀간의 차이와 유치열과 영구치열간의 변화양상을 파악하는 것이다. 유치열기 아동 100명과 영구치열기 성인 100명 총 200명을 대상으로 하여 상악 석고 모형을 채득하고 3차원 laser scanner(SD Scanner, DS4060, LDI, U.S.A.)를 통한 석고 모델의 측정을 통해 cloud data, polygonization, section curve and loft surface, fit and horizontal plane (Surfacer 10.0. Imageware, U.S.A.)을 기초로 하여 구개의 폭, 길이, 높이 및 치열궁의 형태 등을 계측하였다. 통계학적 분석을 위해 t-tests가 사용되었다. 이에 다음과 같은 결론을 얻었다. 1. 구개의 계측항목에서 유치열 전방부 구개높이를 제외한 나머지 항목에서 남자가 여자보다 크게 나왔으며, 유치열은 전구개폭(p<0.05)과 후구개폭(p<0.01), 영구치열은 구개폭(p<0.05)과 전구개길이(p<0.01), 중구개, 후구개길이(p<0.05)에서 남녀간에 유의한 차이가 있었다. 2. 남녀의 구개지수에서 유치열에서는 구개장고지수(p<0.05)와 구개장폭지수(p<0.01)가 남녀간에 통계학적으로 유의한 차이가 있었다. 영구치열의 구개지수에서는 남녀간에 유의한 차이가 없었다. 3. 유치열과 영구치열의 계측항목 비교에서 후방부 구개폭이 가장 많이 증가하였으며, 다음으로 후방부 구개높이, 전방부 구개폭, 전방부 구개길이 순이었다. 전방부 구개높이와 후방부 구개길이는 오히려 감소하였다. 4. 유치열과 영구치열의 구개지수 비교에서 구개장고지수와 구개장폭지수, 후구개폭고지수는 영구치열에서 증가하였고, 나머지 지수는 감소하였다.보아 Er:YAG 레이저와 Chinese ink로 photosensitization을 시행한 후의 Nd:YAG 레이저 조사는 일정시간 동안 S. mutans의 증식과 산 생성능을 억제시키므로써 치아우식증 예방효과를 얻을 수 있다고 사료되나 억제효과가 오래가지 않아 임상적으로 효과를 얻기 위해서는 자주 조사를 해주어야 한다는 문제점을 안고 있어 임상적으로 치아우식증 예방이란 단독 목적으로 사용하기에는 실용성이 크지 않다고 사료된다.전자현미경 관찰에서 초음파 진동을 가한 군에서 resin tag의 길이가 길었고, lateral branch의 수도 많이 관찰되었다.TEX>$1\rightarrow6$ 결합이 주된 결합인 수용성 글루캔이었다. 이상의 결과를 종합하면 구강에서 분리된 Streptococcus salivarius 119에 의한 Streptococcus mutans의 인공치태 형성 억제작용은 수용성 글루캔 형성에 의한 것으로 사료되었다.동을 유도할 수 있다고 사료된다. 또한 이유식을 통한 다양한 식품의 경험 및 식품 섭취방법 등을 연습하는 과정을 통해 앞으로의 식생활 및 성장 발달에 영향을 미칠 것으로 사료된다. 따라서 영유아의 성장발달에 따른 적절한 영양교육의 실시가 보다 체계적으로 활성화 되어야 하겠으며 이를 위해 실제로 도움이 될 수 있는 구체적인 교육내용, 방법 및 도구의 개발이 요구된다.어서, B군은 A군,C군,D군과 비교하여 통계학적으로 유의성 있는 차이를 보였고(p<0.05), E군은 F군,G군과 비교하여 통계학적으로 유의성 있는 차이를 보였다(p<0.05). 3. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 예방효과가 있었다. 4. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 진행억제효과가 있었다. 5. 광중합형 및 자가중합형 교정용 전색제 표본에

• 한국전통조경학회지
• /
• 제38권3호
• /
• pp.25-34
• /
• 2020

본 연구는 국내 명승과 미국 국립공원을 대상으로 정의 및 주요 가치, 지정 절차 및 유형, 지정추이를 살펴보고 두 자연유산의 지정 특성을 분석한 결과 다음과 같은 결론을 도출하였다. 첫째, 명승은 경관성을 기본 전제로 학술적, 역사적, 인문적 가치를 포함하는 복합유산으로서의 성격을 지니고 있다. 미국 국립공원은 공공성을 기반으로 하는 자연유산으로서 경관의 보호를 통해 국민의 자연유산 향유에 기여하고 생태적·역사적 가치를 동시에 만족하는 것을 목표로 삼고 있다. 둘째, 명승의 지정은 소유자나 관리자, 지자체의 요청이나 문화재청장의 직권으로 지정신청과 지정조사를 거쳐 문화재 위원회의 심의를 통해 지정여부를 결정한다. 지정조사는 기초자원조사와 유형별 자원조사로 구분되며, 1970년 명주 청학동 소금강의 최초 명승 지정 이후 2000년대까지 명승 지정은 저조했으나 2006년 이후 명승 활성화 정책에 힘입어 지정건수가 급격히 증가했고, 자연명승과 역사문화명승의 비중이 균형을 이루게 되었다. 