• The korean journal of orthodontics
• /
• v.54 no.4
• /
• pp.199-209
• /
• 2024

The clinical application of aligners is accompanied by the ageing of the polymer appliances and the attachments used, which may result in inefficiency in reaching the predicted range of tooth movement, and release of compounds and microplastics in the oral cavity as a result of the friction, wear and attrition of the aligner and composite attachment. The purpose of this review is to present the mechanism and effects of in vivo ageing; describe the hydrolytic degradation of aligners and enzymatic degradation of composite attachments; examine the ageing pattern of aligners in vivo, under actual clinical scenarios; and identify a link to the discrepancy between predicted and actual clinical outcome. Lastly, strategies to deal with three potentially critical issues associated with the use of aligners, namely the necessity of weekly renewal, the dissimilar mechanical properties of aligner and attachment resulting in wear and plastic deformation of the aligner, and the development of integuments and biofilms with microbial colonization of the appliance, are discussed.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.323-328
• /
• 2015

PURPOSE. This in-vitro study was designed to evaluate retention forces, microleakage and plastic deformation of a prefabricated 2-implant bar attachment system (SFI-Bar, Cendres+$M{\acute{e}}taux$, Switzerland). MATERIALS AND METHODS. Two SFI implant-adapters were torqued with 35 Ncm into two implant analogues. Before the tube bars were finally sealed, the inner cavity of the tube bar was filled with liquid red dye to evaluate microleakage. As tube bar sealing agents three different materials were used (AGC Cem (AGC, resin based), Cervitec Plus (CP; varnish) and Gapseal (GS; silicone based). Four groups with eight specimens each were tested (GS, GS+AGC, AGC, CP). For cyclic loading, the attachment system was assembled parallel to the female counterparts in a chewing simulator. The mean retention forces of the initial and final ten cycles were statistically evaluated (ANOVA, ${\alpha}{\leq}.05$). RESULTS. All groups showed a significant loss of retention forces. Their means differed between 30-39 N initially and 22-28 N after 50,000 loading cycles. No significant statistical differences could be found between the groups at the beginning (P=.224), at the end (P=.257) or between the loss of retention forces (P=.288). Microleakage occurred initially only in some groups but after 10,000 loading cycles all groups exhibited microleakage. CONCLUSION. Long-term retention forces of the SFI-Bar remained above 20 N which can be considered clinically sufficient. The sealing agents in this study are not suitable to prevent microleakage.

• The korean journal of orthodontics
• /
• v.54 no.4
• /
• pp.229-238
• /
• 2024

Objective: The study aimed to assess the prevalence of dental malocclusion, orthodontic parameters, and parafunctional habits in children with developmental dyslexia (DD). Methods: Forty pediatric patients (67.5% boys and 32.5% girls, mean age: 11.02 ± 2.53 years, range: 6-15 years) with DD were compared with 40 age- and sex-matched healthy participants for prevalence of dental malocclusion, orthodontic parameters, and parafunctional habits. Dental examinations were performed by an orthodontist. Results: Pediatric patients with DD exhibited a significantly higher prevalence of Angle Class III malocclusion (22.5% vs. 5.0%, P = 0.024), deep bite (27.5% vs. 7.5%, P = 0.019), midline deviation (55.0% vs. 7.5%, P < 0.0001), midline diastemas (32.5% vs. 7.5%, P = 0.010), wear facets (92.5% vs. 15.0%, P < 0.0001), self-reported nocturnal teeth grinding (82.5% vs. 7.5%, P < 0.0001), nail biting (35.0% vs. 0.0%, P < 0.0001), and atypical swallowing (85.0% vs. 17.5%, P < 0.0001) compared to that in healthy controls. Conclusions: Pediatric patients with DD showed a higher prevalence of Class III malocclusion, greater orthodontic vertical and transverse discrepancies, and incidence of parafunctional activities. Clinicians and dentists should be aware of the vulnerability of children with dyslexia for exhibiting malocclusion and encourage early assessment and multidisciplinary intervention.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.273-284
• /
• 2007

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four esthetic restorative materials in an alkaline solution(0.1N NaOH). The composite resins studied were Composan LCM flow(Promedica, Germany). Clearfil ST(Kuraray medical, Japan), Durafi VS1(Heraeus Kulzer, U.S.A), Point 4(Kerr, U.S.A). The results were as follows : 1. The mass loss of each brand was $1.02{\sim}6.04%$ and highest value in Durafil VS$(6.04{\pm}0.29%)$. 2. The sequence of the degree of degradation layer depth was in descending order by Durafil VS, Clearfil ST, Point 4 and Composan LCM flow. There were significant differences between Point 4, Composan LCM flow and the others (p<0.001). 3. The sequence of the Si loss was in descending order by Clearfil ST, Durafil VS, Composan LCM flow and Point 4. There were significant differences among the materials (p<0.001). 4. On SEM, destruction of bonding between matrix and filler and on CLSM, the depth of degradation layer of specimen surface was observed. 5. The sequence of maximum wear depth was in descending order by Durafil VS, Composan LCM flow, Point 4 and Clearfil ST. There were no significant differences among the materials (p>0.001) 6. The correlation coefficient between Si loss and degradation layer depth (r=0.892, p<0.01) and Si loss and mass loss(r=0.736, p<0.01) were relatively high. These results indicate that hydrolytic degradation, wear and another factor may consider as evaluation factors of composite resins.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.143-149
• /
• 2018

