• Journal of Oral Medicine and Pain
• /
• 제17권1호
• /
• pp.19-29
• /
• 1992

Fear at the dental treatment is a problem not only for patient but for dentist as well, because the anxious patient often require more item, even for simple procedures. The anxiety level in response to dental procedures was evaluated through a simple questionnaire, Corahs, DAS. 783 female and 790 male outpatients were studied at the Dept. of Oral Diagnosis, PNUH from 1988 to 1989. The obtained results were as follows : 1. The anxiety level in female was significantly higher than that in male, and patients in 10s and 30s showed more anxious than those in other groups. 2. Housewives and pupils revealed higher level of anxiety. 3. The anxiety level in 524 (ICD) was the highest in all diseases, inspite of no difference among various diseases. 4. There was significantly higher level of anxiety in the patient of Orthodontics and Pedodontics than those of other departments. 5. There was no difference in anxiety level between acute and chronic group. 6. Dental phobes were more in female than in male.

• 대한치과마취과학회지
• /
• 제6권2호
• /
• pp.98-102
• /
• 2006

The purpose of this study was to evaluate the difference on pain intensity and discomfort between pressure-controlled injection system and conventional syringe injection technique from the patients undergoing oral and maxillofacial surgery. In a prospective, randomized, case-controlled study, 60 patients were divided into two groups (n=30 in each). In experimental group, pressure-controlled injection system was applied. In control group, conventional syringe injection system was applied. Pain rating score (PRS) and visual analogue scale (VAS) were assessed. The average of VAS in experimental group ($16.67{\pm}15.07$) was smaller than that of control group ($25.63{\pm}22.21$), though there were no significant differences (P=0.072). In PRS, fifteen patients (50.0%) of experimental group answered that they experienced mild pain. However sixteen patients (53.3%) of control group answered that they experienced intermediate pain. From the results, pressure-controlled injection system may be an effective method to reduce pain during the dental local anesthetic procedure.

• 대한치과마취과학회지
• /
• 제13권3호
• /
• pp.103-110
• /
• 2013

Background: Recently the use of sedation by pediatric dentists in Korea is increased. This study describes training programs about sedation practices in Korean pediatric dentistry residency program. Methods: A questionnaire was filled in by participants of Korean Academy of Pediatric Dentistry on 17th-18th August, 2008. Also the data about sedation practices of the training institution is collected by phone call. Results: Seventy two percent of respondents used sedation. Most of them used sedation with agents under 25% of their patients. Distribution of ages in patients sedated with agents was 3 years, 4-5 years, under 2 years, 6-10 years, and more than 10 years. Determinative factors of using sedation were behavior management, number of visiting, amount of treatment and general condition, and oral route was the most favorable route. Sixty six percent of them have failed on sedation, and thity percent of them have rarely failed on sedation. Only fifty percent of dentists using sedation completed the cardiopulmonary resuscitation course. Conclusions: For safety, dentists using sedation need to be educated about emergency equipment and management. Especially medication dose, use frequency and the detail related to treatment procedure should be discussed carefully. Also putting a patient under general anesthesia and taking emergency measures should be discussed with Korean Dental Society of Anesthesiology.

• 대한심미치과학회지
• /
• 제26권1호
• /
• pp.24-38
• /
• 2017

치과 임상에서 보철 과정은 1) 치아 삭제 2) 임시 수복물 제작 3) 포스트와 코어 4) 인상채득 5) 최종 보철물 합착의 순서로 진행된다. 보철 과정의 마지막이 정확한 적합과 교합 관계를 갖는 최종 보철물을 환자의 지대치의 적합시키는 과정이다. 그런데, 이 최종 보철물은 진료실에서 만들어지는 것이 아니라, 치과 기공실에서 만들어져서 약간의 시간차를 두고 진료실로 오게 된다. 진료실에서 환자의 구강 내 정보를 기공실로 전달하는 유일한 매체는 인상체이다. 그런데 이 과정에서 수 많은 오차가 발생된다. 치과 의사와 치과 기공사는 이 오차를 줄이기 위해 원인을 파악하고 정확한 보철물 제작을 위해 노력해야 한다.

• Archives of Plastic Surgery
• /
• 제50권2호
• /
• pp.166-170
• /
• 2023

Diaphragmatic reconstruction is required for extensive diaphragmatic defects associated with tumor resection. Methods using artificial mesh and autologous tissues, such as pedicled flaps, have been reported predominantly for diaphragmatic reconstruction. We present the case of a 61-year-old woman who presented with a 14×13×12 cm tumor in the abdominal cavity of the upper left abdomen on computed tomography. The diaphragm defect measuring 12×7 cm that occurred during excision of the malignant tumor was reconstructed using the rectus abdominis muscle and fascial flap. The flap has vertical and horizontal vascular axes; therefore, blood flow is stable. It also has the advantage of increasing the range of motion and reducing twisting of the vascular pedicles. Fascial flap does not require processing such as thinning and can be used during suture fixation. This procedure, which has rarely been reported so far, has many advantages and may be a useful option for diaphragm reconstruction.

• Journal of Periodontal and Implant Science
• /
• 제53권5호
• /
• pp.336-346
• /
• 2023

Purpose: The Korea Oral Biobank Network (KOBN) was established in 2021 as a branch of the Korea Biobank Network under the Korea Centers for Disease Control and Prevention to provide infrastructure for the collection, management, storage, and utilization of human bioresources from the oral cavity and associated clinical data for basic research and clinical studies. Methods: To address the need for the unification of the biobanking process, the KOBN organized the concept review for all the processes. Results: The KOBN established standard operating procedures for the collection, processing, and storage of oral samples. Conclusions: The importance of collecting high-quality bioresources to generate accurate and reproducible research results has always been emphasized. A standardized procedure is a basic prerequisite for implementing comprehensive quality management of biological resources and accurate data production.

