• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.2
• /
• pp.218-224
• /
• 2018

Objective: This study evaluated the effects of different levels of protein concentrate supplementation on the growth performance of yak calves, and correlated the growth rate to changes occurring in the plasma- amino acids, -insulin profile, and signaling activity of mammalian target of rapamycin (mTOR) cascade to characterize the mechanism through which the protein synthesis can be improved in early weaned yaks. Methods: For this study, 48 early (3 months old) weaned yak calves were selected, and assigned into four dietary treatments according to randomized complete block design. The four blocks were balanced for body weight and sex. The yaks were either grazed on natural pasture (control diet) in a single herd or the grazing yaks was supplemented with one of the three protein rich supplements containing low (17%; LP), medium (19%; MP), or high (21%; HP) levels of crude proteins for a period of 30 days. Results: Results showed that the average daily gain of calves increased (0.14 vs 0.23-0.26 kg; p<0.05) with protein concentrates supplementation. The concentration of plasma methionine increased (p<0.05; 8.6 vs $10.1-12.4{\mu}mol/L$), while those of serine and tyrosine did not change (p>0.05) when the grazing calves were supplemented with protein concentrates. Compared to control diet, the insulin level of calves increased (p<0.05; 1.86 vs $2.16-2.54{\mu}IU/mL$) with supplementation of protein concentrates. Addition of protein concentrates up-regulated (p<0.05) expression of mTOR-raptor, mammalian vacuolar protein sorting 34 homolog, the translational regulators eukaryotic translation initiation factor 4E binding protein 1, and S6 kinase 1 genes in both Longissimus dorsi and semitendinosus. In contrast, the expression of sequestosome 1 was down-regulated in the concentrate supplemented calves. Conclusion: Our results show that protein supplementation improves the growth performance of early weaned yak calves, and that plasma methionine and insulin concentrations were the key mediator for gene expression and protein deposition in the muscles.

• Korean Journal of Ichthyology
• /
• v.13 no.1
• /
• pp.6-18
• /
• 2001

Larvae of the gunnel Pholis fangi were collected in coastal waters off Daecheon with a bag net from March to June, 1988, and with a ring larva net in February 1989. Maturity and spawning period were analyzed by examination of the gonads of adult fish collected with a bag net from May 1998 through November 1999. In February, the larvae were widely distributed in the outer and inner Cheonsu Bay. From March to April the larvae were present mainly the inner bay; they were absent there in May and found mainly in the outer bay. After June, few gunnel larvae were collected in the study area. This suggests a seaward movement of gunnel from the nursery grounds of the bay to offshore feeding grounds. The otolith of larvae smaller than 10 mm in total length did not show a distinct growth stop. The growth stop is believed to be formed in the early larval stage when the total length is about 10 mm. This period coincides with the time of shoreward migration, suggesting a metabolic change during this period. At a total length of 30 to 40 mm, the shape of the otolith changes from spherical to elongate. Daily growth rate in length was estimated by the Gompertz equation, which is represented as follows: TL = 6.702exp{2.925"1-exp (-0.008 t)"} ($r^2=0.94$, N = 92) Assuming daily deposition of growth increments in the otolith, the time of first growth increment formation was shown to be from December to January. Gonad observations show that Pholis fangi spawns from November to December. So, the hatching time is thought to be about one month.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.12
• /
• pp.1785-1793
• /
• 2008

Fifty-four PIC barrows were used to evaluate the effects of lower dietary lysine content and energy level on carcass characteristics and meat quality in slaughter pigs. Pigs were allotted to one of three treatments by body weight with six replicate pens in each treatment. The dietary treatments for body weights of 20-50 kg, 50-80 kg and 80-90 kg were as follows, respectively: control diet (digestible energy 14.22 MJ/kg, lysine/DE 0.67 g/MJ, 0.53 g/MJ and 0.42 g/MJ); a low lysine group (digestible energy 14.22 MJ/kg, lysine/DE 0.49, 0.38 and 0.30 g/MJ); and a low lysine-low energy group or low nutrient group (digestible energy 13.11 MJ/kg, lysine/DE 0.49, 0.38 and 0.30 g/MJ). The daily weight gain, daily feed intake and feed efficiency were calculated in the overall growth period (nearly 12 weeks). Meanwhile, carcass characteristics and meat quality were evaluated at 60 and 90 kg body weight respectively. During the overall growth trial, lowering dietary lysine and nutrient level both decreased weight gain (p<0.05) and feed efficiency (p<0.01). At 60 kg body weight, decreasing dietary lysine and nutrient level noticeably decreased dressing percentage (p<0.01) and back fat depth at last rib of PIC pigs (p<0.01), but enhanced marbling scores (p<0.10), intramuscular fat content (p<0.10) and water loss rate (p<0.01) of the longissimus dorsi muscle. At 90 kg body weight, lean percentage (p<0.01) was evidently reduced by both lowering lysine content and nutrient level in the diet. However, the shoulder back fat depth (p<0.05) and marbling scores of the loin eye muscle (p<0.05) were increased; Lowering dietary nutrient level could improve back fat depth of 10th rib (p<0.01) and last rib (p<0.01), intramuscular fat content (p<0.10), redness (p<0.01) and water loss rate of the loin eye muscle (p<0.05), but decrease loin area (p<0.05). Finally, when comparing the 60 kg and 90 kg slaughter weights, it was found that the shoulder back fat depth (p<0.01, p<0.10), 6th-7th rib (p<0.01, p<0.01), 10th-rib (p<0.01, p<0.01) and last rib back fat depth (p<0.01, p<0.01) of the low lysine and low nutrient group were all obviously increased comparing with the control group. Taken together, the results showed that decreasing dietary lysine content and nutrient level increased intramuscular fat content and water loss rate of longissimus dorsi muscle; On the other hand, both lowering dietary lysine and nutrient level markedly compensated to increase back fat deposition in the later finishing period (body weight from 60 to 90 kg) in contrast to the control group.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.136.1-136.1
• /
• 2015