미국 국립공원은 의회나 대통령에 의해 지정이 결정되며 국립공원청에서는 사전검사조사를 통한 잠정자원의 특별자원연구 수행 여부 결정, 특별자원연구 결과에 따른 국립공원 지정기준 만족 여부, 우선순위 결정이 순차적으로 이루어진다. 미국 국립공원은 의회뿐만 아니라 대통령의 국립기념지 지정 권한 부여를 통해 국립공원의 지정경로가 확대되었고, 국립공원청의 통합 운영으로 여러 부처에서 관할하던 유산들이 국립공원에 포함되어 지정건수가 증가하였다. 또한 사적지법의 제정으로 역사유적이 다수 지정되고, 여가공간 제공을 위한 레크리에이션 지역들을 지정하여 총 18개 유닛으로 분류·관리하고 있다. 셋째, 명승과 미국 국립공원의 지정 특성을 비교한 결과 복합적 가치를 지닌 자연유산의 지정, 상호보완적 지정체계와 자원특성에 따른 유형분류, 주무부처 신설 및 지정 정책에 따른 유산의 균형화가 특징으로 확인되었다. 두 유산은 경관성과 공공성을 바탕으로 생태적, 역사적, 학술적 가치를 동시에 충족하는 복합적 자연유산의 특징을 지니고 있었다. 또한 양국 모두 기초자원조사와 심화단계의 지정조사를 통해 순차적, 상호보완적 조사로 유산의 지정을 심의하는 체계가 확인되었으며 자원의 특성에 따라 각 유형을 분류하였다. 이외에 국내 명승 활성화 정책과 미국의 국립공원청 통합운영은 두 유산의 지정 양상에 영향을 미쳤으며, 자연유산과 역사문화유산의 균형을 이루었다. 넷째, 명승과 국립공원의 자원유형과 보존관리 방식은 상당부분 연관성을 지니고 있었다. 미국 국립공원의 자연지역은 국내 천연기념물의 유형들이 주요 자원으로 포함되며, 자연명승과 유사한 특성을 지닌다. 또한 역사유적은 경관성 측면에서 역사문화명승의 지정기준과 유사하며, 전쟁 및 유명인물 관련 유적이 주를 이루는 양상이 사적의 유형과 관련있었다. 보존관리 측면에서 미국 국립공원의 자연지역은 생태계 원상을 그대로 두는 방식을 지니고 있으나 점적 자원에 대한 중점관리는 국내 자연유산 보호체계가 유용할 것으로 보인다. 한편, 역사자원은 사적과 역사문화명승이 전통시대 생활상 전반을 포함하고 있으나, 미국 국립공원의 역사유적은 전쟁사, 유명인 관련 유적을 대상으로 현대까지 시간적 범위를 설정하였으며, 현존 자원을 토대로 적극적인 향유 프로그램 제공이 차이점으로 도출되었다.

• 한국토양비료학회지
• /
• 제42권1호
• /
• pp.46-52
• /
• 2009

질소동위원소비(${\delta}^{15}N$)가 낮은 대기질소 강하물의 유입에 의해 산림 생태계 내 다양한 시료(나이테, 엽, 토양)의 ${\delta}^{15}N$ 값이 낮아지는 것으로 보고되고 있다. 하지만, 토양 미생물과 식물이 쉽게 이용할 수 있는 토양 무기태 질소의 ${\delta}^{15}N$에 대한 연구는 진행된 바 없다. 본 연구는 대기질소 강하물이 상대적으로 적은 농촌지역과 많은 공업지역에 위치한 적송 산림지역의 유기토양층과 무기토양층(0~20 cm와 20~40 cm) 중 $NH_4{^+}$과 $NO_3{^-}$의 ${\delta}^{15}N$값을 분석하여 두 지역간의 차이를 조사하였으며, 이들 ${\delta}^{15}N$ 값을 근거로 조사 지역의 질소손실 민감성을 평가하였다. 농촌지역과 공업지역에서 $NH_4{^+}$의 ${\delta}^{15}N$ 값은 각각 +8.9 ~ +24.8‰과 +4.4 ~ +13.8‰로 분포하였다.유기토양층과 무기토양층(0~20 cm)에서 두 지역간 $NH_4{^+}$의 ${\delta}^{15}N$값 차이가 나타났는데, 공업지역에서 각각4.4‰과 +13.8‰이었고, 농촌지역에서는 각각 +8.9‰과 +24.3‰로 공업지역에서 더 낮은 ${\delta}^{15}N$ 값이 나타났다.이는 공업지역에서 ${\delta}^{15}N$값이 낮은 대기 유래 $NH_4{^+}$ 유입량이 더 많았음을 의미한다. 한편, $NO_3{^-}$의 ${\delta}^{15}N$ 값은 지역간 차이가 없었는데, 이는 $NO_3{^-}$가 용탈과 탈질 등에 의해 쉽게 손실되는 과정에서 수반되는 질소동위원소 분할 효과에 의해 강하물에서 유래된 $NO_3{^-}$의 ${\delta}^{15}N$ 기여도가 낮아지기 때문으로 판단된다. 본 연구에서 관측된 무기태 질소의 ${\delta}^{15}N$ 값은 다른 지역에서 조사된 $NH_4{^+}$(-10.9 ~ +15.6‰)과 $NO_3{^-}$(14.8 ~ +5.6‰)의 ${\delta}^{15}N$ 값보다 매우 높은데, 이는 본 연구지역에서 토양 질소 손실 가능성이 높음을 보여준다. 이상의 연구 결과에 의하면 산림토양의 무기태 질소 중 $NO_3{^-}$보다 $NH_4{^+}$이 질소공급원(대기 질소 강하)에 대한 ${\delta}^{15}N$ 정보를 보다 잘 반영하는 것으로 판단된다.

