• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.789-805
• /
• 1998

The purpose of this study was to compare the microleakage of the IPS Empress ceramic crown according to 1) margin types such as rounded shoulder and bevel, 2) margin locations such as enamel and dentine, 3) resin cement types such as Variolink and Bistite. For this study, 80 extracted premolar teeth were used. After 10 experimental dies were prepared for each group, the IPS Empress ceramic crowns were fabricated on the dies and cemented with one of two types of resin cement. After 1,000 cycles of thermal changes were given with the thermocycling unit, each specimen was sectioned with a low speed diamond saw in both the buccolingual and the mesiodistal direction. The microleakage was then measured with a stereo microscope. The obtained results were as follows : 1. Every experimental group showed microleakage. The microleakage of the crowns which had a rounded shoulder on enamel cemented with Variolink was the lowest of all. The resulting rank of the mean microleakage was rounded shoulder on enamel using Variolink(0.601mm), rounded shoulder on enamel using Bistite (0.794mm), bevel on enamel using Variolink (0.826mm), rounded shoulder on dentine using Variolink(1.054mm), bevel on enamel using Bistite(1.087mm), rounded shoulder on dentine using Bistite(1.176mm), bevel on dentine using Variolink(1.258mm), and bevel on dentine using Bistite(1.467mm). 2. The statistically significant differences in the microleakage were found in 4 cases: rounded shoulder on enamel using Variolink and bevel on dentine using Variolink, rounded shoulder on enamel using Variolink and bevel on dentine using Bistite, rounded shoulder on enamel using Bistite and bevel on dentine using Bistite, bevel on enamel using Variolink and bevel on dentine using Bistite. 3. The microleakage of rounded shoulder finish line was lower than that of bevel finish line. The statistically significant differences were found with respect to the type of finish lines. 4. The microleakage of the finish line on enamel was lower than that of finish line on dentine. The statistically significant differences were found with respect to the location of the finish lines. 5. The microleakage of the Variolink cement was lower than that of the Bistite cement. The statistically significant differences were found with respect to the resin cements.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.4819-4825
• /
• 2010

치과 진료에 사용되는 세라믹 재료들은 고유존재비에 따라 자연방사성 핵종을 포함하고 있다. 이 방사성 핵종들은 치과 진료를 통하여 세라믹 재료들이 인체에 시술됨에 따라 구강 내에서 내부 방사선 피폭을 일으키게 된다. 본 연구에서는 치과재료 속에 포함된 방사성 핵종에 의해 인체에 영향을 미칠 수 있는 영향을 평가하기 위하여 치과 재료용으로 흔히 사용되는 22종류의 세라믹 재료와 1종류의 temporary resin 및 2종류의 glass ionomer cement에 대하여 전$\beta$ 방사능을 측정하였다. 측정 결과 치과 세라믹 재료의 전$\beta$ 방사능은 1.317 ~ 2.935 Bq/g 이었으며, 세라믹 재료 평균 전$\beta$ 방사능 농도는 2.379 Bq/g이었다. 세라믹 재료 중 전$\beta$ 방사능이 가장 높은 것은 opacious dentine의 code OD-A4로 2.935 Bq/g이었다. Dentine, opacious dentine, translucent 및 enamel의 평균 전$\beta$ 방사능은 각각 2.479 Bq/g, 2.491 Bq/g, 2.470 Bq/g 및 2.069 Bq/g 이었다. Temporary resin과 glass ionomer cement의 전$\beta$ 방사능 농도는 세라믹 재료에 비하여 측정오차범위 내의 무시할 만한 값이었으며, 전$\beta$ 방사능의 준위에 가장 많은 영향을 미치는 방사선동위원소는 40K으로 판단된다. 치과 재료의 방사선 준위에 추가적인 조사와 치과용 재료 내의 방사능 준위를 줄이기 위하여 이에 대한 기준이나 개선방안이 필요할 것으로 사료된다.

