• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.53-76
• /
• 1990

The purpose of this study was to evaluate the tensile bond strength of adhesive resins to successively recast Rexillium III and Degudent-U. Recasting was done 4times successively. Specimen $A_1$, were cast by new metal, and $A_2$ by surpus of $A_1$, $A_3$ by surplus of, $A_2$ $A_4$ by surplus of $A_3$, $A_5$ by surplus of $A_4$ plus 50% new metal. The types of surface treatment for resinbonded restoration in this experiment were electrolytic etching by OXY-ETCH(Oxy dental products, Inc., Hillside, New Jersey, U.S,A.), aluminum oxide blasting, anodic oxidation by EZ-OXISOR( Towagiken Co., Kyoto, Japan), electrotinplating by Kura Ace(Kuralay Co., Kyoto, Japan). Three kinds of cementing resin used in this study were Comspan(K.P. Cauil Co, Milford Delaware, U.S.A.), Super Bond C&B(Sun-Medical Co. Ltd., Kyoto,Japan), Panavia EX(Kuralay Co., Ltd., Osaka, Japan). Tensile bond strength was measured by Instron Universal testing machineModel 1125) and all the specimen were observed with SEM(JEOL, JSM-T2000) and mode of bond failure were recorded. The obtained results were as follows : 1. In electrolytic etched group, tensile bond strength was decreassed when recast alloy was used, and tensile bond strength of Compan and panavia EX were not significantly different(P>0.05). 2. In remaining group treated by aluminum oxide blasting, EZ-OXIOR, Kura Ace, tensile bond strength were not changed when recast alloy were used, and tensile bond strength of SuperBond(C&B and Panavia EX were not significantly different(P>0.05). 3. IN SEM evaluation, electrolytic etched group and electrotinplated group exhibited different image when recast alloy was used, and remaining groups treated by aluminum oxide blasting, EZ-OXISOR exhibited the same. 4. IN observation of bond failure, electrolytic etched group exhibited adhesive failure and remaing groups treated by aluminium oxid blasting, EZ-OXISOR, Kura Ace exhibited adhesive and cohesive failure.

• 대한소아치과학회지
• /
• 제35권3호
• /
• pp.562-570
• /
• 2008

법랑질 형성부전증(amelogenesis imperfecta)은 전신질환과 관련없이 법랑질에 결함을 나타내는 유전질환이다. 법랑질 형성부전증은 발현되는 증상과 유전 양상에 따라 14가지의 아류형으로 분류된다(Witkop, 1989). 임상적으로는 크게 형성부 전형(hypoplastic type), 저석회화형(hypocalcified type), 성숙부전형(hypomaturation type)으로 나누어진다. 하지만 이들은 때로 혼재된 양상으로 나타난다. 법랑질 형성부전증은 법랑질이 질적으로나 양적으로 부족하며 치수 석회화, 치근 형태 이상, 맹출 장애와 영구치의 매복, 점진적인 치근의 흡수, 선천적 치아 결손, 그리고 전치부나 구치부의 개교합 등의 문제점을 나타낸다. 첫 번째 증례는 만 1세 4개월때 유전치부의 치아색 이상을 주소로 내원한 환자로 그 후 모든 유치 및 영구치에서 법랑질 형성부전증이 관찰되어 수복 술식, 교정적 치료 및 최근 보철 치료까지 완료하였다. 두 번째 증례는 만 9세 3개월된 환아로 유치 및 영구치에서 법랑질 형성부전증이 관찰되었다. 수복 치료가 시행되었고 보철 치료는 성장 완료 후 시행하기로 계획하였다. 본 증례들을 통하여 법랑질 형성부전증은 유치 및 영구치 모두에 발생할 수 있으며 장기간의 치료 및 관리가 필요하다는 것을 알 수 있었다.

• 대한소아치과학회지
• /
• 제30권2호
• /
• pp.204-209
• /
• 2003

9세된 남아가 불안정한 교합을 주소로 내원하였다. 환아의 제1대구치는 치아우식증으로 광범위하게 치관이 파괴되어 환아는 자신의 교두감합위를 찾지 못해 하악을 변위시키면서 교합을 하였고 폐구시마다 동일한 위치로 다물지를 못하였다. 임상검사와 방사선 검사를 통하여 제1대구치에 크라운 수복을 하여 안정적인 교합으로 교합재건을 해주기로 하였다. 치료에 앞서 안정위로 유도하여 환아에게 안정위로 폐구하도록 교육하였고, 근첨형성술(apexification)을 포함한 근관치료와 interocclusal space확보를 위한 치관연장술과 수직고경의 거상을 계획하였다. 근관치료와 치관연장술 후 보철물 제작을 위해 치아를 삭제하고 안정위를 기준으로 수직고경을 증가시켜 임시치관을 제작 및 장착하고 1개월 동안 적응여부를 관찰하였다. 1개월 후 악관절장애등의 증상이 없어 크라운을 제작하였고, 이를 다시 임시장착하고 1개월동안 관찰하여 아무런 증상이나 불편감이 없어 최종접착을 하였다. 크라운을 최종장착한지 4개월 후 검사에서 환아는 안정적인 교합을 형성해가고 있었고, 크라운을 처음 장착했을 때 보였던 전치부 개방교합도 개선되어 정상적인 수평, 수직피개 교합을 보이고 있었다.

