• 대한치과보철학회지
• /
• 제41권1호
• /
• pp.61-70
• /
• 2003

The purpose of this study was to investigate the contact angles and wettability of conventional dental stones and improved dental stones and newly developed dental stones on several impression materials. Materials included in this study were several dental stones and newly developed dental stone ; 2 type III stones (Snow Rock, New Diastone), 6 type IV stones(Crystal Rock, Vel Mix, Fuji Rock, Tuff Rock, Resin Rock and newly developed dental stone) and 1 type V stone (Die Keen). Contact angles on the impression materials were measured with contact angle measuring device. Ten specimens for each material, total 180 specimens were made on void entrapment model. The two impression materials (Handae, GC) were used to produce 9 groups of die stone casts form void entrapment model. Voids in the stone casts were counted under a stereoscopic microscope. The grad for the reproduction ability of each materials on the void entrapment model was calculated from the casts by one examiner. From the experiment, the following results were obtained : 1. The newly developed stones showed smallest contact angle. Type III dental stone had larger contact angles than type IV and V stones. Contact angle was much affected by the impression materials. 2. Resin containing die materials such as Tuff Rock and Resin Rock had smallest void number than any other groups. 3. In comparing reproduction parameters, Tuff Rock and Resin Rock presented superior results, while Vel Mix showed lowest reproduction ability.

• 대한치과보철학회지
• /
• 제40권2호
• /
• pp.184-192
• /
• 2002

The purpose of this study was to investigate the abrasion resistance and surface roughness of conventional dental stones and improved dental stones and newly developed dental stones. Materials included in this study were several dental stones and newly developed dental stone; 2 type III. 6 type IV (including newly developed dental stone). 1 type V Ten specimens for each material, total ninety specimens were made. Each specimen was subjected to 50 complete cycle abrasion under constant load 0.42N at speed or 6mm per sec. The depth after abrasion test was measured for each specimen. Surface roughness before and after abrasion test was compared. The results were as follows ; 1. The resin containing die materials such as Tuff Rock and Resin Rock had superior abrasion resistance. 2. Type IV, V dental stone exhibited greater abrasion resistance than Type III dental stone. 3. The results or the surface roughness showed similar pattern with the abrasion resistance.

• Restorative Dentistry and Endodontics
• /
• 제46권3호
• /
• pp.34.1-34.9
• /
• 2021

Objectives: This study aimed to assess the presence of pulp stones through an examination of cone beam computed tomography images and correlate their prevalence with age, sex, dental arch and side, tooth type, and restoration type and depth. Materials and Methods: Cone beam computed tomography images obtained from 673 patients and archival data on 11,494 teeth were evaluated. The associations of pulp stones with age, sex, dental arch and side, tooth type, and restoration type and depth were noted. All the measurements were subjected to a χ² test and one sample χ² test (p < 0.05). Results: In the study group, 163 (24.2%) patients and 379 (3.3%) teeth had at least one pulp stone. The pulp stone frequency in those aged 30-39 years was significantly greater than in those aged 18-29 and ≥ 60 years, and the frequency was higher in females than in males (p < 0.05). The highest prevalence of pulp stones was found in maxillary dental arches and molar teeth (p < 0.05). Pulp stones were significantly more common in medium-depth restorations (p < 0.05). Conclusions: Maxillary molar teeth, medium-depth restorations, individuals aged 30-39 years and females had a greater percentage of pulp stones.

• 대한치과기공학회지
• /
• 제35권4호
• /
• pp.321-332
• /
• 2013

Purpose: This study was examined the characteristics of bacteria isolated from the dental stone that is made ??in the dental laboratory. Methods: 104 dental stones samples were collected from the 4 dental laboratory. Characteristics of bacteria were investigated by microorganism isolation culture method using a Blood Tryptic Soy Agar(TSA) medium. Results: The detected various bacteria was confirmed as pathogenic bacteria, non-pathogenic bacteria and natural bacteria. The isolated bacterial number was confirmed $2.9{\times}10^3CFU$ and maxium bacterial number of $3.0{\times}10^4CFU$. Conclusion: Therefore, infection prevention education is required, it must be to live up the hand-washing and wear protective clothing to protect themselves when working in a dental laboratory.

• 대한치과의사협회지
• /
• 제11권7호
• /
• pp.455-458
• /
• 1973

The authors have treated 2 patients with submaxillary gland stones involving sialadenitis. The 2 cases were observed in the right submaxillary gland of 51 years old woman and left submaxillary gland of 54 years old man. The 2 patients with salivary stones were reated by toatal sialolithectomy and glandectomy. The enucleated sialolithes were 18㎜ x 12㎜ and 8㎜ x 6㎜ in size.

