• 한국안전학회지
• /
• 제31권5호
• /
• pp.133-140
• /
• 2016

Most small weir installed in Korea is concrete solidated weir. Fixed weir causes stagnant flow, which leads to deposit sediment just upstream of weir. As time goes on, it would induce reduction of water storage capacity and invoke the serious water quality issues. Therefore, there has been a growing interest in movable weir. Especially, the flexible rubber weir is easy to install and possible to operate in extreme environments. However, even though this type can be flatable, it is also not free from sediment deposition problem. Thus, to enhance the ability of releasing deposition the bypass pipe was constructed underneath it. In this study the performance of its ability was examined with hydraulic model test. This bypass pipe was designed with 3 different dimensions to connect between each bottom of upstream and downstream of a weir, such as Type A, B, and C. The efficiency of drainage of deposition upstream was studied under two water of upstream and sediment heights. In addition, the ability of sediment emission through the bypass pipe after the pipe was blocked by debris like soil, vegetation et al. was examined by video monitoring. From this study, it was suggested a dimensionless equation which show the relationship of variable parameters and amount of emission sediment through bypass pipe. And it was found that the most significant factors on efficiency of releasing were elbow angle and discharge, and the ability of emission when the pipe was blocked was most highly influenced in tilting length.

• 대한의용생체공학회:의공학회지
• /
• 제25권4호
• /
• pp.309-314
• /
• 2004

본 연구에서는 세포배양을 위해 개발된 복합생물반응기(Hybrid bioreactor)의 배양조건의 유효성을 평가하고, 3차원 키토산 지지체 (Chitosan-Scaffold Sponge Type)에 배양된 세포에 Hybrid Bioreactor를 이용한 물리적 자극에 대한 반응을 실험하였다. Hybrid bioreactor는 압축변형과 전단변형을 동시에 가할 수 있도록 제작되었다. 본 실험에서는 지지체 크기의 2.5% 변형으로 14일간 150회씩 0.5Hz 로 물리적 자극을 가하였다. 14일간 배양한 세포군은 일정 날짜에 샘플링 (sampling) 하였다. (Day 6, 8, 10, 12, 14). 세포 성장 정도를 알 수 있는 전체 단백질 양을 Lowey의 방범으로 분석하였으며, 분화의 시작을 알리는 표적단백질인 알카라인 포스파타제(Alkaline phosphatase)양을 ELISA로 측정하였다. Hybrid bioreactor를 이용하여 물리적 자극을 가한 군은 자극을 가하지 않은 군에 비하여 표적단백질의 형성을 촉진하였으며, 자극을 가한 관에서 사극을 가하지 않은 군에 비해 빠른 칼슘침착을 나타내었다.

• 한국측량학회지
• /
• 제29권5호
• /
• pp.535-541
• /
• 2011

토석류는 집중호우시 산악지형에서 발생한 사면파괴 쇄설물 또는 계곡 내에 쌓여 있던 퇴적토가 많은 양의 물과 섞여 흐르는 현상으로서 이동경로나 퇴적지점에 있는 시설물, 가옥, 인명에 큰 피해를 유발한다. 본 연구에서는 해외에서 연구되었던 토석류 거동에 관련된 모형식을 국내 사례에 적용해 보았으며, 이를 위해 우리나라 강원도 인제군에서 발생한 산사태 및 토석류에 대해 항공사진과 GPS 현장 측량성과를 이용하여 발생부와 퇴적부 자료를 수집하였다. 분석한 결과 토석류 이동거리를 예측할 수 있는 L/H는 평균 4.93, 표준편차 0.97을 나타내었다. 토석류의 규모와 면적을 예측하는 경우 과대 산정되는 문제가 있으며 이는 우리나라의 토석류가 상부의 대규모 산사태로 유발되는 것이 아니고 다발적으로 발생한 소규모 산사태로 인한 것이기 때문인 것으로 보인다. 따라서 국내 산지 환경에 적합한 경험식에 대한 연구가 필요하다고 판단된다.

