• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제44권2호
• /
• pp.59-65
• /
• 2018

Objectives: This study aimed to optimize the thread depth and pitch of a recently designed dental implant to provide uniform stress distribution by means of a response surface optimization method available in finite element (FE) software. The sensitivity of simulation to different mechanical parameters was also evaluated. Materials and Methods: A three-dimensional model of a tapered dental implant with micro-threads in the upper area and V-shaped threads in the rest of the body was modeled and analyzed using finite element analysis (FEA). An axial load of 100 N was applied to the top of the implants. The model was optimized for thread depth and pitch to determine the optimal stress distribution. In this analysis, micro-threads had 0.25 to 0.3 mm depth and 0.27 to 0.33 mm pitch, and V-shaped threads had 0.405 to 0.495 mm depth and 0.66 to 0.8 mm pitch. Results: The optimized depth and pitch were 0.307 and 0.286 mm for micro-threads and 0.405 and 0.808 mm for V-shaped threads, respectively. In this design, the most effective parameters on stress distribution were the depth and pitch of the micro-threads based on sensitivity analysis results. Conclusion: Based on the results of this study, the optimal implant design has micro-threads with 0.307 and 0.286 mm depth and pitch, respectively, in the upper area and V-shaped threads with 0.405 and 0.808 mm depth and pitch in the rest of the body. These results indicate that micro-thread parameters have a greater effect on stress and strain values.

• 설비공학논문집
• /
• 제18권2호
• /
• pp.129-136
• /
• 2006

Optimal design of an air-to-liquid finned plate heat exchanger is considered theoretically in this study. Based on existing correlations for the pressure loss and the heat transfer in channel flows, the optimal configuration of the plate heat exchanger including the optimal plate pitch and the optimal fin pitch is obtained to maximize the heat transfer within the limit of the pressure drop for a given flow depth of the plate heat exchanger. It is found that the optimal fin pitch is about one ninth of the optimal plate pitch. In the optimal configuration, the flow and thermal condition in the channels is just at the boundary between the laminar developing and laminar fully developed states. It is also found when reducing the flow depth of plate heat exchangers for compactness, the heat transfer performance can be maintained exactly the same if the geometric parameters such as the plate thickness, plate pitch, fin thickness, and fin pitch are reduced proportional to the square root of the flow depth as long as the flow keeps laminar within the heat exchangers.

• Journal of Biosystems Engineering
• /
• 제9권2호
• /
• pp.27-36
• /
• 1984

This study was carried out to investigate the effects of the tilling depth, tilling travel speed and soil shear stress on the tilling load characteristics and power requirement for rotary tillers. The results obtained from the study are summarized as follows. 1. The average and maximum PTO torque increased as the tilling depth, tilling pitch and soil shear stress increased. A multiple linear regression equation to estimate the average PTO torque in terms of the above parameters was developed. 2. The ratios of maximum PTO torque to the average torque were in the range of 1.17 to 1.65 for the various tilling conditions tested. The variation in PTO torque increased greatly as the tilling pitch and soil shear stress increased, but decreased as the tilling depth increased. 3. Power requirement for the PTO shaft increased with the tilling depth, travel speed and soil shear stress, but decreased slightly as the tilling pitch increased. A multiple linear regression equation to estimate power requirement for the PTO shaft in terms of the above parameters was developed. 4. The specific power requirement for the rotary tiller was in the range of $0.008-0.015ps/cm^2$ for the various tilling conditons tested. The specific tilling capacity decreased as the tilling depth and soil shear stress increased, but increased with the tilling pitch. A multiple linear regression equation to estimate the specific tilling capacity in terms of the above parameters was developed.

• Tribology and Lubricants
• /
• 제16권4호
• /
• pp.247-252
• /
• 2000

As the demand for higher areal recording densities requires a lower flying height of the slider, the variation of the flying height of the slider during drive operation becomes of great concern. The variation of the flying height is closely related with the slider design parameters such as air bearing shape, cavity depth, shallow step depth, crown, camber, pitch offset, roll offset, gram load, and so on. The objective of this work is to optimize the cavity depth and the shallow step depth, which are the control factors in air bearing design, using Robust Design method. It was found that the shallow step depth was statistically significant in affecting the variation of flying height, therefore the level of the shallow step depth should be chosen to minimize the variation of flying height.

• Nuclear Engineering and Technology
• /
• 제40권5호
• /
• pp.429-438
• /
• 2008

The objective of the present study is the depth and layout optimizations of a single layer, high level radioactive waste repository in a discontinuous rock mass with special joint set arrangements. A single layer repository model, considering variations in the repository depths, pitches, and tunnel spacings, is used to analyze the thermomechanical interaction behavior. It is assumed that the repository is constructed in saturated granite with joints; the PWR spent fuel in a disposal canister is installed in a deposition drift which is then sealed with compacted bentonite; and the backfill material is filled in the repository tunnel. The decay heat generated by the high level radioactive wastes governs the thermomechanical behavior of the near field rock mass of the repository. The temperature and displacement behavior of the repository is influenced more by the pitch variations than the tunnel spacing and repository depth. However, the stress behavior is influenced more by the repository depth variations than the pitch and tunnel spacing. For the final selection of the tunnel spacing, pitch, and repository depth, other aspects such as the nuclide migration through a groundwater flow path, construction costs, operation costs, and so on should be considered.