• 대한소아치과학회지
• /
• 제39권4호
• /
• pp.390-396
• /
• 2012

저위교합이란 치아가 출은 이후 유착 등의 원인으로 맹출이 정지되어 주위조직이 정상적으로 성장함에 따라 정상교합보다 낮아진 상태를 말한다. 저위교합을 방치하는 경우 이환치의 만기잔존과 대합치의 정출 및 인접치의 경사에 따른 공간상실, 교합압과 식편압입으로 인한 인접치의 치주 조직 파괴와 치아우식 감수성의 증가, 계승치의 맹출경로 변위 또는 매복과 같은 문제점이 발생할 수 있으므로 정기검진을 통한 진단과 이에 따른 적절한 치료가 필요하다. 저위교합을 보이는 유구치의 치료방법으로는 후속 영구치의 유무, 저위교합의 발생 시기 및 진단 시기, 저위교합의 정도 등에 따라서 주기적인 관찰, 보존적 접근 방법, 수복치료, 교정적 방법을 통한 공간확장술과 발치 등이 있다. 본 증례에서는 상악 제2유구치의 저위교합 및 제2소구치 치배의 변위를 보이는 3명의 환아를 대상으로 가철성 교정장치를 이용한 공간확장술 및 유구치의 발치를 시행함으로써 변위되었던 제2소구치 치배의 정상 맹출을 유도하였다.

• 대한소아치과학회지
• /
• 제40권4호
• /
• pp.335-341
• /
• 2013

매복된 상악 견치는 제 3대구치 다음으로 호발하는 매복치아로 정확한 원인은 알려져 있지 않으나 매복된 상악 견치로 인한 다양한 합병증이 나타날 수 있다. 이소맹출하는 상악 견치는 초기의 진단을 통하여 유견치의 조기 발거와 같은 차단 교정을 시행하는 경우 가장 좋은 예후를 보일 수 있으나 초기치료를 시행하지 못한 경우에는 수술적 노출과 교정적 치료를 고려할 수 있다. 또한 이소맹출하는 치아가 말기에 발견되어서 인접치아의 심한 흡수를 보인다면, 견치가 손상된 인접 치아를 대체할 수 있다. 본 증례들은 이소맹출과 치근흡수의 조기 진단을 통하여 치료되지 못한 증례로 이소맹출하는 견치를 사용하여 상악 절치의 대체사용이 대안으로 선택되었고, 현재까지 성공적인 결과를 보인다. 복합레진으로 수복된 견치는 지속적인 관찰을 통하여서 수복물을 평가할 예정이며, 추후 교정치료와 임플란트의 식립이 계획되어있다. 본 증례는 초기 처치가 이루어지지 않은 경우에 견치를 절치로 대체 사용하여 치근 흡수된 치아의 불확실한 예후를 피하고, 시간과 비용을 절감하여 심미적 만족을 얻을 수 있는 방법에 대하여 보고하고자 한다.