• 한국지역지리학회지
• /
• 제11권1호
• /
• pp.114-122
• /
• 2005

태안반도 신두 해안사구지대의 중앙부에서 고사구층으로 판단되는 퇴적물의 퇴적시기를 파악하기 위해 OSL 연대측정을 실시하였다. 조사 지점 최하부에서의 사구사 퇴적은 대략 680$\sim$730년 전으로, 1.5m 깊이에서는 480$\sim$610년 전으로 나타났다. 반면 1.3m부근의 암갈색 퇴적층을 사이에 두고 1.2m 깊이 퇴적층에서의 산출연대는 123$\sim$151년 전으로, 최상부 퇴적물의 연대는 약 68년인 것으로 나타났다. 한편, 사구 표면으로부터 1.5m와 3m 깊이에서 채취한 두개의 시료는 200년 정도의 연대 차이가 있다. 이에 의하면 사구사의 집적율은 연간 약 0.75cm로 나타났다. 본 조사에서 연대를 추정한 사구사 퇴적층은 1개 지점에 불과하지만, 이를 토대로 볼 때, 지난 1,000년간 상당한 양의 사구사가 퇴적되었거나 재이동되었고, 적어도 한번의 토양화과정이 진행되었음을 알 수 있다. 이러한 사실은 지금까지 플라이스토세나 홀로세 초기로 알려진 고사구층의 형성 연대에 대한 연구가 다시 시도되어야 함을 시사한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.241.1-241.1
• /
• 2011

Numerous possible applications for $ZrO_2$ nanotubes exist such as for catalyst support structures, for sensing or for applications as a solid state electrolyte. Especially, because of a large specific surface area, high efficiency for solid oxide fuel cell (SOFC) application at low temperature can be expected for nanotublar structures in even small size. A zirconium precursor, Tetrakis (ethylmethylamino) zirconium, TEMAZr and $H_2O$ oxidant were used to deposit$ZrO_2$ thin films on an anodized aluminum oxide (AAO) templates having sub-100nm cylindrical pores by atomic layer deposition (ALD) in the temperature range of 150~250$^{\circ}C$. The crystalline structures of as-prepared and post-annealed $ZrO_2$ nanotubes were characterized by x-ray diffraction and high-resolution transmission electron microscopy. The as-prepared samples at $150^{\circ}C$ and $200^{\circ}C$ were showed amorphous, whereas a mixed phase of tetragonal, monoclinic and amorphous polymorph was observed at $250^{\circ}C$. In the bulk, zirconia remains monoclinic phase up to $1,175^{\circ}C$, however, $ZrO_2$ nanotubes were showed tetragonal phase upon post thermal treatments merely at $400^{\circ}C$. This trend may be indicative of high-curvature surfaces of nanotubes and thereby the presence of intrinsic compressive strain. The amount of amorphous structures in the mixed phase as well as as-grown $ZrO_2$ nanotubes were also gradually decreased by subsequent heat treatment.

• 한국분무공학회지
• /
• 제12권1호
• /
• pp.38-44
• /
• 2007

Since the Liquid Phase LPG injection (LPLI) system has Advantages in power generation and emission characteristics compared to the mixer-type fuel-supply system, a variety of studies regarding LPLi system has been conducted and its applications are made in automobile industry. However, the heat extraction due to the evaporation of liquid fuel, causes not only a post-accumulation of fuel but also an icing phenomenon which is a frost of moisture in the air around the nozzle tip. Since there exists a difficulty in the accurate control of air fuel ratio in both fuel supply systems, it can result in poor engine performance and a large amount of harmful emissions. This research examines the characteristics of icing phenomenon and develops anti-icing bushing to prevent an icing on the surface of the injection tip. It was found that n-butane, which has a relatively high boiling point ($-0.5^{\circ}C$), was a main species of post-accumulation. Also the results show that the post-accumulation problem was allevaited the utilization of a large inner to outer bore ratio and smooth surface roughness. In addition, an icing phenomenon and its formation process were found to be mainly affected by the humidity and the temperature of inlet air in an inlet duct. Also, it was observed that an icing phenomenon is lessened using aluminum bushing whose end coincides with the end of fuel injection tip in length.

• 한국분무공학회지
• /
• 제13권4호
• /
• pp.212-219
• /
• 2008

To develop the twin-fluid atomizer having the excellent performance of painting, the spray characteristics of how a wide area can be painted efficiently by one time spraying were studied in this paper. Spray phenomena are affected by the many factors determining the spray field such as the spraying pressure of gas, the spraying pressure and viscosity of liquid paints, the opening duration of needle valve, the design dimension of nozzle, and so on. As the results of experiments, these factors affecting on spray characteristics were suggested as followings; 1) The optimum spraying pressure of gas was $0.015{\sim}0.02\;kPa$, and the appropriate spraying pressure of liquid paint was 0.01kPa, In these situations, the setting up pressures must be compensated as much as the losing amount of pressure because a decompression occurred when operating valves. 2) The duration of opening the needle valve must be sustained for $1{\sim}2$ seconds to inject gas after spraying the liquid paint. This operating of the needle valve was necessary to avoid the affect on the changing of liquid column length, and to prevent the droplet deposit at the initial time of spraying. 3) The spray tip penetration was gained form the experimental equation, and the effective spraying angle was $85^{\circ}{\pm}5^{\circ}$ just at he appropriate spraying pressure of gas. The distribution of the area sprayed had the variation in $350{\pm}50\;mm$ because of the spraying pressure of gas, the its distance from the spray tip, and the lift of the needle valve.

