• Journal of Korean Dental Science
• /
• v.3 no.1
• /
• pp.11-16
• /
• 2010

Objective : This prospective study sought to verify the stability of three types of short implants measuring 7mm or less. Materials and methods : Implants measuring 7mm or less were placed in patients at multicenter dental clinics in Korea, China, Taiwan, and Singapore. Initial stability, intraoperative and postoperative complications, crestal bone loss, and survival rate of the implant were prospectively evaluated. Results : The primary stability of a 6-mm implant was lower than that of a 7-mm implant. The marginal bone loss of short implants measuring less than 7mm was minimal. Complications such as wound dehiscence, implant mobility, and peri-implant mucositis developed, and these were associated with initial implant failure. The short-term survival rate of 6-mm implant was 93.7%, and that of 7-mm implant, 96.6%. Conclusion : Short implant for the mandible with insufficient height for the residual ridge can be selectively used. Poor primary stability and wound dehiscence can cause osseointegration failure and alveolar bone loss.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.5
• /
• pp.260-266
• /
• 2019

Objectives: Dental implants shorter than 8 mm, called short dental implants (SDIs), have been considered to have a lower success rate than standard length implants. But recent studies have shown that SDIs have a comparable success rate, and implant diameter was more important for implant survival than implant length. Also, SDIs have many advantages, such as no need for sinus lifting or vertical bone grafting, which may limit use in medically compromised patients. Materials and Methods: In this study, 33 patients with 47 implants 7-mm long were examined over the last four years. All patients had special medical history and were categorized into 3 groups: systemic disorders, such as diabetes mellitus (controlled or uncontrolled), mental disability, and uncontrolled hypertension; oral cancer ablation with reconstruction, with or without radiotherapy; diverse osteomyelitis, such as osteoradionecrosis and bisphosphonate-related osteonecrosis of the jaw. Most of these patients have insufficient residual bone quality due to mandible atrophy or sinus pneumatization. Results: The implant diameters were 4.0 (n=38), 4.5 (n=8), and 5.0 mm (n=1). Among the 47 implants placed, 2 implants failed before the last followup. The survival rate of 7-mm SDIs was 95.74% from stage I surgery to the last follow-up. Survival rates did not differ according to implant diameter. The mean marginal bone loss (MBL) at 3 months, 1 and 2 years was significantly higher than at implant installation, and the MBL at 1 year was also significantly higher than at 3 months. MBL at 1 and 2 years did not differ significantly. Conclusion: Within the limitations of the present study, the results indicate that SDIs provide a reliable treatment, especially for medically compromised patients, to avoid sinus lifting or vertical bone grafting. Further, long-term follow-up is needed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.1
• /
• pp.36-43
• /
• 2011

Purpose: This study evaluated the pharyngeal airway space changes in CT images in patients receiving bilateral sagittal split osteotomy (BSSRO) for the surgical correction of mandibular prognathism. Methods: A total of 22 patients with mandibular prognathism were treated using BSSRO. Computed tomography was performed 1 month (T0) before surgery and, 1 month after surgery (T1). The anteroposterior length (AP), lateral width (LAT) and cross-sectional area (AREA) at the level of soft palate (C2) and base of the tongue (C3) were measured using CT images. Results: The mean amount of mandibular setback was 7.41 mm (${\pm}$3.46 mm). All the AP, LAT and AREA at the C2 and C3 level were decreased significantly 1 month after surgery (P<0.001). As the amount of mandibular setback was increased, the AP, LAT and AREA levels at the level of C2 and C3 had decreased. In addition, the reduction of the AREA at the C3 level was associated with the amount of mandibular setback (P<0.05). Conclusion: A significant decrease in pharyngeal airway space was observed 1 month after the operation. The cross-sectional area at the level of base of tongue was decreased with increasing amount of mandibular setback.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.49 no.1
• /
• pp.53-54
• /
• 2023

• The Journal of the Korean dental association
• /
• v.54 no.1
• /
• pp.67-83
• /
• 2016