The purpose of this study is to propose a management method to maintain the pleasant indoor air quality of the dental clinic by measuring and analyzing the indoor air quality of the dental clinic. The measurement was conducted in two rooms, a lobby where many residents stay in the reception room for waiting for medical treatment, and a VIP room where treatment activities are mainly performed. Measurement items are Temperature, Humidity, $CO_2$, CO, $NO_2$, $CH_2O$, VOC, $PM_{10}$ and measurement were taken on April 27, 2018. As a result of analyzing the temperature and humidity of the dental clinic, it was analyzed that the average indoor temperature was maintained at $25^{\circ}C$ and the humidity was kept at around 50%, maintaining proper indoor temperature and humidity environment. $CO_2$ was 855ppm in the VIP Room, which satisfied the maintenance standard. In the case of the lobby, it was analyzed to be 1,160ppm, which exceeded the maintenance standard and it is judged that the carbon dioxide generated by the respiration of the people staying in the lobby is the main reason. The mean concentration of formaldehyde in the VIP room was analyzed as $436{\mu}g/m^3$, exceeding the maintenance standard, and $2,100{\mu}g/m^3$ for the VOC exceeded the recommended standard. It was analyzed that the concentration was relatively higher due to the use of disinfectant and other drugs. The mean concentration of PM-10 in the lobby was analyzed as $65{\mu}g/m^3$ and it was analyzed that it satisfied the maintenance standard. To maintain a pleasant indoor air quality in a dental clinic it is necessary to minimize the effects of formaldehyde, VOC, $CO_2$ in the VIP rooms and lobby. For this purpose, the entire ventilation system and air purification system of the dental clinic should be installed. In case of the VIP room, local exhaust ventilation should be installed and workers should wear personal protective equipment.

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.51.1-51.13
• /
• 2021

Objectives: This study aimed to evaluate the effect of improper positioning single-peak and multi-peak lights on color change, microhardness of bottom and top, and surface topography of bulk fill and incremental composites after artificial aging for 1 year. Materials and Methods: Bulk fill and incremental composites were cured using multi-peak and single-peak light-emitting diode (LED) following 4 clinical conditions: (1) optimal condition (no angulation or tip displacement), (2) tip-displacement (2 mm), (3) slight tip angulation (α = 20°) and (4) moderate tip angulation (α = 35°). After 1-year of water aging, the specimens were analyzed for color changes (ΔE), Vickers hardness, surface topography (Ra, Rt, and Rv), and scanning electron microscopy. Results: For samples cured by single-peak LED, the improper positioning significantly increases the color change compared to the optimal position regardless of the type of composite (p < 0.001). For multi-peak LED, the type of resin composite and the curing condition displayed a significant effect on ΔE (p < 0.001). For both LEDs, the Vickers hardness and bottom/top ratio of Vickers hardness were affected by the type of composite and the curing condition (p < 0.01). Conclusions: The bulk fill composite presented greater resistance to wear, higher color stability, and better microhardness than the incremental composite when subjected to improper curing. The multi-peak LED improves curing under improper conditions compared to single-peak LED. Prevention of errors when curing composites requires the attention of all personnel involved in the patient's care once the clinical relevance of the appropriate polymerization reflects on reliable long-term outcomes.