• 동양고전연구
• /
• 제72호
• /
• pp.365-400
• /
• 2018

10천간 12지지를 합성한 60개의 서수부호(序數符號)로 각각의 연월일시를 표현하였던 간지(干支) 책력(冊曆)에서의 그 기호는, 동양의 전통 의학(醫學) 분야에서 발병과 치료에 영향을 미치는 요인의 표식으로 쓰였을 뿐만 아니라, 여러 술수(術數) 분야에서의 길흉화복(吉凶禍福) 예단 지표로도 사용되었다. 이 간지력(干支曆) 부호를 기준으로 삼은 많은 술수 이론들이 한대(漢代) 이전까지 상당부분 갖추어졌던 것에 반해, '그것이 그렇게 된' 근원적 원리에 대한 이후의 책력학적 논의는 찾아보기 어렵다. 세성(歲星)(목성)이 황도대의 12개 '자리[차(次)]' 중에서 어느 곳에 있는 것인지로 그 한 해의 연명(年名)이 정해지는 천체력 기년 방식에는, 크게 세성기년법(歲星紀年法) 태세기년법(太歲紀年法) 간지기년법(干支紀年法) 등이 있다. 태세기년법과 명칭만 다를 뿐 실제로는 동일한 기년법이라 할 수 있는 간지기년법에서는 다시 세 가지 이상의 방식이 존재하며, 그 중 하나가 한대(漢代) 이래로 현재까지 중국과 우리나라 등지에서 끊김 없이 사용되고 있는 것이다. 2018년 올해의 간지 연명이 무술(戊戌)이 된 것은 순전히 '우연'에 의한 것이었다. 따라서 본 논의에서 필자는, 연월일시의 간지 부호를 가지고 고유 이론들을 구성하는 각종 전통 술수 분야에서 이에 대한 자각의 필요성을 역설(力說)하였다. 만 12년에 조금 못 미치는 목성의 1주천(周天) 주기 때문에, 천여 년에 한 번씩 약 85년 동안만 '황도대에서의 세성(歲星) 위차(位次)'와 '12지지(地支) 부호(符號)의 연명(年名)'이 서로 부합되는 상황이 펼쳐지는데, 최근의 수십 년이 그 시기가 됨을 확인하였다. 아울러서 28수(宿)를 바라보는 적절한 방법에 대해서도 함께 논하였다. 간지 책력이 각종 술수는 물론 전통 의술의 이론적 기반과도 결부된 것이니 만큼, 고대(古代) 천체력(天體曆)의 근원적 이론에 대한 심도 있는 연구는, 동양 전통 학문과 문화의 계승 발전 차원에서도 결코 소홀히 넘길 수 없는 일이다.