Ebola virus disease is a lethal viral hemorrhagic fever that has been boiling in sub-Saharan Africa since 1970s. Last year, The Ebola virus epidemic that has spread not only mainly in West Africa, but also in locals such as USA, Europe and the Antipodes via infected travelers, was brought up. Human-to-human transmission of Ebola virus disease is known only through direct contact with the blood, secretions, tissues or other bodily fluids, including saliva. Although there has not been reported infection cases in the dental healthcare settings, the fact that the infection of the Ebola virus may be made from human secretions such as saliva suggests that there is a high risk of infection for the Ebola virus of dental healthcare workers. Therefore, it is important dental healthcare workers to identify infection-suspected patients through the oral findings for infection prevention. This article will review the oral signs and symptoms of Ebola virus disease and discuss the pathogenesis, treatment and prevention. Furthermore, Infection control guidelines for oral healthcare workers are also proposed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.4
• /
• pp.173-180
• /
• 2014

Objectives: The purpose of this study was to investigate the neurogenic differentiation of human dental pulp stem cells (DPSCs), periodontal ligament stem cells (PDLSCs), and stem cells from apical papilla (SCAP). Materials and Methods: After induction of neurogenic differentiation using commercial differentiation medium, expression levels of neural markers, microtubule-associated protein 2 (MAP2), class III ${\beta}$-tubulin, and glial fibrillary acidic protein (GFAP) were identified using reverse transcriptase polymerase chain reaction (PCR), real-time PCR, and immunocytochemistry. Results: The induced cells showed neuron-like morphologies, similar to axons, dendrites, and perikaryons, which are composed of neurons in DPSCs, PDLSCs, and SCAP. The mRNA levels of neuronal markers tended to increase in differentiated cells. The expression of MAP2 and ${\beta}$-tubulin III also increased at the protein level in differentiation groups, even though GFAP was not detected via immunocytochemistry. Conclusion: Human dental stem cells including DPSCs, PDLSCs, and SCAP may have neurogenic differentiation capability in vitro. The presented data support the use of human dental stem cells as a possible alternative source of stem cells for therapeutic utility in the treatment of neurological diseases.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.6
• /
• pp.1232-1240
• /
• 2012

Objectives : In this study, the treatment method for some college students, due to the misuse of non-therapeutic molding technique non-therapeutic procedure is applied in orthodontics or jaw surgery and therapeutic purposes, such as to properly recognize and to investigate whether. Methods : In this study used, 4 questions, the questionnaire general characteristics (such as gender, major, whether the treatment experience and purpose) Orthodontic and knowledge about the jaw surgery (Corrective jaw surgery hope and reason, or jaw surgery benefits, side effects, etc.) 6 items, calibration and recognition jaw surgery on seven items 17 items was constructed. Results : Of the perception of the majors of the respondents according to the presence or absence of a non-therapeutic procedure for calibration or jaw surgery the correct way, and the purpose appeared to know roughly majors and all students majoring statistically significant (p<.001). The degree of recognition for non-therapeutic procedures according to the gender of the respondents' facial aesthetic improvement, and the most common reason, you want to make a non-therapeutic procedure, correction or contrast, I've found that looks supremacist influence on the non-therapeutic procedure or roughly know the correct way, and jaw surgery for the purpose that appeared to be statistically significant (p<.05). Conclusions : Non-therapeutic procedure for the interest and knowledge to promote oral health as well as esthetic improvements to the original non-therapeutic procedure for therapeutic purposes and how to deliver education and it is very important.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.5
• /
• pp.292-296
• /
• 2022