• Journal of dental hygiene science
• /
• v.24 no.3
• /
• pp.152-159
• /
• 2024

Background: As interest in health increases, the number of people engaging in weight training to enhance muscle strength and muscle mass is on the rise. High-intensity weight training has been reported to induce tooth clenching habits, leading to tooth damage and temporomandibular joint (TMJ) abnormalities. Consequently, it is essential to investigate the impact of weight training accompanied by tooth clenching on oral health and to develop guidelines based on these findings. Methods: The study included male participants aged 25 years and older, comprising 15 non-exercisers and 15 professional fitness trainers who have been engaged in weight training for over 5 years. Data were collected using a self-administered questionnaire to gather information on age, exercise experience, total weight lifted in three major weight training exercises (deadlift, bench press, and squat), and teeth clenching habits. Additionally, examinations for tooth cracks and fractures, TMJ noise and pain, maximum mouth opening, occlusal force, and occlusal contact area were conducted. Results: Compared to non-exercisers, professional fitness trainers who have been engaged in weight training for over 5 years exhibited a higher prevalence of teeth clenching habits. While there were no significant differences between the two groups in occlusal contact area and the extent of tooth fractures, there were significant differences in occlusal force and the degree of tooth cracks. Furthermore, unlike joint noise and TMJ pain, the maximum mouth opening was significantly reduced in professional fitness trainers compared to non-exercisers. Conclusion: Our study suggests that the continuation of high-intensity exercise, which induces teeth clenching habits, may cause tooth damage and TMJ disorders.

• Applied Microscopy
• /
• v.40 no.1
• /
• pp.37-45
• /
• 2010

Captured wild specimens of the big white-toothed shrew, Crocidura lasiura were classified into three age classes by tooth wear and height of molars, and seasonal variations of breeding and reproductive organs were examined. Juveniles had not tooth wear in molars and height of the third molars were lower than the first and second molars, and had only non-breeding condition. Young adults had little tooth wear and the third molars reached to the first and second molars, and old adults had heavy tooth wear in molars, young adults and old adults had breeding or non-breeding condition according to the season. On the basis of histological examination, seasonal variations of breeding were confirmed that breeding condition of young and old adult males were continued from early February to early October although the breeding activity was the highest in April, that of females were continued from the end of March to October, males reached sexual maturity earlier than females. Whereas the breeding condition seems to cease for non-breeding season because of the deficiency of food resources, soil invertebrates. Young and old adult males of the breeding season had large testes with enlarged seminiferous tubules that were filled with numerous germ cells, and expanded caudal epididymides with a vast number of spermatozoa, and were more than 10.0 g in the body weight and 0.03 g in the testis and epididymis weight. The females of the breeding season were pregnant condition with 4~6 litters or had the Graafian follicles and the corpus lutea in the ovary, and were more than 9.6 g in the body weight.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.685-695
• /
• 2004

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four composite resins in an alkaline solution. The resistance to degradation was evaluated on the basis of mass loss(%), degradation depth(${\mu}m$), Si loss(ppm) and wear depth. The brands studied were Heliomolar flow, Filtek supreme, Point4, Tetric flow. The results were as follows: 1. The sequence of the mass loss was in descending order by Heliomolar flow, Filtek supreme, Point4, Tetric flow. There was significant differences among the materials except Heliomolar flow and Filtek supreme. 2. The sequence of the degree of degradation layer depth was in descending order by Filtek supreme, Heliomolar flow, Tetric flow, Point4. There were significant differences among the materials except Heliomolar flow and Tetric flow. 3. The sequence of Si loss was in descending order by Filtek supreme, Heliomolar flow, Point4, Tetric flow. There were significant differences among the materials except Point 4 and Tetric flow. 4. The sequence of maximum wear depth was in descending order by Heliomolar flow, Point4, Fillet supreme, Tetric flow and there was increasing wear depth on soaking in 0.1N NaOH solution. 5. When observed with SEM, destruction of bonding between matrix and filler was observed and when observed with CLSM, the depth of degradation layer of specimen surface was observed. There results indicate that wear and hydrolytic degradation could be considered to be evaluation factors of composite resins.

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.275-281
• /
• 2008

Background: This research aims to provide basic data for dental hygienists to implement the infection control after understanding the level of their implementation of infection control in case they have been trained of infection control or not. Method: The respondents in this research are the dental hygienists who worked in the Incheon or Gyeonggi areas between June 16 and July 5, 2008 and who attended complementary training conducted by the Seoul Branch of Korean Dental Hygienists Association in April 2008. A total of 191 questionnaires were distributed to them, and the frequency of the collected data was analyzed using SPSS WIN 12.0. Moreover, cross-tabulation analysis (${\chi}^2$) whose significance level was 0.05, was applied to the data in order to verify the statistical significance of the survey method. Result: There was significant difference in their practice to wear gloves and/or a mask, use a disposable apron and the time to change the apron depending upon the respondents' workplace. There was significant difference in the time to change their apron depending upon the respondents' time of service. 91.6% had been trained in the infection control: of them, 70.7% trained at their school. It was found that 68.6% of the respondents who had been trained in the infection control would wash their hands before treating a patient. 50.3% of the respondents who had been trained in the prevention of contamination would wear their gloves as needed for a basic treatment. Conclusion: Considering the above results of this research, it is concluded that it is necessary to provide practicing dental hygienists with many opportunities for systematic and practical training so that they may faithfully follow the guidelines for the prevention of contamination and to encourage hospitals to have a greater store of relevant facilities, equipment and supplies.