• 디자인학연구
• /
• 제13권4호
• /
• pp.77-83
• /
• 2000

본 연구에서는 표면의 거칠기를 나타내는 척도인 요철의 깊이와 피치(pitch)의 변화에 따라 피실험자들이 느끼는 거칠기의 정도를 세 가지의 실험을 통하여 알아보았다. 첫 번째 실험은 임의로 나열해 놓은 샘플들을 거칠기의 정도에 따라 순서대로 나열하도록 하는 실험이었는데, 작업을 수행하는데 소요된 시간을 척도로 하여 분석을 수행하였다. 두 번째 실험은 임의로 나열해 놓은 샘플들을 표면 거칠기가 같다고 느끼는 샘플들끼리 그룹핑하는 실험이었다. 이 실험 결과의 분석에서는 그룹핑된 그룹의 개수에 의하여 분석을 수행하였다. 그리고 마지막 실험에서는 각각 독립적으로 제시되는 샘플들을 만져보고, 그 샘플들의 거칠기 정도가 어떠한지 형용사 척도를 토대로 평가하는 실험이었다. 이상의 실험적 연구를 통하여, 요철의 깊이와 피치 모두 사용자들이 느끼는 거칠기의 정도에 유의한 영향을 주는 것을 알 수 있었으며 특히, 요철의 깊이와 거칠기의 상관관계가 피치와 거칠기의 상관관계보다 훨씬 강한 것을 알 수 있었다. 즉, 사용자들은 요철의 깊이 변화에 대해 거칠기의 정도 차이를 더 많이 느낀다는 것을 알 수 있었다. 본 연구의 결과는 촉각을 이용한 사용자 인터페이스 디자인에서 촉각에 의한 식별력을 높이기 위하여 반드시 고려되어야 할 것이고, 그러한 사용자 특성이 반영될 때 제품의 사용 편의성은 더욱 증대될 수 있을 것이다.

• 제어로봇시스템학회논문지
• /
• 제18권1호
• /
• pp.42-46
• /
• 2012

A simple and accurate depth estimation algorithm for an IBVS (Image-Based Visual Servoing) is presented. Specifically, this algorithm is useful for under-actuated systems such as visual-guided quadrotor UAVs (Unmanned Aerial Vehicles). Since the image of a marker changes with changing pitch and roll angles of quadrotor, it is difficult to estimate depth. The proposed algorithm compensates a shape of the marker, so that the system acquire more accurate depth information without complicated processes. Also, the roll and pitch channels are decoupled so that the IBVS algorithm can be used in an under-actuated quadrotor system.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.148-155
• /
• 2003

In this paper, based on the concept of solid particles' hovering problem the working formula for the channel design of a Decanter-type centrifuge were derived. The Shields' diagram and its curve-fitting formula were used in determining the criterion of particle size for the sediment. By using these formula the designer can determine the sectional configuration of the channel, such as the liquid depth, the normal pitch of the screw-blade arrangement and the bowl diameter.

• 대한조선학회논문집
• /
• 제43권6호
• /
• pp.647-655
• /
• 2006

In this paper, submerged body dynamics model in vertical plane which can include the effect of free surface and wave is suggested to simulate the motions of submerged body moving beneath free surface precisely. A controller is designed, which can maintain a constant depth below the mean sea level and minimize the pitch angle. Numerical simulations show that the designed controller is effective on depth keeping and minimizing pitch angle in regular waves and irregular waves.

• 대한조선학회지
• /
• 제12권2호
• /
• pp.59-66
• /
• 1975

Recently, as the dimensions of energy carriers increase, especially in draft, a reliable prediction of the ship motions at finite depths of water becomes necessary. The purpose of this paper is to probe the effect of finite water depth on the hydrodynamic forces and ship motions, particularly heave and pitch, in longitudinal regular head waves, by comparing the experimental value of Freakes and Keay with the author's theoretical value obtained by applying the modified strip theory to the Mariner class ship. It is confirmed that generally the hydrodynamic coefficients in the equations of motion increase with decreasing water depth, and the wave exciting forces and moments decrease with decreasing water depth. Amplitudes of heave and pitch in longitudinal regular head waves decrease as the water depth in the range where the length of the incident wave is comparatively long. The effects of Froude Number on the hydrodynamic coefficients increase with decreasing water depth and is more noticeable in the case of heave than pitch. In heave, generally the discrepancy between the experimental value and the theoretical value is relatively small in the case of $F_n=O$, but it is very large in the case of $F_n=0.2$. It is considered that the trend stems from the ignorance of the three dimensional effect and the other effects due to shallowness of water on the hydrodynamic coefficients in the theoretical calculation. An extension of methods for calculating the two dimensional hydrodynamic forces to included the effect of forward speed should be recommended. It is required that more experimental works in finite water depths will be carried out for correlation studies between the theoretical calculation, according tp modified strip theory, and model experiments.