In the present study, UHF (320 MHz) in combination with RF (13.56 MHz) plasmas was used for the synthesis of hydrogenated silicon nitride (SiNx:H) films by PECVD process at low temperature. RF/UHF hybrid plasmas were maintained at a fixed pressure of 410 mTorr in the N2/SiH4 and N2/SiH4/NH3 atmospheres. To investigate the radical generation and plasma formation and their control for the growth of the film, plasma diagnostic tools like vacuum ultraviolet absorption spectroscopy (VUVAS), optical emission spectroscopy (OES), and RF compensated Langmuir probe (LP) were utilized. Utilization of RF/UHF hybrid plasmas enables very high plasma densities ~ 1011 cm-3 with low electron temperature. Measurements using VUVAS reveal the UHF source is quite effective in the dissociation of the N2 gas to generate more active atomic N. It results in the enhancement of the Si-N bond concentration in the film. Consequently, the deposition rate has been significantly improved up to 2nm/s for the high rate synthesis of highly transparent (up to 90 %) SiNx:H film. The films properties such as optical transmittance and chemical composition are investigated using different analysis tools.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.9
• /
• pp.1151-1162
• /
• 1999

The effects of radial heat and $H_2O$ diffusion on the evolution of silica particles in coflow diffusion flames have been studied experimentally. The evolution of silica aggregate particles in coflow diffusion flames has been measured experimentally using light scattering and thermophoretic sampling techniques. The measurements of scattering cross section from $90^{\circ}$ light scattering have been utilized to calculate the aggregate number density and volume fraction using with combination of measuring the particle size and morphology through the localized sampling and a TEM image analysis. Aggregate or particle number densities and volume fractions were calculated using Rayleigh-Debye-Gans and Mie theory for fractal aggregates and spherical particles, respectively. Flame temperatures and volumetric differential scattering cross sections have been measured for different flame conditions such as inert gas species, $H_2$ flow rates, and burner injection configurations to examine the relation between the formation of particles and radial $H_2O$ diffusion. The comparisons of oxidation and flame hydrolysis have also been made for various $H_2$ flow rates using $N_2$ or $O_2$ as a carrier gas. Results indicate that the role of oxidation becomes dominant as both carrier gas($O_2$) and $H_2$ flow rates increases since the radial heat diffusion precedes $H_2O$ diffusion in coflow flames used in this study. The effect of carrier gas flow rates on the evolution of silica particles have also been studied. When using $N_2$ as a carrier gas, the particle volume fraction has a maximum at a certain carrier gas flow rate and as the flow rate is further increased, the hydrolysis reaction Is delayed and the spherical particles finally evolves into fractal aggregates due to decreased flame temperature and residence time.

• The Journal of Korean Physical Therapy
• /
• v.27 no.3
• /
• pp.140-146
• /
• 2015

Purpose: To determine the effects of 630 nm light emitting diode (LED) on full-thickness wound healing. Methods: Twelve male Sprague-Dawley rats were randomly divided into LED (n=6) and control group (n=6). Two $19.63mm^2$ wounds were created on the mid dorsum. LED group received a 630 nm LED irradiation with $3.67mW/cm^2$ for 30 minutes ($6.60J/cm^2$) for 7 days, while control group received sham LED irradiation. Epithelial gap, collagen density, ${\alpha}$-SMA fibroblast and PCNA keratinocyte were measured on histochemical and immunohistochemical staining using image analysis system. An independent t-test was conducted to compare the difference between groups. Results: The wound closure rate, collagen density, ${\alpha}$-SMA fibroblast number, epithelial gap and PCNA keratinocyte number have shown no significant difference between LED and control group at day 3 after the treatment. At day 7 after the treatment, the wound closure rate in LED group was increased when compared with control group (p<0.05). The collagen density (p<0.05) and ${\alpha}$-SMA immunoreactive fibroblast number (p<0.001) were increased when compared with control group at day 7. The epithelial gap in LED group was significantly shorten than control group at day 7 (p<0.01). The PCNA positive cell number in LED group was higher than control group at day 7 (p<0.01). Conclusion: 630 nm LED with $3.67mW/cm^2$, $6.60J/cm^2$ accelerate collagen deposition by stimulating fibroblasts, and enhance wound contraction by differentiating myofibroblasts in the dermis, and accelerate keratinocyte proliferation by facilitating DNA synthesis in the epidermis. It may promote the healing process in proliferation stage of wound healing.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.225-230
• /
• 1999