• 한국토양비료학회지
• /
• 제2권1호
• /
• pp.53-68
• /
• 1969

생산력이 서로 다른 두 토양(土壤)에 유기물(有機物)을 첨가(添加)하여 근부(根部) 환경(環境)의 변화(變化)와 수도품종별(水稻品種別) 근(根)의 근부(根部) 환경(環境)에 대(對)한 반응(反應)을 육안(肉眼) 관찰(觀察)하고 양분흡수(養分吸收)를 조사(調査)하여 다음과 같은 결과(結果)를 얻었다. 1) 고위답토양(高位畓土壤)은 유기물(有機物)의 분해(分解)가 완만(緩慢)하며 분해평형점(分解平衡點)에서의 유기물(有機物) 함량(含量)이 높고 저위답토양(低位畓土壤)은 유기물(有機物)의 분해(分解)가 급속(急速)하며 분해평형점(分解平衡點)에 함량(含量)이 낮다. 2) 저위답토양(低位畓土壤)은 근(根)의 발육(發育)이 조해(阻害)되며 유기물(有機物) 첨가(添加)에 의(依)하여 더욱 조해(阻害)된다. 유기물(有機物)의 분해(分解)로 생기는 gas가 근(根) 주변(周邊)에 피막(被膜)을 형성(形成)하는데 기인(起因)하는것 같으며 이 결과(結果)로 T/R 값이 심히 떨어진다. 3) 품종간(品種間) 근부(根部) 환경(環境)에 반응력(反應力)이 현저하여 수원(水原) 82호(號)는 농림(農林) 25호(號) 보다 고위답(高位畓) 토양(土壤)에서는 흡수력(吸收力)이 강(强)하고 저위답토양(低位畓土壤)에서는 흡수력(吸收力)이 떨어진다. 4) 유기물(有機物) 첨가(添加)로 가리흡수(加里吸收)가 조해(阻害)되고 저위답토양(低位畓土壤)에서는 인산흡수(燐酸吸收)가 가장 조해(阻害)되는데 저위답토양(低位畓土壤)에 유기물(有機物)을 첨가(添加)하여 이 두 인자(因子)가 공역(共役)할 경우 양분흡수조해(養分吸收阻害)는 상승적(相乘的)으로 야기(惹起)된다. 5) 근(根)의 활력(活力)과 근수(根數), 지상부(地上部) 생육량(生育量) 및 근부생육량(根部生育量)과의 상관(相關)은 각각(各各) r=0.839, r=0.834, r=0.948로 모두 1%에서 유의성(有意性)이 있고 지상부(地上部)와 근부(根部)의 N.P.K. 흡수량(吸收量)과도 각각(各各), r=0.751, r=0.670, r=0.769, r=0.729, r=0.742, r=0.815로 5% 수준(水準)에서 유의성(有意性)이 있으며 근부(根部)의 생육량(生育量) 및 가리(加里)의 흡수량(吸收量)과의 상관계수(相關係數)가 가장 크다. 6) 근부환경(根部環境)이 나쁜곳에서는 좋은 곳에서보다 수도지상부(水稻地上部)의 질소농도(窒素濃度)는 낮고 근부(根部)는 훨씬 높아서 ammonia 과잉(過剩)의 해독(害毒)이 예상되며 인산(燐酸)과 가리(加里)는 양부위(兩部位)에서 모두 심히 낮으며 특히 간(稈)과 엽초(葉稍)에서 더욱 낮았다. 7) 근부환경(根部環境)이 나쁜 곳에서는 좋은곳에서보다 지상부(地上部)의 당(糖)과 전분(澱粉) 및 전탄수화물(全炭水化物) 함량(含量)이 높은데 반(反)하여 근부(根部)에서는 낮은데 환원당(還元糖)에서 더욱 심하여 근부(根部)에서는 당(糖)의 이상소모(異常消耗)가 예상되고 지상부(地上部)에서는 이에 대비하여 당(糖) 대사(代謝)가 해당방향(解糖方向)으로 주력(注力)함이 예상된다. 8) 근부환경(根部環境)이 나쁜곳에서는 근부(根部)에서 지상부(地上部)로 양분(養分)의 전류(轉流)가 극히 나빴다. 9) 근부환경(根部環境)이 나쁜곳에서는 황산(黃酸)의 함유율(含有率)이 높은데 엽신(葉身)에서 특히 높아 황산(黃酸) Ion에 의(依)한 ATP 생성(生成) 조해(阻害)가 예상되고 $P_2O_5/S$ 값은 고위답(高位畓) 유기물무시용구(有機物無施用區)의 1/5에 불과(不過)하여 P-S 비(比)가 관련된것 같다. 10) 근부환경(根部環境)이 나쁜곳에서는 지상부(地上部) 철(鐵)의 함량(含量)에는 차이(差異)가 없으나 Mn 함량(含量)은 상당히 적은 편이어서 $Fe/P_2O_5$ 값이 큰데 간(稈)과 엽초(葉稍)에서 7배(倍)나 되어 철인산(鐵燐酸) 침전에 의(依)한 통도(通導)의 기계적(機械的) 장해(障害)가 예상된다. 11) 토양중(土壤中) 조해성(阻害性) 인자(因子)는 유기물(有機物) 분해속도(分解速度)가 빠른 경우 악화(惡化)되어 근부기능기(根部機能基)를 조해(阻害)하여 양분(養分)을 조지(阻止)하고 체내(體內) Ion 평형(平衡)(N. P. K. S. Fe)을 교란(攪亂) 이상대사(異常代謝)(해당작용(解糖作用) A. T. P 생성약화(生成弱化))를 일으켜 전류(轉流)가 방해(防害)되고 따라서 각부위(各部位)의 생육(生育)의 불균형(不均衡)을 초래(招來)하는 연발생(連發生) 조해작용(阻害作用)이 순환가속(順換加速)하는 것으로 추정(推定)된다. 12) 고위답(高位畓)에서 질소(窒素)의 시용량(施用量)에 따른 근분포(根分布)를 조사(調査)한 결과(結果) 저위답(低位畓)은 표토부분(表土部分)에 분포(分布)하나 고위답(高位畓)에서는 심토(心土)에 분포비율(分布比率)이 많다. 질소(窒素) 무시용(無施用)은 지하(地下) 0~7cm 부위(部位)에 분포(分布) 비율(比率)이 크고 질소(窒素)를 시용(施用)하면 7~14cm 부위(部位)에 근분포(根分布) 비율(比率)이 많다. 전(全) 근중(根重)은 저위답(低位畓)에 비(比)하여 고위답(高位畓)에 많고 질소(窒素) 무시용(無施用)에 비(比)해서 질소(窒素) 10a 12kg 시용(施用)에서 많았다.

