• 치위생과학회지
• /
• 제19권4호
• /
• pp.261-270
• /
• 2019

Background: In this study, four types of effervescent vitamins marketed in Korea were analyzed for their acidity and vitamin content. For this purpose, bovine teeth were immersed in vitamin, and surface microhardness and appearance were measured before and after immersion to evaluate tooth demineralization and erosion. Methods: Bovine permanent incisors with sound surface enamel were cut to 5×5 mm size, embedded in acrylic resin, and polished using a polishing machine with Sic-paper. The prepared samples were analyzed for pH, vitamin content, and surface hardness before and after immersion using a surface microhardness meter. Demineralization of surface dental enamel was observed using a scanning electron microscope. Results: The average pH of the four effervescent vitamins was less than 5.5; the pH of the positive control Oronamin C was the lowest at 2.76, while that of the negative control Samdasoo was the highest at 6.86. The vitamin content was highest in Berocca and lowest in the DM company Multivitamin. On surface microhardness analysis, surface hardness values of all enamel samples were found to be decreased significantly after 1 and 10 minutes of immersion (p<0.05). After 10 minutes of immersion, there was a significant difference in the decrease in hardness between the experimental groups (p<0.05). Scanning electron microscopy observation showed that dental enamel demineralization after 10 minutes of immersion was the most severe in Oronamin C except for Samdasoo, followed by DM company Multivitamin and VitaHEIM. Immersion in BeroNew and Berocca resulted in similar effects. Conclusion: There is a risk of tooth erosion due to decreased tooth surface microhardness when using the four types of effervescent vitamins and vitamin carbonated beverages with pH below 5.5. Therefore, high pH vitamin supplements are recommended to prevent tooth erosion.

• Journal of Periodontal and Implant Science
• /
• 제41권3호
• /
• pp.131-134
• /
• 2011

Purpose: To test the plaque-removal efficacy of a single-tufted toothbrush on the posterior molars compared with a flat-trimmed toothbrush. Methods: Forty-nine subjects were selected. Professional instruction and written brushing instructions were given. After thorough supra-gingival scaling and polishing, all subjects were asked to abstain from oral hygiene procedures for 24 hours prior to the first experiment. The subjects were randomized to a treatment sequence. The modified Quigley and Hein plaque index was recorded pre- and post-tooth brushing, at 6 surfaces of the posterior molars. After a wash-out period, all the remaining plaque was removed professionally. Twenty-four hours of brushing abstinence was again performed. The plaque index was recorded pre- and post-tooth brushing after the subjects were given the second toothbrush in the cross-over sequence. Results: The percentage reductions in plaque scores achieved with the single-tufted brushes were significantly higher than those of the flat-trimmed brush at the maxillary buccal interproximal, marginal and mandibular lingual interproximal site. The other locations showed no significant difference. Conclusions: The results of the present study implied that the single-tufted brush could be an effective tool for the removal of plaque at some, but not all, sites of the posterior molars.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.291-298
• /
• 2016

Purpose: This study was to evaluate the effect of coloring liquids on the shear bond strength between zirconia and veneering ceramic. Methods: Zirconia(15 mm in diameter, 2.5 mm in thickness; n=40) used in the experiment were divided into 5 groups depending on the coloring liquid. Each specimen were polished using a polishing machine(LaboPol-2, Struers, UK). A cylinder of veneering porcelain(6 mm in diameter, 3 mm in thickness) was fabricated and fired on zirconia surfaces. The shear bond strength was measured using a universal testing machine(Model 4302, Instron, USA). All data were analyzed statistically using a one-way ANOVA and Tukey's multiple comparisons test. After the shear bond test, fracture surfaces were examined by SEM. Results: Colored zirconia showed a higher shear bonding strength than that of uncolored zirconia except for colored zirconia immersed in Zirkonzahn coloring liquid. In particular, colored zirconia immersed in Kuwotech coloring liquid showed the highest shear bond strength. After the shear bond test, mixed failure patterns were mainly observed in the failure between zirconia and veneering ceramic. Conclusion: Coloring liquid enhanced the shear bond strength zirconia and veneering ceramic than uncolored zirconia.

• 치위생과학회지
• /
• 제12권5호
• /
• pp.477-485
• /
• 2012

본 연구는 레진 종류별 착색음식물별 착색시간별 착색정도와 연마, 과산화수소에 의한 미백 후의 색 변화를 관찰하여 착색과 미백이 레진의 CIELAB 색 표시계와 반사율에 미치는 영향을 알아보고자 한하였다. 시편은 동일 회사의 전구치부겸용 레진(A2), 유동형 레진(A2)을 가로, 세로 11 mm, 높이 3 mm의 직육면체모양으로 30초간 광중합한 시편 총 36개를 사용하였다. 착색원으로는 김치국물, 고추장, 카레, 블루베리즙, 홍차와 대조군으로 증류수를 사용하였으며 각 레진당 음식물별 3개의 시편을 사용하였고 측정은 윗면과 아랫면을 측정하여 각 6개면을 측정하였다. 착색기간은 총 8일, 35% 과산화 수소에 의한 미백은 1시간이 소요되었고, 음식물의 시간에 따른 착색 정도와, 미백 후의 반사율과 색값은 분광광도계를 이용하여 측정하였다. 그 결과, 1. 음식물별 시간에 따른 착색의 정도는 전구치부겸용 레진과 유동형 레진 모두에서 착색 1일차부터 L, a, b값과 반사율에서 모두 통계적으로 유의한 차이가 있었으며(p<0.05), 그 중 블루베리와 카레의 L, a, b값 변화가 크게 나타났다. 2. 음식물별 시간에 따른 착색후 반사율은 블루베리와 고추장이 대조군에 비해 유의하게 감소하였기 때문에(p<0.05) 같은 L, a, b값이더라도 블루베리, 고추장 착색 레진이 시각적으로 더 어둡게 보였다. 3. 전구치부겸용 레진은 과산화수소 미백과 연마를 한 경우가 단일 방법에 비해 ${\Delta}{E_{ab}}^2$의 값이 유의하게 변하였다(p=0.022). 그러나, 유동형 레진에서는 미백 방법에 따른 유의성은 없었다(p=0.385). 레진의 색 안정성을 위해서 착색이 심한 카레와 블루베리의 섭취빈도를 낮추도록 하거나 섭취 후 가급적 빠른 시간내에 입안을 헹구는 것이 레진수복물의 색 안정성을 유지시킬 것으로 사료되었다.

