• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.24-35
• /
• 1999

This study was carried out to investigate the changes of surface characteristics of polyester fabrics on the deposition and the removal of oily soils from polyester fabrics in detergency, The relations between the removal of soil and the changes of surface properties of polyester fabrics treated with water- and oil-repellent agents were discussed before and after various wash cycles. Two kinds of fluoropolymers were selected as water-and oil-repellent finishing agents. The effects of water- and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respect to contact angle and wicking time. The treatment of polyester fabrics with fluoropolymers improved efficiently water repellency, oil repellency, contact angle and wicking time. But those properties were greatly decreased after 3 times of wash cycles in detergency The deposition of oily soils on the untreated fabrics was drastically increased with increasing of wash cycles. The deposition and the removal of oily soils from fabrics treated with fluoropolymer having hydrophobic components were very low after various wash cycles. The deposition and the removal of oily soils on the fabrics treated with fluoropolymer having hydrophilic components were high comparatively after various wash cycles. Even though the surface properties of treated fabrics were greatly decreased with the increasing of wash cycles, the remains of oily soils on the fabrics were lower than those of untreated fabrics in various wash cycles. But the remains of soils were drastically increased after 10 times of wash cycles in any cases.

• 한국재료학회지
• /
• 제23권8호
• /
• pp.405-422
• /
• 2013

Atomic layer deposition(ALD) is a promising deposition method and has been studied and used in many different areas, such as displays, semiconductors, batteries, and solar cells. This method, which is based on a self-limiting growth mechanism, facilitates precise control of film thickness at an atomic level and enables deposition on large and three dimensionally complex surfaces. For instance, ALD technology is very useful for 3D and high aspect ratio structures such as dynamic random access memory(DRAM) and other non-volatile memories(NVMs). In addition, a variety of materials can be deposited using ALD, oxides, nitrides, sulfides, metals, and so on. In conventional ALD, the source and reactant are pulsed into the reaction chamber alternately, one at a time, separated by purging or evacuation periods. Thermal ALD and metal organic ALD are also used, but these have their own advantages and disadvantages. Furthermore, plasma-enhanced ALD has come into the spotlight because it has more freedom in processing conditions; it uses highly reactive radicals and ions and for a wider range of material properties than the conventional thermal ALD, which uses $H_2O$ and $O_3$ as an oxygen reactant. However, the throughput is still a challenge for a current time divided ALD system. Therefore, a new concept of ALD, fast ALD or spatial ALD, which separate half-reactions spatially, has been extensively under development. In this paper, we reviewed these various kinds of ALD equipment, possible materials using ALD, and recent ALD research applications mainly focused on materials required in microelectronics.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.108-115
• /
• 2018

In bone tissue engineering, polycaprolactone (PCL) is one of the most widely used biomaterials to manufacture scaffolds as a synthetic polymer with biodegradability and biocompatibility. The polymer deposition system (PDS) with four axis heads, which can dispense bio-polymers, has been used in scaffold fabrication for tissue engineering applications. A dual-head deposition technology of PDS is an effective technique to fabricate 3D scaffolds. The electrospinning technology has been widely used to fabricate porous and highly interconnected polymer fibers. Thus, PDS can fabricate nanofiber-combined hybrid scaffolds using fused deposition modeling (FDM) and electrospinning methods. This study aims to fabricate nanofiber-combined scaffolds with uniform nanofibers using PDS. The PCL nanofibers were fabricated and evaluated according to the fabrication process parameters. PCL nanofibers were successfully fabricated when the applied voltage, tip-to-collector distance, flow rate, and solution concentration were 5 kV, 1 cm, 0.1 ml/h, and 8 wt%, respectively. The cell proliferation was evaluated according to the electrospinning time. Scanning electron microscopy was used to acquire images of the cross-sectioned hybrid scaffolds. The cell proliferation test of the PCL and nanofiber-combined hybrid scaffolds was performed using a CCK-8 assay according to the electrospinning time. The result of in-vitro cell proliferation using osteosarcoma MG-63 cells shows that the hybrid scaffold has good potential for bone regeneration.

