• 대한구순구개열학회:학술대회논문집
• /
• 대한구순구개열학회 1997년도 종합학술대회
• /
• pp.54-54
• /
• 1997

• 대한치과교정학회지
• /
• 제44권2호
• /
• pp.69-76
• /
• 2014

Objective: This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. Methods: Ten plaster models were duplicated using a selected standard master model and conventional impression, and 10 PUT models were duplicated using the 3D subtractive RP technique with an oral scanner. Six linear measurements were evaluated in terms of x, y, and z-axes using a non-contact white light scanner. Accuracy was assessed using mean differences between two measurements, and precision was examined using four quantitative methods and the Bland-Altman graphical method. Repeatability was evaluated in terms of intra-examiner variability, and reproducibility was assessed in terms of interexaminer and inter-method variability. Results: The mean difference between plaster models and PUT models ranged from 0.07 mm to 0.33 mm. Relative measurement errors ranged from 2.2% to 7.6% and intraclass correlation coefficients ranged from 0.93 to 0.96, when comparing plaster models and PUT models. The Bland-Altman plot showed good agreement. Conclusions: The accuracy and precision of PUT dental models for evaluating the performance of oral scanner and subtractive RP technology was acceptable. Because of the recent improvements in block material and computerized numeric control milling machines, the subtractive RP method may be a good choice for dental arch models.

• 대한치과의사협회지
• /
• 제48권3호
• /
• pp.205-217
• /
• 2010

Purpose The aim of this study is to evaluate the survival rates and analyze the stability of lateral approach and trans-crestal approach for maxillary sinus floor elevation of simultaneous implant placement. Materials and method 407 patients who have been treated in LivingWell dental hospital between 2003 to 2009 were selected. Lateral window technique, osteotome technique and sinus drill technique were used for sinus floor elevation procedure. A total of 714 implants-MP-1 HA coated implant(Tapered Screw $Vent^{TM}$, $Spline^{TM}$, Zimmer, USA), FBR surfaced implant(Pitt-$Easy^{TM}$, Oraltronics, Germany)-were placed in grafted maxillary sinus simultaneously. The autogenous bone or a combination with the allograft or alloplast was grafted into sinus. Sinus floor elevation was combined with vertical/horizontal onlay bone grafts to reconstruct the defect of alveolar ridge. Results The average preoperative height of the maxillary alveolar bone was 5.78mm(range: 0.4mm~12.5mm). 14 implants failed during the healing period(lateral approach: 4, trans-crestal approach: 10) and 3 implant failed after prosthetic loading(lateral approach: 2, trans-crestal approach: 1). The cumulative survival rate of implants after 6 years was 97.6%. Trans-crestal approach(97.4%) and lateral approach(97.9%) had similar survival rates. Conclusion The results indicate that the trans-crestal approach and lateral approach for maxillary sinus elevation is a acceptable method at atrophic maxillary posterior area.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권3호
• /
• pp.151-156
• /
• 2016

Objectives: To assess submental route intubation as an alternative technique to a tracheostomy in the management of the airway in cranio-maxillofacial trauma, along with an assessment of its morbidity and complications. Materials and Methods: Submental intubation was performed in 17 patients who had maxillofacial panfacial trauma and management was done under general anesthesia during a period of one year from 2013 to 2014 at Departments of Oral and Maxillofacial Surgery and Dentistry, the Malankara Orthodox Syrian Church Medical College, Kochi, India. Results: In all 17 cases, the technique of submental intubation was found to be simple and reliable. Hypertrophic scars were noted in three cases, orocutaneous fistula and mucocele in one case each. All these complications were managed comfortably without significant morbidity to the patient. Conclusion: Submental intubation is a good technique that can be used regularly in the management of the airway in cranio-maxillofacial trauma, but with some manageable complications.

• Journal of Korean Dental Science
• /
• 제14권2호
• /
• pp.79-89
• /
• 2021

Purpose: The technique introduced in this study describes a technique for surface treatment that applies a photocuring resin to the surface of an interim crown fabricated by three-dimensional (3D) printing without a conventional polishing method. The purpose of this study was to evaluate marginal and internal fit and the intaglio surface trueness of interim crowns after surface treatment of 3D-printed crowns for clinical application. Materials and Methods: An interim crown was fabricated using a 3D printer with digital light-processing technology, and the surface support was removed. After the posttreatment process, the resin was thinly applied to the surface of the interim crown and polymerized to solve the esthetic problem of the surface without the conventional polishing process. In addition, the marginal and internal fits were measured to verify the clinical use of this technique, and the trueness was evaluated to confirm the deformation of the inner surface according to the technical application of the outer surface of the interim crown. The difference before and after the evaluation by a statistical method was verified using an independent t-test (α=0.05). Result: There was no significant difference in the marginal and internal fit before and after the application of this technique (P>0.05). There was no significant difference in intaglio surface trueness before and after the application of this technique (P=0.963). Conclusion: There was no change in the marginal and internal fit or in intaglio surface trueness of the interim crowns to which this technology was applied. This surface treatment technique is a more convenient method for interim crowns fabricated using 3D-printing technology without the conventional polishing process.