• 공업화학
• /
• 제8권3호
• /
• pp.382-388
• /
• 1997

본 연구는 펄스 반응기 및 고정층 연속반응기를 사용하여 ${\gamma}$-알루미나에 담지된 니켈촉매상에서 이산화탄소에 의한 프로판의 개질반응 특성을 고찰한 것이다 Ni/${\gamma}$-$A1_2O_3$촉매가 NiO/${\gamma}$-$A1_2O_3$촉매보다 $CO_2$의 해리능력과 프로판의 개질 능력이 우수한 것으로 나타났다. 프로판과 $CO_2$의 혼합물에 산소를 추가한 결과 프로판의 전환율이 증가하였고 표면의 탄소침적도 감소함을 알 수 있었다. Ni/${\gamma}$-$A1_2O_3$와 $Ga_2O_3$의 기계적 혼합 촉매는 Ni/${\gamma}$-$A1_2O_3$자체보다 촉매의 활성이 오래 유지되었고 두 상의 협동에 의한 상승효과(synergistic effect)가 관찰되었다.

• 한국문헌정보학회지
• /
• 제27권
• /
• pp.99-124
• /
• 1994

This study examines the establishment of Sea-po (서포) in the opening period of Korea at the end of the 19th century. The role they played, the particular situations and their geographical characteristics are researched, The earliest sea-po was Koh-je-hong sea-po, which was established in Tae­kwang-kyo at the end of 1880s. Around 1905, a specialised book distribution system was set up with establishement of Chu-han-yung book store, Kim-sang-man book store, Jesuit book store, Tae-dong su-si, Kae-myung sea-kwan, Tong-wha seo-kwan. The owners of the seo-pos were pioneers in introducing modern culture with nationalistic consciousness, although they were primarily businessmen and their social origins varied. The primary role of seo-pos was selling a variety of books but some combined printing and publication of books as well. It seems that publication business took roots around 1908, though it is difficult to know the accurate dates of first attempts. Some sea-pas offered book rental services for poor people who could not easily afford to purchase books. A certain amount of deposit had to be paid to benefit from the services. Jesuit Bookstore in Pyungyang had a library facility with a large stock or books in the same building open to public for free. These sea-pas started mainly in Seoul and Pyungyang, which were traditional centers for economic and cultural affairs. Early introduction of foreign cultures and commercial developments in these areas contributed to the establishment of sea-pos. The sea-po which took charge of book distribution in the provinces was set up around 1906. One of the important findings of this study is that the geographical distribution of sea-po shows the following three characteristics. First is that the area such as Seoul, Taegu and Chunju were the traditional centers of publishing culture from which Pang­gak-bon(방각본) emerged. Second characteristic is Pyungyang and the surrounding Pyungbuk province, and harbors like Inchon and Pusan, which had the benefits of early spread of modem cultures. Third characteristic is Kaesung and the surrounding Hwanghae province which bridged Pyungyang and Seoul. The reception of foreign cultures stimulated the commercial spirits traditionally attributed to Kaesung to establish sea-pas most actively.

• 한국환경복원기술학회지
• /
• 제17권6호
• /
• pp.1-15
• /
• 2014

A dredging on erosion control dam has been enforced without evaluation the factors that affect the dredging. In addition, there is the negative effect much more than positive effect by dredging on erosion control dam. Therefore, this study was carried out to develop evaluation indicators and to suggest fieldbook in order to determine whether sand deposits at erosion control dam should be dredged up or not. The most important six evaluation indicators that can decide to dredge up at erosion control dam were obtained from three round delphi technique and were selected in the following order: the current sand deposit ratio(0.339), existence of cultivated land and house downstream(0.276), the slope of streambed(0.162), the amount of movable soil and gravel(0.118), the history of any disasters(0.063), the basin area(0.043). The weighted score for each evaluation indicator were acquired from AHP analysis with respect to the degree of importance and then the modified weighted score for actual measurements were classified as three categories: large(2.53), medium(1.60) and small(1.01). Based on delphi technique, erosion control dam dredging evaluation fieldbook introduced the four evaluation indicators out of the total six evaluation indicators and two low effected evaluation indicators were excluded. This results showed that the values for reliability analysis and consistency ratio were acceptable.