• Restorative Dentistry and Endodontics
• /
• 제6권1호
• /
• pp.7-16
• /
• 1980

The author observed the periodontal tissue reactions to the root canal sealers after root perforations were made intentionally in dogs. The perforations were made on 74 teeth from 7 dogs. The experiments were performed in two different modes of procedure: In Group I, the perforations were made through the root canal to the alveolar bone. In Group II, the perforations were made from site of alveolar bone to the root canals. The perforated canals in Group I were filled with gutta-percha and root canal cements; Calxyl (Calcium Hydroxide in Ringer's solution), Zinc Oxide -Eugenol cement (Z.O.E.), Kerr sealer (Rickert's paste) and AH 26 (Epoxy Resin preparations). The perforated canals in Group II were sealed with Calxyl, Z.O.E, Kerr sealer and AH26. Histologic examinations of periodontal tissue reactions were observed at various time intervals. The results were as follows; l. Cementum deposition on the perforated root surface in Group II cases showed slightly earlier than that of Group I. Healing tendency of injured alveolar bone in Group II was greater than that of Group I. 2. According to the time increase after experiment, the cementum deposition on the site of perforated dentin in Group II with intact pulp was notably thickened. Secondary dentin deposition on the root canal surface where the dentinal tubles were cut was also found in similar pattern. 3. In the cases of perforated canals sealed with Calxyl both in Group I and Group II, It revealed the earliest cementum-deposition among 4 different root canal cements. In the cases of perforated canals sealed with Kerr sealer and AH26, the cementum-deposition on the root surface was not found. 4. Proliferation of epithelium around the perforated area was first seen at 5-week cases in Group I, and at 3-week cases in Group II. 5. In all cases, dentin resorption on the site of perforated root surface was always occured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1425_1426
• /
• 2009

In this study, commercially available polyethylene terephthalate(PET), which is widely used as a substrate of flexible electronic devices, was modified by dielectric barrier discharge(DBD) method in an air condition at atmospheric pressure, and aluminium - doped zinc oxide (ZnO:Al) transparent conducting film was deposited on PET substrate by r. f. magnetron sputtering method. Surface analysis and characterization of the plasma-treated PET substrate was carried out using contact angle measurements, X-ray Photoelectron Spectroscopy(XPS) and Atomic Force Microscopy (AFM). Especially the effect of surface state of PET substrate on some important properties of ZnO:Al transparent conducting film such as electrical and morphological properties and deposition rate of the film, was studied experimentally. The results showed that the contact angle of water on PET film was reduced significantly from $62^{\circ}$ to $43^{\circ}$ by DBD surface treatment at 20 min. of treatment time. The plasma treatment also improved the deposition rate and electrical properties. The deposition rate was increased almost linearly with surface treatment time. The lowest electrical resistivity as low as $4.97{\times}10^{-3}[\Omega-cm]$ and the highest deposition rate of 234[${\AA}m$/min] were obtained in ZnO:Al film with surface treatment time of 5min. and 20min., respectively.

• 한국진공학회지
• /
• 제8권1호
• /
• pp.51-54
• /
• 1999

Ar기 처리를 하면서 수소화된 비정질 실리콘(a-Si:H) 박막을 제작하였다. 연속증착할 때의 deposition rate는 1.9 /s 이었으며, Ar기 처리시간을 0.5분, 1분으로 증가시키면 2.8 $\AA$/s, 3.3 $\AA$/s 로 증가하였다. Ar기 처리시간이 2분, 3분일 때는 3.3 $\AA$/s 로 일정하였다. Ar기 처리시간을 증가시키면 광학적 밴드 갭과 박막내의 수소량이 증가하다가 약간 감소하는 경향을 보였다. Ar기 처리한 a-Si:H 박막도 Staebler-Wronski 효과를 보였으나, 연속증착된 a-Si:H 보다 광열화 현상이 많이 감소하였다. 1시간의 빛조사에 의하여 연속증착된 a-Si:H 박막의 경우, 상온에서의 전기전도도와 전기전도도 활성화에너지(Ea)는 각각 1/25배, 0.09eV 증가하였다. Ar기 처리를 한 경우, 상온에서의 전기전도도는 1/3배, Ea는 0.03eV 증가하였다. Ar기 처리를 함으로서 a-Si:H 박막의 빛에 대한 안정성을 향상시킬 수 있었으며, 안정성향상에 관한 미시적 과정을 논의하였다.

• 한국결정학회지
• /
• 제6권1호
• /
• pp.14-26
• /
• 1995

Hot Filament CVD법에 의해 증착된 다이아몬드 박막의 기판온도와 증착시간 변화에 따르는 표면형상 변화를 관찰함으로써 그 증착기구를 규명하고자 하였다. 기판온도가 낮을 경우에는 비정질 탄소 및 DLC(diamond like carbon)가 증착되고 기판온도가 증가함에 따라 사가형의 (100)명으로 구성된 입자를 가지는 다이아몬드 박막이 증착되었으며 매우 높은 기판온도에서는 (100)명과 (111)명으로 이루어진 결정외형을 가지는 입자들로 구성되는 다이아몬드 박막이 증착되었다. 다이아몬드 박막의 (100) 우선배향성은 증착시의 비교적 높은 과포화도에 기인하는 것으로 생각되며, 이러한 (100) 우선배향성을 가지는 박막은 결정면내에 twin을 함유하지 않으므로 단결정박막으로의 성장가능성이 크다. 기판온도가 증가해도 다이아몬드 박막의 입자크기는 증가하지 않았으며 시간에 따른 증가양상도 온도에 관계없이 비슷한 경향을 보였다. 그러나 필라멘트 온도가 일정할 때 다이아몬드 박막의 핵 밀도는 기판온도가 높을수록 증가하였으며 시간에 따른 증가폭도 기판온도가 높을수록 더 크게 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.519-523
• /
• 2013