• Journal of Gastric Cancer
• /
• 제6권1호
• /
• pp.36-42
• /
• 2006

목적: 암의 발생과 진행에 있어서 비정상적인 세포주기로 인하여 조절이 불가능한 세포성장과 분열이 중요한 기전으로 관여한다. 세포주기는 cyclin, CDK와 cyclin의 복합체는 CDKI에 의해 억제된다. 세포주기를 억제하는 인자는 종양 세포에서도 종양억제인자로 작용한다. 세포 주기 조절인자 CDKI는 INK family, CIP/KIP family로 구분된다. 본 연구는 CIP/KIP family인 $p21^{Waf1/Cip1}\;27^{kip1}$ 단백질의 발현유무에 따른 위암의 임상조직학적인 특성 및 예후와 연관성에 대해 조사하였다. 대상 및 방법: 1993년부터 1997년까지 위암으로 진단받고 수술적 치료를 받은 환자들 중에 추적 조사가 가능하고 파라핀 포매 조직상태가 좋은 192명의 환자를 대상으로 하였다. $p21^{Waf1/Cip1}$과$p27^{kip1}$에 대해 면역조직화학염색을 시행하였고, 종양세포의 핵에 염색되는 세포를 양성 판정하였다. 통계학적 분석은 임상조직학적인 특성과 생존율의 차이에 대하여 시행하였다. 결과: $p21^{Waf1/Cip1}$은 15.6% (30/192), $p27^{kip1}$은 28.1% (54/192)의 발현율을 보였다. $p21^{Waf1/Cip1}$은 양성에서는 T1-2 (80.0%), 음성에서는 T3-4 (50.6%)가 차지하는 비율이 높았으며(P<0.05) 다른 인자에서는 통계적인 유의성이 없었다. $p27^{kip1}$에서는 T-stage에서 $p21^{Waf1/Cip1}$과 비슷한 결과(77.8%, 55.1%)를 보였으며, Lauren 분류에서는 장형(62.7%)보다 미만형(91.3%)에서 음성을 보이는 비율이 높았다.(P<0.05)$p27^{kip1}$도 다른 인자에서는 통계적인 유의성이 없었다. 의 상관관계는 $p21^{Waf1/Cip1}(+)$과 $p27^{kip1}$의 상관관계는 $p21^{Waf1/Cip1}(+)/p27^{kip1}(+)$ 보이는 경우(53.3%)와, $p21^{Waf1/Cip1}(-)/p27^{kip1}(-)$ 보이는 경우(76.5%)가 많았다(P<0.05). $p21^{Waf1/Cip1}$과 $p27^{kip1}$ 복합 검사에서는 $p21^{Waf1/Cip1}(+)/p27^{kip1}(+)$인 경우에 T1-2 (87.5%)가 많았고 $p21^{Waf1/Cip1}(-)/p27^{kip1}(-)$인 경우에는 T3-4(58.1%)가 많았다(P<0.05). 또한 Lauren 분류에서는 $p21^{Waf1/Cip1}(+)/p27^{kip1}$인 경우가 장형 (100%)에서만 나타났으며(P<0.05), $p21^{Waf1/Cip1}(-)/p27^{kip1}(-)$인 경우는 미만형인 경우(87.0%)가 장형(54.9%)의 경우보다 많은 비율을 차지하였다(P<0.05). 5년 장기 생존율에 있어서는 각각의 $p21^{Waf1/Cip1}$과$p27^{kip1}$의 발현 유무에 따른 통계적인 유의성은 없었고 복합 검사에서도 $p21^{Waf1/Cip1}(+)/p27^{kip1}(+)$의 경우에 생존율이 높았지만 통계적인 유의성은 없었다. 결론: 저자들의 경우에는 $p21^{Waf1/Cip1}$과$p27^{kip1}$은 서로 비슷한 발현 형태를 나타내고 $p21^{Waf1/Cip1}$과$p27^{kip1}$의 발현은 침윤 정도에 영향을 주며, $p27^{kip1}$의 경우에는 Lauren분류와 관련성이 있었다. 또한, $p21^{Waf1/Cip1}$과$p27^{kip1}$ 복합 검사는 침윤 정도와 Lauren 분류와 연관성이 있다고 할 수 있다. 하지만, $p21^{Waf1/Cip1}$과$p27^{kip1}$의 발현에 따른 생존율의 차이가 유의성을 보이지 않아, 예후 예측인자로의 적용은 한계가 있다고 생각한다.