• Journal of Periodontal and Implant Science
• /
• 제54권1호
• /
• pp.53-62
• /
• 2024

Purpose: This study aimed to evaluate the long-term cumulative survival rate (CSR) of dental implants with micro-threads in the neck over a 10-year follow-up period and to examine the factors influencing the survival rate of dental implants. Methods: This retrospective study was based on radiographic and dental records. In total, 151 patients received 490 Oneplant^® dental implants with an implant neck micro-thread design during 2006-2010 in the Department of Periodontology of Seoul National University Dental Hospital. Implant survival was evaluated using Kaplan-Meier analysis. Cox proportional hazard regression analysis was used to identify the factors influencing implant failure. Results: Ten out of 490 implants (2.04%) failed due to fixture fracture. The CSR of the implants was 97.9%, and no significant difference was observed in the CSR between external-and internal-implant types (98.2% and 97.6%, respectively, P=0.670). In Cox regression analysis, 2-stage surgery significantly increased the risk of implant failure (hazard ratio: 4.769, P=0.039). There were no significant differences in influencing factors, including sex, age, implant diameter, length, fixture type, location, surgical procedure, bone grafting, and restoration type. Conclusions: Within the limitations of this retrospective study, the micro-thread design of the implant neck was found to be favorable for implant survival, with stable clinical outcomes.

• Journal of Korean Dental Science
• /
• 제4권1호
• /
• pp.1-5
• /
• 2011

Purpose: Exact knowledge of the location and dimension of the pulp chamber help to maintain the pulp healthy during operative procedure and also reduces the risk of perforation of pulp chamber during root canal treatment. This in-vivo study was carried out to measure critical morphology of pulp chamber of mandibular molar using intra-oral periapical radiograph. Materials and Methods: Mandibular molar teeth of 56 patients were evaluated. The mandibular molar teeth whose pulp chamber was not violated by caries, restoration, fracture crown and those having closed apex were included in the study. The intraoral periapical radiographs were taken with paralleling angle technique using radio-opaque grid with 1 mm space. This grid was placed directly on the film. Results: In 94% of the mandibular first molars specimens the pulp chamber ceiling was at the level of the cemento-enamel junction. The measurements showing the lowest percentage variance were buccal cusp to furcation (approximately 11%) and buccal cusp to pulp chamber ceiling (approximately 15%). The distance from the cusp tip to pulp chamber ceiling height was approximately 6.0 mm, the distance from the pulpal floor to the furcation was approximately 3.0 mm, and the average height of a pulp chamber was 1.5 to 2.0 mm. Conclusion: The exact knowledge of distances of pulp chamber from various anatomical landmarks helps in proper assessment of root canals and ultimately avoids the failure of root canal treatment.

• 대한치과교정학회지
• /
• 제48권6호
• /
• pp.357-366
• /
• 2018

Objective: The purpose of this study was to analyze the transverse dental compensation in reference to the maxillary and mandibular basal bones using cone-beam computed tomography (CBCT) and evaluate the correlations between transverse dental compensation and skeletal asymmetry variables in patients with skeletal Class III malocclusion and facial asymmetry. Methods: Thirty patients with skeletal Class I (control group; 15 men, 15 women) and 30 patients with skeletal Class III with menton deviation (asymmetry group; 16 men, 14 women) were included. Skeletal and dental measurements were acquired from reconstructed CBCT images using OnDemand3D 1.0 software. All measurements were compared between groups and between the deviated and nondeviated sides of the asymmetry group. Correlation coefficients for the association between skeletal and dental measurements were calculated. Results: Differences in the ramus inclination (p < 0.001), maxillary canine and first molar inclinations (p < 0.001), and distances from the canine and first molar cusp tips to the midmaxillary or midmandibular planes (p < 0.01) between the right and left sides were significantly greater in the asymmetry group than in the control group. In the asymmetry group, the ramus inclination difference (p < 0.05) and mandibular canting (p < 0.05) were correlated with the amount of menton deviation. In addition, dental measurements were positively correlated with the amount of menton deviation (p < 0.05). Conclusions: Transverse dental compensation was correlated with the maxillary and mandibular asymmetry patterns. These results would be helpful in understanding the pattern of transverse dental compensation and planning surgical procedure for patients with skeletal Class III malocclusion and facial asymmetry.

• Journal of Korean Dental Science
• /
• 제3권2호
• /
• pp.12-19
• /
• 2010

Despite the latest advancement made in its techniques and devices/apparatuses and the resulting rising expectation in the field of dental surgery, apicoectomy performed in the molar teeth remains a technical challenge and lacks evidence substantiated by long-term follow-up studies. This study sought to investigate the treatment outcomes and post-operative success rate in the root-end resected molar teeth accompanied by a high level of surgical risks due to their close proximity to the mandibular canal and maxillary sinus. A total of 68 patients who received treatment at Livingwell Dental Hospital between 2004 and 2010 and underwent apical surgery in the maxillary or mandibular molar area were enrolled in this study. A total of 160 roots collected from 75 molar teeth were subjected to surgical endodontic treatment and subsequently evaluated clinically as well as radiographically. Based on the results of the study, the clinical success rate was found to be 78.8% in cases involving radiological healing. Likewise, 90.7% of the roots recorded a robust clinical survival rate, but with incomplete healing as shown by radiography. The results indicate that the apical procedure involving molar teeth is a prognosis-friendly method that promises positive outcomes and higher success rate based on long-term follow-up observations.