When atomic layer deposition (ALD) is performed on a porous material by using an organometallic precursor, minimum exposure time of the precursor for complete coverage becomes much longer since the ALD is limited by Knudsen diffusion in the pores. In the previous report by Min et al. (Ref. 23), shrinking core model (SCM) was proposed to predict the minimum exposure time of diethylzinc for ZnO ALD on a porous cylindrical alumina monolith. According to the SCM, the minimum exposure time of the precursor is influenced by volumetric density of adsorption sites, effective diffusion coefficient, precursor concentration in gas phase and size of the porous monolith. Here we modify the SCM in order to consider undesirable adsorption of byproduct molecules. $TiO_2$ ALD was performed on the cylindrical alumina monolith by using titanium tetrachloride ($TiCl_4$) and water. We observed that the byproduct (i.e., HCl) of $TiO_2$ ALD can chemically adsorb on adsorption sites, unlike the behavior of the byproduct (i.e., ethane) of ZnO ALD. Consequently, the minimum exposure time of $TiCl_4$ (~16 min) was significantly much shorter than that (~71 min) of DEZ. The predicted minimum exposure time by the modified SCM well agrees with the observed time. In addition, the modified SCM gives an effective diffusion coefficient of $TiCl_4$ of ${\sim}1.78{\times}10^{-2}\;cm^2/s$ in the porous alumina monolith.

• 분석과학
• /
• 제30권5호
• /
• pp.279-286
• /
• 2017

범죄현장에서 자주 발견되는 감열지의 표면에 남겨진 잠재지문의 압인순서 결정은 지문의 경시 변화 및 지문 나이의 연구와 밀접한 관계가 있으며, 수사에 있어서 추가적인 정보를 제공할 수 있다. 이를 위한 예비실험으로 2가지의 압인 압력과 시간(second)으로 감열지(일반 영수증과 팩스종이)상에 유류한 시료지문을 1~7일의 경과 후에 일(day)별로 iodine fuming법으로 현출하였다. 가시화된 지문의 이미지를 농도계 이미지 분석을 통하여 압인순서와 상관관계가 있을 수 있는 융선의 평균 면적값의 변화를 분석하였다. 감열지 용지의 종류에 따른 큰 차이는 나타나지 않았으나 3일차까지는 지문 융선의 면적값은 점점 증가하거나 유사한 경향을 보였고 4일에서 7일차까지 점진적으로 감소하였다. 6일과 7일차 지문의 면적값은 1일차의 대략 1/2 이하였다. 또한 겹 지문을 실험 한 경우 6일차, 7일차 경우에는 1~3일차의 지문과의 큰 선명도 차이를 보여 육안 구별가능성을 보였다. 추후 압인 조건에 대한 추가적인 실험은 현재의 방법이 지문의 감열지상 압인순서 결정에 가치 있는 방법임을 증명할 수 있을 것이다.

• 물과 미래
• /
• 제9권2호
• /
• pp.67-75
• /
• 1976

With 9 existng reservoirs selected in the Sab-Gyo River Basin, the sedimentation of the reservoirs has been calculated by comparing the present capacity with the original value, which revealed its reduced reservoirs capacity. The reservoirs has a total drainage area of 6,792 ha, with a total capacity of 1,204.09 ha-m, and are short of water supply due to reduction of reservoirs capacity. Annual sedimention in the reservcire is relation to the drainage area, the mean of annual rain fall, and the slop of drainage area. The results of obtained from the investigation are summarized as follow; (1) A sediment deposition rate is very high, being about $9.19{m}^3/ha$ of drainage area, and resulting in the average decrease of reservoir capacity by 19.1%. This high rate of deposition could be mainly attributed to the serve denvdation of forests due to disor derly cuttings of tree. (2) An average unit storage of 415.8mm as the time of initial construation is decreesed to 315.59mm at present, as resultting, we could'nt supply water at 566.24ha. (3) A sediment deposition rate as a relation to the capacity of unit drainage area is as follow; $Qs=1.43 (c/a)^{0.531}$ (4) A sediment deposition rate as a relation to the mean of annval rainfall is as follow; $Qs=672.61 p^{0.024}$ (5) A sediment deposition rate as a relation to the mean slop of drainage area is follow; $Qs=267.21 S^{0.597}$