• 대순사상논총
• /
• 제27집
• /
• pp.171-200
• /
• 2016

이 글은 전통 효(Filial Piety) 윤리와 대순진리회(Daesoonjinrihoe)의 효 윤리를 비교의 지평에서 분석한 것이다. 그동안 한국의 전통 효 윤리는 현대와 맞지 않는다는 이유로 변화를 요구받아 왔고, 그 핵심은 부모와 자식 간의 관계가 수직적·일방적인 게 아닌 수평적·상호 호혜적이어야 한다는 것이었다. 하지만 이에 대한 구체적인 이념과 대안에 대한 깊이 있는 연구는 거의 없었다. 이런 측면에서 한국의 대표적인 민족종교인 대순진리회가 근대화 이후에 전통과 현대의 충돌을 경험하면서 성장해 왔다는 점을 감안하면, 그 교리체계에서 효 윤리가 어떻게 구축되어 있는지를 관찰하는 작업은 전통 효가 현대적 감각에 맞게 어떻게 윤색될 수 있는지를 살피게 하는 하나의 좋은 사례를 제공해줄 수 있으리라 본다. 이것을 요약하면, 첫째, 유교와 대순진리회는 봉친(奉親)을 효 윤리로 삼지만, 유교는 가부장적인 봉건성에 입각하여 아랫사람의 일방적·맹목적 희생을 강조하고, 대순진리회는 어느 한쪽의 일방적인 희생을 지양하며 부모와 자식 사이의 상생(mutual beneficence)을 도모하고 있다. 이러한 차이는 유교적 효가 봉건질서를 추구하는 이념 속에서, 대순진리회 효가 새로운 종교적 세계인 후천 신세계의 원리인 보은상생과 인존(Respect For Man)의 이념 속에서 구축된 결과로 나타난 것이다. 둘째, 불교와 도교의 효는 부모 생전에 수복(壽福)을 누릴 것을 기원하고 사후에는 천도를 위해 발원하는 소극적·수동적인 것이다. 대순진리회의 효 역시 그러한 관념을 일부 포함하지만, 거기에 그치지 않고 부모 스스로가 죄를 벗고 앞길을 닦아나가도록 유도하는 것까지 효의 범주를 더 넓게 잡는다. 부모와 자식의 수행을 동시에 요구하는 이런 효 윤리는, 자식이 수행 끝에 종교적 목표를 이룬 연후 받게 되는 복록을 부모도 동시에 누릴 수 있게 하고자 하는 대순진리회 세계관 때문에 성립된다. 셋째, 유교와 대순진리회는 선령향화를 효 윤리로 삼지만, 무속적 사고를 배제한 본래 유교(성리학)적 세계관 속의 효는 향화의 대상을 비인격적 존재로, 대순진리회는 인격적 존재로 상정한다. 따라서 유교에 비해 대순진리회의 선령향화는 관념에 치우치지 않는다는 점에서 보다 현실적이다. 넷째, 유교와 대순진리회는 모두 조상들의 은혜를 갚고자 하나 그 은혜의 내용과 보은에 차이가 있다. 유교에서는 조상들이 생명을 준 존재이기에 그에 대한 감사로써 향화를 올리는 것만으로 효가 성립되지만, 대순진리회에서는 조상신들이 자손의 도성덕립을 목적으로 60년 적공(積功)으로써 생명을 주면서 동시에 수도를 하도록 독려하는 존재로 설정되어 있기 때문에 향화를 올리는 것과 더불어 수도까지 해야 효가 성립된다. 다섯째, 유교에서는 세속에서의 출세를 의미하는 입신양명이 효이지만, 대순진리회에서는 그 보다는 수도를 성공시켜 종교적 목표를 달성시키는 것이 더 큰 효로 규정된다. 여섯째, 유불도는 모두 도덕에 기반한 가족윤리로 효를 규정한다. 대순진리회 역시 그러하지만, 그 외에도 효에 종교적 구원을 위한 필수 윤리라는 위상을 더 부여한다. 왜냐하면 효의 부재는 세상을 병들게 하고 멸망케 하는 직접적인 원인이면서, 동시에 60년 동안 적공(積功)을 한 조상신들과 직접적으로 생명을 준 부모들의 은혜를 저버리는 배은이 개벽시대에는 용납되지 않는다고 보기 때문이다. 이러한 사실들로부터, 대순진리회는 자신의 독특한 사상을 바탕으로 하여 유불도의 전통 효 윤리들을 일부는 수용하고 일부는 재해석과 재창조 과정을 거쳐 윤색해 두고 있음을 살필 수 있다. 