• 치과방사선
• /
• 제24권2호
• /
• pp.291-304
• /
• 1994

The purpose of this study was to analyze the facial asymmetry of the patients with the craniomandibular disorder. In this study, 50 patients, who have joint clicking and pain, mouth opening limitation, and 40 dental students, Chosun University, who did not posses any restoration and orthodontic treatment, joint clicking and pain, mouth opening limitation, were selected as the control group. Both the control group and the patient group were takened skull P-A, submento-vertex radiogram by standized methods. After that, the deviation and facial asymmetry were measured and analyzed. The results of the this study were as follows: 1. In the Skull P-A radiogram, the width difference of control group and patient group measured that the △ Cg-Go-Cl: control group were 3.35㎜, patient group were 4.51㎜ (P<0.05), the △Cg-Zy-Go: control group were 1.83㎜, patient group were 3.27㎜(P<0.001). 2. In the Skull P-A radiogram, the height difference of control group and patient group measured that the △ Cg-Go-Cl: control group were 131.85㎜, patient group were 188.45㎜(P<0.05), the △Cg-Zy-Go: control group were 1.58㎜, patient group were 2.68㎜(P<0.00l). 3. In the Skull P-A radiogram, the area difference of control group and patient group measured that the △ Cg-Go-Cl: control group were 120.76㎟, patient group were 185.49㎟(P<0.05), the △Cg-Zy-Go: control group were 2.29㎟, patient group were 3.37㎟(p<0.05). 4. In the submento-vertex radiogram, the width difference of control group and patient group measured that the △Mr-Cl-Ia: control group were 1.50㎜, patient group were 2.35㎜(P<0.05), the △Mr-Cm-Ia: control group were 1.75㎜, patient group were 3.17㎜(P<0.05), the △Mr-Go-Ia: control group were 1.96㎜, patient group were 3.24㎜(P<0.001), the △Mr-Cp-Co: control group were 1.74㎜, patient group were 2.73㎜(P<0.05). 5. In the submento-vertex radiogram, the height difference of control group and patient group measured that the △Mr-Cp-Ia: control group were 1.68㎜, patient group were 2.46㎜P<0.05), the △Mr-CI-Ia: control group were 2.38㎜, patient group were 3.74㎜(P<0.05), the △Mr-Co-Ia: control group were 1.63㎜, patient group were 2.80㎜(P<0.05), the △Mr-Cm-Ia: control group were 1.45㎜, patient group were 3.12㎜(P<0.001). 6. In the submento-vertex radiogram, the area difference of control group and patient group measured that the △ Mr-Cp-Ia: control group were 73.17㎟, patient group were 110.16㎟(P<0.05), the △Mr-Cl-Ia: control group were 105.09㎟, patient group were 180.87㎟(P<0.001), the △Mr-Co-Ia: control group were 103.31㎟, patient group were 148.48㎟(P<0.05), the △Mr-Cm-Ia: control group were 97.01㎟, patient group were 167.83㎟(P<0.05), the △Mr-Go-Ia: control group were 104.24㎟, patient group were 205.90㎟(P<0.05).

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.466-477
• /
• 2005

Statement of problem : Problem of matching the appearance of porcelain restorations with the patient's natural dentition has always been a concern to dental clinicians. Recently, demands for esthetics, even in restorations requiring strength, has brought a revolution to dentistry and increased use of zirconia. Among the various factors, shade and translucency or the core can significantly affect the overall esthetics of the restoration and should be considered when selecting an all-ceramic system. Purpose : The purpose of this study was to spectrophotometrically evaluate the influence of different zirconia systems and core thickness on the final shade of all-ceramic restorations using the CIEL$^*a^*b^*$ system. Material and Methods: Core specimens (n : 20 per group) of In-Ceram Alumina, In-Ceram Zirconia, Digident CAD/CAM Zirconia, Cercon Zirconia were fabricated 20mm in diameter. 10 specimens of each group were fabricated at core thickness of 0.5mm and 0.7mm. These core specimens were veneered with shade Al & A3 porcelain of the recommended manufacturer. CIEL$^*a^*b^*$ coordinates were recorded for each specimen with a spectrophotometer (Model CM-2600d, Minolta, Japan). Color differences were calculated using the equation ${\Delta}E^*=[({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2]^{\frac{1}{2}}$. Results : 1. Specimens of core thickness 0.5mm and 0.7mm did not exhibit clinically perceived color difference. 2. Regarding shade reproducibility, In-Ceram Alumina and In-Ceram Zirconia showed significant difference within each group. 3. Cercon Zirconia group showed the highest $L^*$ value and Digident Zirconia group showed lowest $a^*$ & $b^*$ value. 4. Generally the shade difference between materials was higher in the A3 shade group than in the Al shade group. Conclusion: Within the limitations of this study, there was no color difference after increase in core thickness and every all-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.357-367
• /
• 1993

The purpose of this study was to evaluate the fracture strength of class II restored premolars with amalgam, posterior composite, amalgam - Ketac silver, resin - Ketac silver restorations at marginal ridge. Fifty extacted maxillary and mandibular premolar teeth that were caries free, fracture free, and restoration free were selected and randomly divided into five groups : Group 1 : 10 intact teeth, Group 2 : 10 teeth with class II cavities and restored with, amalgam, Group 3: 10 teeth with class II cavities and restored with posterior resin, Group 4 : 10 teeth with class II cavities and restored with amalgam - ketac silver, Group 5 : 10 teeth with class II cavities and restored with resin - Ketac silver. All teeth were mounted in base of dental stone within metal rings of 2cm diameter, exposing only the crown portion. Class II mesio - occlusal or disto - occlusal cavities were prepared into specimens of Group 2 through 5 by using a No. 710 fissure bur. The occlusal portion was prepared to a faciolingual width of 1.5mm and a pulpal depth of 1.5mm. The proximal protion was prepared to a faciolingual width of 4mm, a occlusogingival height of 4mm, and a gingival floor of 1.5mm. The teeth in Group 2 and 3 were resotored with silver amalgam apd posterior resin respectively. In Group 4 and 5, proximal portions were first filled with Ketac silver 1.5mm gingivally and remaining cavities were restored with amalgam and posterior resin respectively. All specimens were stored in 100 % relative humidity at $37^{\circ}C$ for 48 hours before testing. All teeth were subjected to a compressive load in a Universal Instron Testing Machine at marginal ridges. The loads required to fracture the restorations were recorded in killograms and the data obtained were subjected to statisticall analysis. The results were all follows : 1. The fracture strength of Group 1 which were unprepared were $100{\pm}10.1\;kg$ and the higher values than Group 2, 3, 4, 5 which were prepared and resotred. 2. In restored groups, Group 2 had the higher fracture strength($81.8{\pm}12.4\;kg$) than other groups and Group 4 had the lowest fracture strength($66.8{\pm}9.2kg$). 3. There were significant differences between fracture strength of between Group 1 and Group 3, 4, 5(P<0.05), but not significant difference between fracture strength of Group 2, 3, 4, 5(P>0.05).