• 대한치과보철학회지
• /
• 제37권1호
• /
• pp.51-70
• /
• 1999

Dental porcelain is one of the materials of choice for restoration where esthetics is of concern, but has a considerable potentials of wear. The wear of enamel is variable when opposed by different porcelain systems and surface conditions, and the exposed dentine and opaque porcelain due to clinical failure is expected to have high potentials of wear. The purpose of this study was to investigate the wear effects of self-glazed, polished incisal porcelain. polished dentine and opaque porcelain against human enamel in the laboratory by use of a pin-on-disk type wear tester. 4 types of dental porcelain($Vita-{\Omega}$, Ceramco-II, Vintage powder $Vita-{\alpha}$ of In-Ceram system) and type IV gold alloy as cotrol group were used for test specimens. Intact buccal cusps of maxillary premolar were used for enamel specimens, and the cusp converged to a point and was devoid of visible abrasion, caries, decalcification. The upper part was the cusp of a maxillary premolar and the lower part was a porcelain specimen. The enamel wear was deter-mined by weighing the cusp before and after each test. Surface profilometer was used to quantitate wear of the porcelain specimens. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows : 1 Self-glazed porcelain produced more enamel wear than polished porcelain, especially the enamel wear of $Vita-{\alpha}$ self-glazed porcelain was 3.2 times more than that of other groups. 2. Opaque porcelain produced least porcelain wear, $Vita-{\alpha}$ self-glazed porcelain produce greatest porcelain wear, but there was no statistically significant difference between the groups(p>0.05). 3. The enamel wear of dentine porcelain was 3.8 times more than that of polished inisal porcelain(p<0.05), and the enamel wear of opaque porcelain was 1.9 times more than that of polished inisal porcelain, but there was no statistically significant difference between the groups(p>0.05) 4. Overglazed porcelain produced less enamel wear than self-glazed porcelain, and more enamel wear than polished porcelain, but there was no statistically significant difference between the groups(P>0.05). 5. The hardness number of $Vita-{\Omega}$ dentine and Ceramco-II opaque porcelain was larger, but that of Vintage dentine and $Vita-{\alpha}$ self-glazed porcelain was similar to other groups. 6. Examination of SEM photographs revealed that overglazed porcelain had smoother surface than self-glazed porcelain, and self-glazed porcelain had smoother surface than polished porcelain. Much polishing scratches and larger porosities were observed on the opaque porcelain specimen, and much polishing scratchess and small porosities were observed on the dentine porcelain specimen.

• Restorative Dentistry and Endodontics
• /
• 제34권6호
• /
• pp.526-536
• /
• 2009

상아질의 재광화에 적당한 불소농도에 대하여는 서로 다른 주장이 존재하므로 불소가 병소 내 무기질의 분포와 수산화인회석 결정성장에 미치는 영향을 분석하기 위하여 이 연구를 시행하였다. 치아절편을 유산완충 탈회용액에 넣어 인공 치아우식을 형성한 후, 재광화 효과를 관찰하기 위해 불소농도가 각각 1, 2, 4 ppm인 유산완충 재광화용액에서 7일간 유지시켰다. 우식 진행과 재광화 양상을 관찰하기 위하여 탈회 2일, 재광화 7일 등 총 9일간 편광현미경으로 관찰하였으며 수산화인회석결정의 변화를 관찰하기 위하여서는 정상상아질, 탈회 2일군, 재광화 7일군의 파절시편을 주사전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. 모든 군에서 병소상부의 무기질침착과 병소하부의 무기질소실이 동시에 일어났다. 2. 불소농도가 증가하면 우식 병소의 무기질침착이 증가하였다. 3. 수산화인회석결정이 커졌다. 본실험의 결과에 의하면, 상아질의 우식과 재광화과정이 단순히 탈회 또는 재광화만이 독립적으로 일어나는 과정이 아니고 이 두 과정이 동시에 일어나는 동력학적인 과정이다. 또한 불소농도의 증가와 함께 재광화 양상도 증가하였고, 이러한 재광화는 유기기질망 주위의 수산화인회석결정을 중심으로 진행되었다.

• Restorative Dentistry and Endodontics
• /
• 제13권1호
• /
• pp.41-52
• /
• 1988

The purpose of this study was to investigate the pulpal responses to acid etching of dentine. Total 72 class V cavaties' were prepared on the healthy permanent teeth from 6 dogs, and were divided into 4 groups. These were filled with filling materials after acid etching with each etchant for 1 min. Control group ; ZOE filling without acid etching. Group 1: Zinc Oxide-Eugenol cement filling. Group 2: Drying with hot air and Zinc oxide-Eugenol cement filling. Group 3: Scotchbond application and silux filling. Group 4: Silux filling. The dogs were sacrificed after 1 week, 2 weeks, 3 weeks, 4 weeks, 5 weeks and 6 weeks following operation. The specimens were routinely prepared and stained with Hematoxylin and Eosin. Followings were the results obtained through microscopic examination. 1. There was mostly severe pulpal responses in case of Silux filling after acid etching of dentine. 2. The pulpal responses of Silux filling after acid etching and application of Scotch bond group were more severe compared to Zinc Oxide-Eugenol cement filling group, but less severe compared to Silux filling group after acid etching of dentine. 3. The pulpal responses of Zinc Oxide-Eugenol cement filling group were similar to those of Zinc Oxide-Eugenol cement filling after drying with hot air group. 4. There was slight pulpal responses in early stage in case of Zinc Oxide-Eugenol cement filling group, but recovered to normal state soon after.

• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.129-134
• /
• 2012

Purpose: This study was conducted to investigate the colors of zirconia and veneered ceramics according to the build-up method of veneer porcelain. Methods: The samples were divided into three groups: a group for which a liner was applied to the zirconia surface and dentine coating was built up and burned (Cz1), a group for which the dentine coating was directly built up and burned (Cz2), and a group for which the samples were wash-burned with dentine coating and a dentine coating was built up and burned again (Cz3). The the colors were measured with a Spectrophoto-meter. Results: The average $L^*$ value of the Cz3 group was the highest among the groups at $59.1{\pm}0.5$ (P<0.05), followed by Cz2 at $57.5{\pm}0.8$ and Cz1 at $56.6{\pm}1.3$. The $a^*$ value of Cz3 was negative at $-0.0{\pm}0.0$ and the $a^*$ values of Cz2 and Cz1 were positive at $0.2{\pm}0.1$ and $0.4{\pm}0.0$, respectively (P<0.05). The $b^*$ of Cz1 was the highest at $11.2{\pm}0.6$, followed by Cz3 at $10.8{\pm}0.5$ and Cz2 at $10.5{\pm}0.8$ (P<0.05). Conclusion: Compared to other experimental groups, the Cz3 groups showed the brightest colors with high brightness and relatively low green and yellow levels.

• Journal of Oral Medicine and Pain
• /
• 제14권1호
• /
• pp.43-55
• /
• 1989

The need of age estimation for identification was increased by complexity of society, and the tooth was used widely for age estimation because of less individual deviation than the other organ. The age estimation using the tooth had several methods. Recently, the one using the racemization of aminoacid in the tooth was admitted more accurate than the other methods, especially in old age. But, this study was not tried in our country, and I would report the result of experiment about age estimation using racemization of dentine. I selected 40-Whole dentine sample from extracted teeth, those were reserved in natural dried condition for 2 weeks~ 1year and calculated the estimation of age from the ratio of D-aminoacid and L-aminoacid (D/L ratio) using gaschromatography and the results were below. 1. The aminoacids showed apparent K/L ratio in dentine were aspartic acid, serine. 2. The aspartic acid showed the highest racemic rate and its rate was 0.0012$\pm$0.0003/yr. 3. The relation between the actual age and K/L ratio was very positive correlation(r+0.954) in the estimation of age using aspartic acid. 4. The deviation between the estimated age using D/L ratio of aspartic acid and actual age was $\pm$3.32.

• Journal of Microbiology and Biotechnology
• /
• 제28권3호
• /
• pp.454-464
• /
• 2018

Salivary microbiota alterations can correlate with dental caries development in children, and mechanisms mediating this association need to be studied in further detail. Our study explored salivary microbiota shifts in children and their association with the incidence of dental caries with dentine involvement. Salivary samples were collected from children with caries and their subsequently matched caries-free controls before and after caries development. The microbiota was analyzed by 16S rRNA gene-based high-throughput sequencing. The salivary microbiota was more diverse in caries-free subjects than in those with dental caries with dentine involvement (DC). Although both groups exhibited similar shifts in microbiota composition, an association with caries was found by function prediction. Analysis of potential microbiome functions revealed that Granulicatella, Streptococcus, Bulleidia, and Staphylococcus in the DC group could be associated with the bacterial invasion of epithelial cells, phosphotransferase system, and ${\text\tiny{D}}-alanine$ metabolism, whereas Neisseria, Lautropia, and Leptotrichia in caries-free subjects could be associated with bacterial motility protein genes, linoleic acid metabolism, and flavonoid biosynthesis, suggesting that functional differences in the salivary microbiota may be associated with caries formation. These results expand the current understanding of the functional significance of the salivary microbiome in caries development, and may facilitate the identification of novel biomarkers and treatment targets.

• Journal of Oral Medicine and Pain
• /
• 제30권4호
• /
• pp.465-473
• /
• 2005

냉온자극 또는 잇솔질에 불편감을 호소하는 치과 외래 환자를 72명을 대상으로 레이저 조사를 시행한 실험군(45명)과 모의 레이저 조사를 시행한 대조군(27명)으로 나누어 지각 과민 치아의 치경부에 냉자극 및 기계적 자극을 가하여 대상자가 느끼는 불편감을 NPS로 평가하였다. 치아의 통증역치 평가를 위하여 전기치수검사기(EPT)를 사용하였다. 각 치아에 대한 레이저 조사에는 pulsed Nd:YAG 레이저를 사용하였고 조사조건은 1.5W, 20Hz, 75mJ/pulse으로 4분간 비접촉식으로 시행하였다. 대상자의 반응을 레이저 조사 전과 직후, 1주 이내, 2주 이내 각각 평가하여 다음과 같은 결과를 얻었다. 1. 지각 과민 치아에 대한 Nd:YAG 레이저 조사는 지각 과민을 완화시켜 주었으며 대조군에 비해 그 효과가 현저하였다. 2. 심한 지각 과민을 호소하는 치아에 대한 위약 효과는 존재하였으나 중등도의 지각 과민을 호소하는 치아에 대한 위약효과는 배제할 수 있었다. 3. 지각 과민 치아에 대한 Nd:YAG 레이저 조사는 전기치수검사에 의한 통증역치에 영향을 주지 않았다. 4. 지각 과민 치아에 대한 Nd:YAG 레이저 조사의 효과는 최소 2주는 지속되었다. 따라서 지각 과민 치아에 대한 치료법의 하나로 Nd:YAG 레이저 조사가 임상적으로 유용할 것으로 사료된다.

• 대한치과의사협회지
• /
• 제23권5호통권192호
• /
• pp.365-365
• /
• 1985