즉 대순진리회의 효는 인간 존중의 이념, 구체적으로는 보은상생과 인존(Respect For Man)사상 위에서 정립된 윤리 규정이며, 인격 완성과 도통이라는 종교적 목표에 도달하기 위한 나 자신의 수행이자 복록을 더불어 누리기 위한 부모의 일정한 수행까지 요구하는 개념으로 이해되고, 개벽시대에 구원을 받기 위한 필수 윤리라는 대단히 강화된 종교적 색채를 띠고 있는 것이라고 크게 그려 볼 수 있다는 말이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 미술자료
• /
• 제96권
• /
• pp.239-260
• /
• 2019

본 논고는 19세기 이후 형성된 서화(書畫)의 유통과 확산의 양상을 당시 활발히 제작된 장식병풍 중 하나인 <백선도(百扇圖)>의 예를 통해 살펴본 글이다. 백선도는 화면에 다양한 형태의 부채를 겹쳐서 배치하고 각각의 선면(扇面) 안에 여러 종류의 화제(畫題)를 그린 것을 말한다. 부채와 선면화(扇面畫)라는 소재는 이전부터 존재하였지만 장식용 회화의 소재로 등장한 것은 19세기 이후로, 호사취미 경향을 반영하여 주로 병풍(屛風)으로 활발히 제작되었다. 지난 2016년 국립중앙박물관 특별전 '미술 속 도시, 도시 속 미술'에서 독일로텐바움세계문화예술박물관 소장 <백선도>가 새로이 소개된 바 있다. 6폭으로 구성된 이 병풍에는 한 폭 당 5개 이상의 다양한 종류의 부채들이 등장하고 각 부채 면에는 단순히 채색한 것 뿐 아니라 다양한 화목(畫目)의 그림들이 남아있다. 무엇보다 이 작품을 주목해야 하는 것은 국립중앙박물관에 동일한 초본(草本)이 전하고 있기 때문이다. 19세기에 들어서면서 이전의 왕실이나 사대부들이 사적인 공간에서 향유하였던 서화(書畫)는 민간으로 확산되었고 시장을 통한 유통의 단계로 넓어졌다. 집안을 꾸미고 장식하는 풍조에 따라 화려한 장식그림들이 선호되었고, 한 폭에 다양한 형태의 화면과 다채로운 畫目(화목)의 그림을 그려 완성하는 백납도병풍 제작이 성행하였다. 로텐바움박물관 소장 한국 컬렉션의 상당수는 독일 주재 조선국 총영사이자 독일의 사업가였던 하인리히 콘스탄틴 에두아르 마이어(Heinrich Constantin Eduard Meyer, 1841~1926)의 수집품이다. 그는 1890년대 후반부터 1905년까지 조선과 독일을 오가며 다양한 유물들을 수집하여 독일에 돌아가 1909년까지 순차적으로 수집품을 로텐바움박물관에 전달하였으며, <백선도>도 그 중 하나이다. 새롭고 장식미가 돋보이는 <백선도>는 조선에 들어와 있던 외국인들의 이목을 집중시키기에 충분했을 것이다. 로텐바움박물관 소장 <백납도>는 제2폭의 뒷면에 "동현(銅峴)"이라는 지명이 적힌 종이조각이 거꾸로 붙어있어 흥미를 끈다. 동현은 지금의 서울 을지로 1가와 을지로2가 사이에 위치했던 곳이며, 조선시대에는 도화서(圖畫署)를 비롯한 혜민서(惠民署)·장악원(掌樂院) 등의 관청과 시전(市廛)이 있어 가내수공업이 성하던 지역이었다. 실제로 1900년대 초 이곳에는 서화를 유통하는 상점들이 자리잡고 있었기 때문에, 마이어가 수집했던 서화들의 구입처가 동현에 위치했었을 가능성은 매우 높다고 하겠다. 로텐바움박물관 소장 <백선도>는 총 6폭의 병풍으로, 1980년대에 한국 서화 소장품들을 수리하는 과정에서 현재의 모습을 갖춘 것으로 보인다. 국립중앙박물관 소장 <백선도 초본>은 1945년부터 1950년 사이 국립민족박물관에 입수된 작품이다. <백선도 초본>은 총 7점으로, 7점 중 6면 화면의 여백에 화면의 순서까지 정해져 있어 본래 총 8폭 병풍용 초본임을 알 수 있다. 