• 한국임상수의학회지
• /
• 제32권1호
• /
• pp.69-72
• /
• 2015

This study was performed to differentiate calcium oxalate and struvite canine urinary stones using computed tomography. A total of 38 urinary stones (8 calcium oxalate and 30 struvite) were scanned using a computed tomography scanner. These urinary stones (10-15 mm diameter) extracted surgically without fragmentation were obtained from the different individual patients. The stone's Hounsfield units(HU) values, heterogenicity, and roughness of surface were evaluated to differentiate calcium oxalate and struvite. The HU values of calcium oxalate were significantly higher than those of struvite. A receiver operator characteristic (ROC) curve revealed 1272 as the best threshold value to distinguish calcium oxalate from struvite (ROC curve AUC 0.87, p < 0.0014). The heterogenicity of calcium oxalate and struvite significantly differed on bone and dental window setting (p < 0.0001). There was no significant difference between calcium oxalate and struvite in roughness of surface. On computed tomographic images, bone and dental windows setting were useful for evaluation of heterogenicity between calcium oxalate and struvite. The HU value and heterogenicity are highly promising factor that can distinguish calcium oxalate and struvite with reasonable accuracy.

• Imaging Science in Dentistry
• /
• 제48권3호
• /
• pp.201-212
• /
• 2018

Purpose: The aim of this study was to compare cone-beam computed tomography (CBCT) and digital panoramic radiography (DPR) for the detection of pulp stones. Materials and Methods: DPR and CBCT images of 202 patients were randomly selected from the database of our department. All teeth were evaluated in sagittal, axial, and coronal sections in CBCT images. The systemic condition of patients, the presence of pulp stones, the location of the tooth, the group of teeth, and the presence and depth of caries and restorations were recorded. The presence of pulp stones in molar teeth was compared between DPR and CBCT images. Results: Pulp stones were identified in 105 (52.0%) of the 202 subjects and in 434 (7.7%) of the 5,656 teeth examined. The prevalence of pulp stones was similar between the sexes and across various tooth locations and groups of teeth (P>.05). A positive correlation was observed between age and the number of pulp stones(${\rho}=0.277$, P<.01). Pulp stones were found significantly more often in restored or carious teeth (P<.001). CBCT and DPR showed a significant difference in the detection of pulp stones(P<.001), which were seen more often on DPR than on CBCT. Conclusion: DPR, as a 2D imaging system, has inherent limitations leading to the misinterpretation of pulp stones. Restored and carious teeth should be carefully examined for the presence of pulp stones. CBCT imaging is recommended for a definitive assessment in cases where there is a suspicion of a pulp stone on DPR.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제50권2호
• /
• pp.94-102
• /
• 2024

The exact mechanism of sialolith formation has yet to be determined. Recurrence of sialolithiasis is rare, affecting only 1%-10% of patients. The current study presents a case of recurrent stones that occurred twice on the right submandibular gland 6 months postoperative and 7 months after reoperation in a 48-year-old female patient. The stones were analyzed using histology, scanning electron microscopy, energy dispersive spectroscopy, and transmission electron microscopy (TEM). The first stone showed a three-layered structure with a poorly mineralized peripheral multilayered zone, highly mineralized middle layer, and the central nidus. The stones were composed of Ca, C, O, Cu, F, N, P, Si, Zn, and Zr. In TEM, compact bi-layered bacterial cell membrane was found on the peripheral layer and the central nidus of the stone as well as exosomes in the central nidus. The results demonstrated the essential components of sialolith formation, including bacteria, inflammatory exosomes, and exfoliated salivary epithelial cells that cooperatively underwent the pathogenetic progresses of central nidus formation, induction of compact zone calcification of the middle layer, and repeated subsequent deposition in the peripheral multilayer zone. The rapid recurrence could have resulted from residual pieces of a sialolith acting as the nidus of bacterial infection.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권1호
• /
• pp.44-49
• /
• 2012

Introduction: Sialolithes are initiated by localized deposition of calcified material in the salivary glands. And that may even cause various symptom especially swelling and pain. This study purposes to collect statistical data of sialolithiasis for clinical analysis. Materials and Methods: Among forty seven patients who have visited Seoul National University Dental Hospital during 2004-2009, patients' age, sex, location and size of stone, radiodensity of stone, symptom, surgical procedure were investigated. Statistical correlation between size, location, symptom was evaluated. Chemical composition was analyzed for 3 sialolithes. Results: The average age was 41.4 years. Sialolithiasis had slight female predilection (57.4%). Most cases occurred in the submandibular glands (91.5%). And most cases had radiopaque features (95.8%). The average size was 7.17 mm. The most frequent location of the stones were the duct orifice and the submandibular gland hilum (16 cases in each), followed by the middle part of the duct (n=8), the intraglandular area (n=4), and the proximal part of the duct (n=3). Eleven cases were asymptomatic. Thirty six cases had complaints of pain, swelling, hardness, and decrease in saliva flow (multiple symptoms). Various methods of surgery was performed. Two cases were self-removed. Thirty seven cases underwent procedure involving stone removal alone. Six cases underwent gland extirpation, and two cases underwent ductoplasty. Conclusion: There was no statistical correlation between size, location, and symptoms. Sialolith was composed of Ca (58.5-69.3%), P (30.7-35.7%), organic material, and trace inorganic material.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.471-477
• /
• 1999

A new stress, load and displacement controlled direct shear apparatus has recently been developed at the Hyundai Institute of Construction Technology This direct shear apparatus is capable of testing of rock joint under constant normal stiffness, constant normal stress or constant normal load boundary conditions. This paper describes this direct shear apparatus and illustrates results of shear tests at constant normal stress condition, constant normal load condition and constant normal stiffness condition with dental stones which have a same joint roughness and unconfined compressive strength.