Low pressure metal organic chemical vapor deposition (LPMOCVD) of $Li_2O$ solid thin films from Li(DPM) in nitrogen-oxygen or argon-oxygen atmosphere was experimentally investigated by using a small hot wall tubular type reactor. XRD and ESCA analysis revealed that $Li_2CO_3$ film grew in nitrogen-oxygen atmosphere and $Li_2O$ grew in argon-oxygen atmosphere. The grown lithium oxide or carbonate reacted with silicon or silica base materials to produce silicates. The CVD model analysis by means of the well-known micro trench method and Monte Carlo simulation was not fully successful, but a set of data on gas phase reaction rate constant and surface reaction constant was obtained.

• Korean Journal of Metals and Materials
• /
• v.48 no.11
• /
• pp.1041-1046
• /
• 2010

The reactions between a Sn-3.0Ag-0.5Cu solder alloy and electroless Ni/electroless Pd/immersion Au (ENEPIG) surface finishes with various Pd layer thicknesses (0, 0.05, 0.1, 0.2, $0.4{\mu}m$) were examined for the effect of the Pd layer on the massive spalling of the $(Cu,Ni)_6Sn_5$ layer during reflow at $235^{\circ}C$. The thin layer deposition of an electroless Pd (EP) between the electroless Ni ($7{\mu}m$) and immersion Au ($0.06{\mu}m$) plating on the Cu substrate significantly retarded the massive spalling of the $(Cu,Ni)_6Sn_5$ layer during reflow. Its retarding effect increased with an increasing EP layer thickness. When the EP layer was thin (${\leq}0.1{\mu}m$), the retardation of the massive spalling was attributed to a reduced growth rate of the $(Cu,Ni)_6Sn_5$ layer and thus to a lowered consumption rate of Cu in the bulk solder during reflow. However, when the EP layer was thick (${\geq}0.2{\mu}m$), the initially dissolved Pd atoms in the molten solder resettled as $(Pd,Ni)Sn_4$ precipitates near the solder/$(Cu,Ni)_6Sn_5$ interface with an increasing reflow time. Since the Pd resettlement requires a continuous Ni supply across the $(Cu,Ni)_6Sn_5$ layer from the Ni(P) substrate, it suppressed the formation of $(Ni,Cu)_3Sn_4$ at the $(Cu,Ni)_6Sn_5/Ni(P)$ interface and retarded the massive spalling of the $(Cu,Ni)_6Sn_5$ layer.

• Journal of Ginseng Research
• /
• v.46 no.6
• /
• pp.771-779
• /
• 2022

Background: As a kind of common complication of the surgery of perianal diseases, perianal ulcer is known as a nuisance. This study aims to develop a kind of 20(S)-ginsenoside Rg3 (Rg3)-loaded hydrogel to treat perianal ulcers in a rat model. Methods: The copolymers PLGA₁₆₀₀-PEG₁₀₀₀-PLGA₁₆₀₀ were synthesized by ring-opening polymerization process and Rg3-loaded hydrogel was then developed. The perianal ulcer rat model was established to analyze the treatment efficacy of Rg3-loaded hydrogel for ulceration healing for 15 days. The animals were divided into control group, hydrogel group, free Rg3 group, Rg3-loaded hydrogel group, and Lidocaine Gel® group. The residual wound area rate was calculated and the blood concentrations of interleukin-1 (IL-1), interleukin-6 (IL-6), and vascular endothelial growth factor (VEGF) were recorded. Hematoxylin and eosin (H&E) staining, Masson's Trichrome (MT) staining, and tumor necrosis factor α (TNF-α), Ki-67, CD31, ERK1/2, and NF-κB immunohistochemical staining were performed. Results: The biodegradable and biocompatible hydrogel carries a homogenous interactive porous structure with 10 ㎛ pore size and five weeks in vivo degradation time. The loaded Rg3 can be released sustainably. The in vitro cytotoxicity study showed that the hydrogel had no effect on survival rate of murine skin fibroblasts L929. The Rg3-loaded hydrogel can facilitate perianal ulcer healing by inhibiting local and systematic inflammatory responses, swelling the proliferation of nuclear cells, collagen deposition, and vascularization, and activating ERK signal pathway. Conclusion: The Rg3-loaded hydrogel shows the best treatment efficacy of perianal ulcer and may be a candidate for perianal ulcer treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.