한 화면에는 5개 이상의 다양한 접선(摺扇)과 단선(團扇)들이 배열해있는데, 작은 장식에서부터 부챗살의 문양까지 초본부터 사실적으로 묘사되었음을 볼 수 있다. 여기에 '석간주(石間朱)', '홍(紅)', '묵(墨)', '청(靑)' 등과 같이 부채에 들어갈 색 대부분을 지정하고, 빈 부채에는 '유(油)'라고 적거나 비워두었으며 이 중 10개의 부채에는 화훼초충도(花卉草蟲圖)나 고사인물도의 밑그림이 남아있다. 이를 실제 로텐바움박물관 소장 <백선도>와 비교하면 화면의 크기와 비례까지 정확하게 일치하고 있어, 초본의 매뉴얼을 그대로 따르고 있음을 보여준다. 이 작품의 펼쳐진 부채 면에는 산수, 고사인물, 화조, 영모, 초충, 어해 등 다양한 장르의 그림이 그려져 있는데 화접도(花蝶圖)나 어해도(魚蟹圖) 등은 19세기 유행하였던 소재로 당시 화단의 경향을 잘 보여준다. 이 작품에서 주목할 것은 김홍도(金弘道)의 전형적인 화풍을 연상시키는 장면들이 다수 포함되어 있다는 점이다. 이는 지금까지 알려진 백선도나 백납도에서는 찾아보기 어려운 특징이다. 서원아집도(西園雅集圖)는 상대적으로 제한된 작은 화면에 그려야 하는 백납도나 백선도의 특성상 잘 다루지 않는 소재로, 국립중앙박물관 소장 김홍도의 <서원아집도>병풍과 화면의 구성이나 화풍 모두 매우 흡사하다. 더구나 <백선도>병풍의 몇몇 장면은 김홍도의 작품 중에서도 1796년작 《병진년화첩(丙辰年畫帖)》과 유사한 화면들을 다수 발견할 수 있어 흥미롭다. <사인암(舍人巖)>과 흡사한 산수도(山水圖)를 비롯하여 <서원아집도>, <쌍치도(雙雉圖)> 등에서 김홍도 화풍을 연상시킨다. 따라서 부채 속 그림을 그린 인물은 김홍도 화풍의 영향을 받은 직업화가일 것으로 보이며, 작가는 《병진년화첩》을 직접 감상한 적이 있거나, 서화시장에 《병진년화첩》을 베껴 그린 부본(副本)이 유통되었을 가능성이 매우 높다. 현재까지 알려진 병풍으로 된 백선도는 10점 내외인 것으로 파악되며, 이 작품들을 비교해보면 화면의 구성이 부채 1개 정도 차이가 있거나 비례와 좌우가 바뀌었을 뿐 화면구성이 매우 유사함을 찾아볼 수 있다. 이처럼 일정한 패턴의 화면구성은 같은 시기 민간에서 성행한 책가도(冊架圖)에서도 찾아볼 수 있는 특징으로, 19세기 서화의 수요층이 넓어짐에 따라 세밀한 표현과 화려한 장식성이 요구되는 회화들의 대량 제작을 위한 초본이 존재했음을 보여준다. 특히 도안이 복잡하여 범본이 필요한 곽분양행락도나 요지연도, 백동자도, 해학반도도 등의 규모가 큰 장식병풍에서 적극 활용되었으며, 실제 남아있는 작품에서 몇 가지의 도상들이 반복하여 등장하고 있어 초본을 참고했던 흔적을 찾아볼 수 있다. 시장의 수요에 맞추어 대량 제작할 수 있는 초본 활용이 성행했던 당시의 경향은 화면을 다채로운 부채들로 채우고 그 부채 면에 각기 다른 그림을 그려야하는 백선도 제작에 있어서도, 초본을 요긴하게 사용했음을 보여준다. 더구나 테두리를 그은 후 다양한 화목의 그림을 담는 백납도에 비해 백선도는 다양한 형태의 부채들을 먼저 그려야하는 공정을 거쳐야 했기 때문에, 대량 제작이 어렵고 그만큼 남아있는 작품이 상대적으로 적은 원인으로 생각된다. 이처럼 로텐바움박물관 소장 <백선도> 병풍과 국립중앙박물관 <백선도 초본>은 새로운 화풍이 수용되어 시도되었던 조선 말기 화단의 경향을 잘 보여주는 예라 하겠다. 다수의 백선도들이 박기준의 작품과 유사한 화풍과 화면 구성 보이는 것에 비해, 김홍도의 영향이 분명히 드러나는 매우 이례적인 예라는 점에서 앞으로도 더욱 심층적인 분석이 요구되는 작품이다.