Objectives: During Le Fort I osteotomy, the separation of the pterygomaxillary junction (PMJ) is a difficult procedure for most surgeons because it is invisible. In this process, damage to the posterior structures constituting the sinus or those adjacent to it, including the maxillary sinus posterior wall and pterygoid plate, may occur. We would like to investigate the effects of this on the inside of the maxillary sinus after surgery and whether there are complications. Materials and Methods: One-hundred patients who underwent Le Fort I osteotomy from 2013 to 2020 using cone-beam computed tomography images were classified into two groups (clean-cut type and fractured type) according to the PMJ cutting pattern. In addition, the mucosal thickness in the maxillary sinus was divided into preoperative, postoperative three months, one year, and the change over the course of surgery was evaluated retrospectively. Results: Of the total 100 cases, the clean-cut type numbered 28 cases and the fractured type totaled 72 cases. Among the fracture types, part of the sinus wall and the pterygoid plate were broken in 69 cases, and the maxillary sinus posterior wall was detached in three cases. There was no statistically significant difference in sinus mucosal thickening between the clean-cut type and fractured type of the PMJ, three months and one year after surgery between the two groups. However, there was a significant difference in sinus mucosal thickness at postoperative one year in the case where a partial detachment of the maxillary sinus posterior wall occurred compared to not. Conclusion: Even if there is some damage to the structures behind the PMJ, it may not be reasonable to spend some time on the PMJ separation process considering the overall postoperative complications, if there is no significant difference inside the sinus, or increased probability of postoperative complications.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.5
• /
• pp.395-405
• /
• 2014

PURPOSE. This study aims to investigate the degree of subjective pain and the satisfaction of patients who have undergone an implant treatment using a computer-guided template. MATERIALS AND METHODS. A survey was conducted for 135 patients who have undergone implant surgery with and without the use of the computerguided template during the period of 2012 and 2013 in university hospitals, dental hospitals and dental clinics that practiced implant surgery using the computer-guided template. Likert scale and VAS score were used in the survey questions, and the independent t-test and One-Way ANOVA were performed (${\alpha}=.05$). RESULTS. The route that the subjects were introduced to the computer-guided implant surgery using a surgical template was mostly advices by dentists, and the most common reason for which they chose to undergo such surgery was that it was accurate and safe. Most of them gave an answer that they were willing to recommend it to others. The patients who have undergone the computer-guided implant surgery felt less pain during the operation and showed higher satisfaction than those who have undergone conventional implant surgery. Among the patients who have undergone computer-guided implant surgery, those who also had prior experience of surgery without a computer-guided template expressed higher satisfaction with the former (P<.05). CONCLUSION. In this study, it could be seen that the patients who have undergone computer-guided implant surgery employing a surgical template felt less pain and had higher satisfaction than those with the conventional one, and the dentist's description could provide the confidence about the safety of surgery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.43.1-43.5
• /
• 2019

Background: Reconstructive surgery is often required for tumors of the oral and maxillofacial region, irrespective of whether they are benign or malignant, the area involved, and the tumor size. Recently, three-dimensional (3D) models are increasingly used in reconstructive surgery. However, these models have rarely been adapted for the fabrication of custom-made reconstruction materials. In this report, we present a case of maxillary reconstruction using a laboratory-engineered, custom-made mesh plate from a 3D model. Case presentation: The patient was a 56-year-old female, who had undergone maxillary resection in 2011 for intraoral squamous cell carcinoma that presented as a swelling of the anterior maxillary gingiva. Five years later, there was no recurrence of the malignant tumor and a maxillary reconstruction was planned. Computed tomography (CT) revealed a large bony defect in the dental-alveolar area of the anterior maxilla. Using the CT data, a 3D model of the maxilla was prepared, and the site of reconstruction determined. A custom-made mesh plate was fabricated using the 3D model (Okada Medical Supply, Tokyo, Japan). We performed the reconstruction using the custom-made titanium mesh plate and the particulate cancellous bone and marrow graft from her iliac bone. We employed the tunneling flap technique without alveolar crest incision, to prevent surgical wound dehiscence, mesh exposure, and alveolar bone loss. Ten months later, three dental implants were inserted in the graft. Before the final crown setting, we performed a gingivoplasty with palate mucosal graft. The patient has expressed total satisfaction with both the functional and esthetic outcomes of the procedure. Conclusion: We have successfully performed a maxillary and dental reconstruction using a custom-made, pre-bent titanium mesh plate.