• 대한치과의사협회지
• /
• 제53권5호
• /
• pp.368-376
• /
• 2015

Purpose : The objective of this research was to develop a more simplified drilling procedure with an enhanced implant drill. Materials and Methods : The drill enhanced design factors enabled implantation of Dia. 5.0mm fixture with only 2 times drilling which is more simplified drilling procedure. The enhanced drill was designed with 2 flutes, 2-phase or 3-phase formed drill tip and 25 degrees of helix angle. The proposed drilling procedure (2 times) was compared with a general drilling process (4 times) in terms of temperature changes, cutting time and ISQ value. Results : The simplified drilling procedure indicated less heat than a conventional drilling procedure (p<0.05). The enhanced drill showed significantly shorter drilling time than a conventional drill (p<0.05). On the other hand, higher insertion torque and ISQ value were observed on the the suggested drilling procedure than the conventional drilling procedure (p<0.05). Conclusion : A simplified drilling procedure with the newly designed drill could provide higher effectiveness and safety of dental implant operations under properly controlled external conditions, such as irrigation and RPM of drilling.

• 대한후두음성언어의학회지
• /
• 제14권1호
• /
• pp.5-9
• /
• 2003

Introduction : Laryngomicrosurgery(LMS) is frequent procedure applying to benign and early malignant larygeal disease such as vocal cord polyp, nodule and early glottic cancer. LMS has been known as safe procedure and short time consuming treatment. So few reports about complications in LMS was done. In this study, complications and problems from LMS were investigated and reported. Method : From 2000, January to 2001, December, 180 patients who were treated with LMS in Asan medical center were studied by retrograde chart review. Results : In these patients, total 9 patients(5%) were suffered from complication. 4 patients (2%) had teeth injury and 4(2%) were suffered from foreign body sensation in tongue and 1(1%) had hypoglossal nerve injury. Main mechanism of complications is thought by pressure injury by laryngoscope blade. No definite correlation between procedure and complication was observed. Conclusion : There are few neural complications with LMS such as lingual and hypoglossal nerve injury. Before operation of LMS, warning and informing of complications by mechanical stress must be done. Gentle procedure and short operation time are necessary to avoid these problems. And patients who have risk factors of oral complications such as dental disease or dental prosthesis must have dental evaluation and treatment before LMS procedure.

• 대한치과의사협회지
• /
• 제55권1호
• /
• pp.30-41
• /
• 2017

Inadequate keratinized mucosa around dental implants can lead to more plaque accumulation, tissue inflammation, marginal recession and attachment loss. We evaluated the effects of free gingival and extracellular matrix membrane grafts performed to increase the insufficient width of keratinized tissue around dental implants in the posterior mandible. A 47-year-old female patient presented with discomfort due to swelling of the lower right second premolar area. Due to severe destruction of alveolar bone, the tooth was extracted. After 3 months, a guided bone regeneration (GBR) procedure was performed and then a dental implant was placed 6 months later. During the second-stage implant surgery, free gingival grafting was performed to increase the width of the keratinized tissue. After 12 months, a clinical evaluation was performed. A 64-year-old female patient had a missing tooth area of bilateral lower molar region with narrow zone of keratinized gingiva and horizontal alveolar bone loss. Simultaneous implant placement and GBR were performed. Five months after the first-stage implant surgery, a gingival augmentation procedure was performed with an extracellular matrix membrane graft to improve the width of the keratinized tissue in the second-stage implant surgery. After 12 months, a clinical evaluation was performed. In these two clinical cases, 12 months of follow-up, revealed that the increased width of the keratinized tissue and the deepened oral vestibule was well maintained. A patient showed a good oral hygiene status. In conclusion, increased width of keratinized tissue around dental implants could improve oral hygiene and could have positive effects on the long-term stability and survival rate of dental implants. When planning a keratinized tissue augmentation procedure, clinicians should consider patient-reported outcomes.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제19권5호
• /
• pp.261-270
• /
• 2019

Background: People with the Ehlers-Danlos Syndromes (EDS), a group of heritable disorders of connective tissue, often report experiencing dental procedure pain despite local anesthetic (LA) use. Clinicians have been uncertain how to interpret this apparent LA resistance, as comparison of EDS and non-EDS patient experience is limited to anecdotal evidence and small case series. The primary goal of this hypothesis-generating study was to investigate the recalled adequacy of pain prevention with LA administered during dental procedures in a large cohort of people with and without EDS. A secondary exploratory aim asked people with EDS to recall comparative LA experiences. Methods: We administered an online survey through various social media platforms to people with EDS and their friends without EDS, asking about past dental procedures, LA exposures, and the adequacy of procedure pain prevention. Among EDS respondents who both received LA and recalled the specific LA used, we compared agent-specific pain prevention for lidocaine, procaine, bupivacaine, mepivacaine, and articaine. Results: Among the 980 EDS respondents who had undergone a dental procedure LA, 88% (n = 860) recalled inadequate pain prevention. Among 249 non EDS respondents only 33% (n = 83) recalled inadequate pain prevention (P < 0.001 compared to EDS respondents). The agent with the highest EDS-respondent reported success rate was articaine (30%), followed by bupivacaine (25%), and mepivacaine (22%). Conclusions: EDS survey respondents reported nearly three times the rate of LA non-response compared to non-EDS respondents, suggesting that LAs were less effective in preventing their pain associated with routine office dental procedures.

• 한국치위생학회지
• /
• 제18권4호
• /
• pp.515-524
• /
• 2018

Objectives: The purpose of this study is to investigate whether the ethical climate affects the job satisfaction of the clinical dental hygienists. Methods: A self-reported questionnaire was filled out by 207 dental hygienists. The data were analyzed by t-test or one-way ANOVA, multiple regression analysis, and Pearson's correlation analysis using IBM SPSS Statistics 19.0 program. Results: The factors affecting the job satisfaction of the general and ethical climate were the work experiences, the completion of vocational ethics education, the self interest type, the friendship type, the rule and the procedure type. When working experience and vocational ethics education are completed, self interest type and friend type have improved job satisfaction as the score increases, while job satisfaction is lowered as the rule and procedure type are increased. Conclusions: Since healthy ethical climate correlates with job satisfaction, it is necessary to establish an ethical climate in order to improve the job satisfaction of clinical dental hygienists. Efficient and stable management of ethical climate within dental clinics can be achieved when mutual interests are emphasized and respected rather than obedience is empathized to hospital regulations, procedures and policies.

• 대한치과의사협회지
• /
• 제41권11호통권414호
• /
• pp.761-767
• /
• 2003

• 대한치과의사협회지
• /
• 제22권6호통권181호
• /
• pp.464-464
• /
• 1984

• 대한치과의사협회지
• /
• 제31권5호통권288호
• /
• pp.366-370
• /
• 1993

• 대한치과의사협회지
• /
• 제22권2호통권177호
• /
• pp.98-98
• /
• 1984

• 한국치위생학회지
• /
• 제14권5호
• /
• pp.617-622
• /
• 2014

With the explosive increase of esthetic demands by patients, many dental materials for the esthetic restoration have been introduced. Recently, zirconia based restorations are using for the cases of single crown, bridges, implant prostheses etc. Zirconia have superior mechanical properties and biocompatibility. Owing to the properties of high strength, zirconia has to be manufactured by CAD/CAM system. Dental CAD/CAM system is a futuristic treatment and technical system which makes it possible to produce the precision and uniform prosthesis and also standardize the treatments. This article introduces the characteristics of zirconia, fabrication procedure using CAD/CAM system and procedure for the cementation of zirconia based restoration.