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.671-683
• /
• 2005

Statement of problem: The most commonly reported problem associated with dental implant restoration is the loosening of the screws. Purpose: This study compared the efficacy of an implant system incorporating an anti-rotational locking sleeve(Anti-Rotating Inner Post Screw System(ARIPS-system)) with other, traditional implant systems as a means of minimizing vibration loosening. Materials and methods: Three implant systems were examined; the conventional external hex type, the ARIPS-system, and the internal taper type implant system 30 specimens(10 samples per group)were fabricated and each abutment screw was secured to the implant future with 32Ncm of torque force and loosening torque was measured using a Torque Gauge. The procedure was repeated 3 times, recording initial loosening torque each time. The re-tightened abutment screw was subjected to a cyclic load having a maximum forte of 200N and minimum of 20N at 2Hz over a period of 12,600 cycles. after which the loosening torque was measured. Measured values were calaulated for statistical analysis. Analysis of measured value was performed by 3 methods: (i) as a percentage average of the initial 3 loosening-torque values(initial loosening value) to the tightening torque of 32Ncm, (ii) as a percentage of the loosening torque value after a load of 200N(experimental value) to the initial loosening value, and (iii) as a percentage of the experimental value to the 32Ncm of tightening torque. The analyses shows the amount of initial loosening at the screw, loosening by repetitive load and the the final loosening value. Results: The results of this study were as follows (1) Percentage of initial loosening value to tightening-torque was increased in order of external hex, ARIPS-system and internal taper and all values between each groups showed statistical significance (p<0.05). (2) Percentage of experimental value to initial loosening value was increased in order of external hex, ARIPS-system and internal taper. Value of internal taper showed significant difference with those of external hex and ARIPS-system (p<0.05). (3) Percentage of experimental value to tightening torque was increased in order of external hex, ARIPS-system and internal taper and all values between each groups showed statistical significance (p<0.05). Conclusion: The results of the analysis of the final loosening level value, which are closely correlated to clinical use, show that the ARIPS-system can be a useful means of minimizing abutment screw loosening when compared to the external hex type system. Although further clinical studies need to be made, the ARIPS-system should be considered to maximize the long-term success of the implant prosthesis.

• 대한소아치과학회지
• /
• 제26권4호
• /
• pp.636-643
• /
• 1999

유전적인 외배엽 이형성증에 의해 무치증 혹은 부분적 무치증을 가진 환아들은 치조골 발육의 부족으로 나타난 감소된 수직고경으로 인해 어린 나이에서 노인과 같은 안모를 가지게 된다. 이에 어린이들은 또래의 어린이들과 잘 어울릴 수 없게 되고 소외감과 정서적 위축감을 느끼게 된다. 수직고경을 고려한 보철적 치료를 통해 적절한 기능과 심미적인 개선을 이룰 수 있도록 도와주는 것이 치과의사의 중요한 역할이라 하겠다. 이에 저자는 경희대학교 치과대학 부속치과병원 소아치과에 내원한 부분적 무치증을 동반한 외배엽 이형성증을 가진 환아에서 치과치료를 통한 심미적, 기능적 결함을 개전하면서 다음과 같은 결론을 얻었기에 보고하는 바이다. 1. 맹출 영구치 위에 클래스프를 위치시켜 의치유지력에 도움을 주었으며 상하악 피개의치의 장착으로 교합고경을 회복하여 저작, 발음, 심미적인 개선이 이루어졌다. 2. 피개의치의 이용으로 교합평면의 설정과 의치의 유지와 안정을 도모하였고, 맹출한 치아를 보존하고 남아있는 치조골의 폭과 높이를 유지할 수 있었다. 3. 치료를 통해 환아는 외모에 자신감을 가지고 치과환경에 익숙해져 긍정적인 태도를 가지게 되었다. 4. 주기적인 내원을 통한 영구치 상태와 성장, 발육동안의 의치의 관찰로 의치의 이장, 재제작이 요구된다.