• 대한치과의사협회지
• /
• 제24권7호통권206호
• /
• pp.593-603
• /
• 1986

Segmented Arch technique은 edgewise mechanics의 한 줄기로서, 미국 코네티컬 주립대학 교정과 과장인 Dr. Burstone에 의하여서 1950년대 이래로 꾸준히 개발되어온 생역학적인 개념(biomechanical concept)을 가장 효율적으로 치료에 적용하고자 함에 있다고 하겠다. 저자는 Segmented arch technique의 최근의 경향과 치료이론 및 술식을 다음의 순서로 4회에 걸쳐서 소개하고자 한다. 1. 전치의 Intrusion에 의한 과개교합의 치료법 -Deep Overbite Correction 2. Space closure - 수평방향의 치아이동방법 3. Root movement의 방법 - Torque mechanics 4. 구치를 Upright 시키는 방법 - Tip back mechanics.

• 대한치과의사협회지
• /
• 제24권8호통권207호
• /
• pp.698-702
• /
• 1986

Segmented Arch technique 은 edgewise mechanics의 한 줄기로서, 미국 코네티컬 주립대학 교정과 과장인 Dr. Burstone에 의하여 1950년대 이래로 꾸준히 개발되어온 치료술식으로서 그 특징을 한마디로 요약하면 생역학적인 개념(biomechanical concept)을 가장 효율적으로 치료에 적용하고자 함에 있다고 하겠다. 저자는 Segmented arch technique의 최근의 경향과 치료이론 및 술식을 다음의 순서로 4회에 걸쳐서 소개하고자 한다. 1. 전치의 Intrusion에 의한 과개교합의 치료법 -Deep Overbite Correction 2. Space closure - 수평방향의 치아이동방법 3. 치근의 이동방법 - Root movement 4. 구치를 Upright 시키는 방법 - Tip back mechanics

• 대한치과의사협회지
• /
• 제24권10호통권209호
• /
• pp.870-876
• /
• 1986

Segmented Arch technique 은 edgewise mechanics의 한 줄기로서, 미국 코네티컬 주립대학 교정과 과장인 Dr. Burstone에 의하여 1950년대 이래로 꾸준히 개발되어온 치료술식으로서 그 특징을 한마디로 요약하면 생역학적인 개념(biomechanical concept)을 가장 효율적으로 치료에 적용하고자 함에 있다고 하겠다. 저자는 Segmented arch technique의 최근의 경향과 치료이론 및 술식을 다음의 순서로 4회에 걸쳐서 소개하고자 한다. 1. 전치의 Intrusion에 의한 과개교합의 치료법 -Deep Overbite Correction 2. Space closure - 수평방향의 치아이동방법 3. 치근의 이동방법 - Root movement 4. 구치를 Upright 시키는 방법 - Tip back mechanics

• 구강회복응용과학지
• /
• 제33권3호
• /
• pp.223-229
• /
• 2017

단일 치아의 인상채득을 위해서는 바이트 트레이를 이용한 폐구인상법이 선호된다. 그러나 임플란트 인상채득을 위해서는 단일치와 다수치 구분 없이 편악 트레이를 이용한 개구인상법이 주로 사용되고 있다. 바이트 트레이를 이용하는 폐구인상법은 시간이 절약되고 재료가 적게 들며, 모형의 교합기 부착 시 상하악 악간 위치 관계 오차 발생 확률이 적다. 본 증례에서는 2 가지 종류의 폐구인상용 코핑을 이용해 바이트 트레이로 인상채득 후 단일 임플란트 고정성 보철물을 제작함에 있어 만족할 만한 결과를 얻어 보고하고자 한다.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.287-293
• /
• 2017

PURPOSE. To compare the dimensional accuracy of three impression techniques- a separating foil impression, a custom tray impression, and a stock tray impression. MATERIALS AND METHODS. A machined mandibular complete-arch metal model with special modifications served as a master cast. Three different impression techniques (n = 6 in each group) were performed with addition-cured silicon materials: i) putty-wash technique with a prefabricated metal tray (MET) using putty and regular body, ii) single-phase impression with custom tray (CUS) using regular body material, and iii) two-stage technique with stock metal tray (SEP) using putty with a separating foil and regular body material. All impressions were poured with epoxy resin. Six different distances (four intra-abutment and two inter-abutment distances) were gauged on the metal master model and on the casts with a microscope in combination with calibrated measuring software. The differences of the evaluated distances between the reference and the three test groups were calculated and expressed as mean (${\pm}SD$). Additionally, the 95% confidence intervals were calculated and significant differences between the experimental groups were assumed when confidence intervals did not overlap. RESULTS. Dimensional changes compared to reference values varied between -74.01 and $32.57{\mu}m$ (MET), -78.86 and 30.84 (CUS), and between -92.20 and 30.98 (SEP). For the intra-abutment distances, no significant differences among the experimental groups were detected. CUS showed a significantly higher dimensional accuracy for the inter-abutment distances with -0.02 and -0.08 percentage deviation compared to MET and SEP. CONCLUSION. The separation foil technique is a simple alternative to the custom tray technique for single tooth restorations, while limitations may exist for extended restorations with multiple abutment teeth.