• 구강회복응용과학지
• /
• 제34권1호
• /
• pp.39-45
• /
• 2018

목적: 치석제거 및 치근면활택술(scaling and root planing, SRP)은 만성 치주염 환자에서 대표적인 비외과적 치주치료법이나 술자가 잔존치석을 시각적으로 확인하지 못하는 한계가 있다. 본 연구는 중등도 만성 치주염 환자에서 비외과적 치주치료 시 SRP에 부가적으로 erythritol 공기분말 연마기구를 사용하는 것의 임상적 효과를 평가해 보고자 한다. 연구 재료 및 방법: 중등도 만성 치주염을 가지는 21명의 환자에서 비외과적 치주치료를 위해 SRP로만 치료받은 21부위(대조군)와 SRP에 부가적으로 erythritol 공기분말 연마기구를 사용하여 치료한 21부위(실험군)에서 4 - 6 mm의 치주낭을 가지는 치아를 선택하여 평가하였다. 치료 전, 치료 완료 1개월, 3개월 후에 치주낭 깊이, 치은퇴축, 임상부착수준, 치태지수, 탐침시 출혈이 임상지표로 측정되었다. 결과: 실험군과 대조군 모두에서 치료 전에 비해 치료 1개월 후, 3개월 후 치주낭 깊이, 치태지수, 탐침시 출혈의 유의한 감소와 치은 퇴축의 증가 및 임상부착수준의 유의한 획득이 관찰되었다. 그러나 실험군과 대조군 간에 임상지표들의 변화에는 유의한 차이가 관찰되지 않았다. 치료 3개월 후 모든 임상지표들은 치료 전에 비해서는 개선되었으나 치료 1개월 후에 비해서는 악화되었다. 결론: 중등도 만성 치주염 환자의 비외과적 치주치료 시 erythritol 공기분말 연마기구는 부가적으로 적용될 수 있으나 SRP 단독과 비교하였을 때 임상적으로 더 효과적이라고 제안할 수는 없다. 또한 최소 3개월 간격의 주기적인 유지관리치료가 필요함을 알 수 있다.

• 대한소아치과학회지
• /
• 제27권1호
• /
• pp.54-61
• /
• 2000

아말감은 널리 사용되어 온 대표적 치과재료이지만 치질과의 접착성이 없어 와동의 형태에 의해 유지되는 단점을 가진다. 아말감 수복물은 산화물에 의한 변연봉쇄가 일어나기 전까지 초기에 큰 미세누출을 보이며 수복초기에 이를 적절하게 예방하지 않으면 타액이나 미생물이 와동내에 침투하게 되고 이로 인해 수복 후의 과민반응, 충전물의 용해 및 파괴, 변연 변색과 2차 우식이 유발되어, 결과적으로 수복물의 수명이 단축되며 치수 병변이 발생될 수도 있다. 최근 기존 아말감 수복의 장점을 그대로 유지하면서 치질삭제를 줄이고 변연을 봉쇄하며 소와열구에 예방적 처치를 함께 할 수 있는 수복법이 제안되었는데 이를 이른바 sealed amalgam이라 한다. 이 술식은 예방적 확대 없이 병소만을 제거한 뒤 수복물 변연과 인접 소와열구에 치면열구전색재를 도포함으로서 소와열구의 예방적 충전은 물론 수복물 변연과 치질사이의 틈을 봉쇄하여 미세누출을 감소시킬 수 있다고 하였다. 이에 저자는 아말감 수복후 수복물의 마무리 처리와 전색재 적용시점을 달리 하여 sealed amalgam 수복과 기존의 아말감 수복과의 미세누출의 차이를 비교하고자 30개의 상, 하악 소구치를 준비하여 V급 와동을 소구치의 협, 설측에 형성하고 통상적 아말감 수복을 시행한 후 다음의 각 군으로 나누어 처리하였다. 제 1 군 : 24시간 후 연마 (대조군) 제 2 군 : 연마하지 않음, 즉시 전색재 적용 제 3 군 : 연마하지 않음, 열순환(thermocycling) 500회 후 전색재 적용 위의 처리 후 각 군을 $5^{\circ}C$와 $55^{\circ}C$의 온도변화를 30초씩 번갈아 주며 총 500회의 열순환을 실시한 후 1% methylene blue 용액에 침윤시켜서 100% 습도가 유지된 $37^{\circ}C$ 항온기에 24시간 보관하였다. 치아를 레진에 매몰한 후 협설측으로 치아 장축에 평행하게 절단하여 stereomicroscope를 사용해 색소침투도를 관찰하여 다음과 같은 결론을 얻었다. 1. 평균 미세누출은 연마하지 않고 바로 치면열구전색재를 도포한 2군이 가장 낮았고, 연마만 시행한 1군이 가장 높았다. 2. 실험군간의 미세누출 비교에서 연마만 시행한 1군은 2군에 비해 미세누출이 켰으며 통계적으로 유의성 있는 차이를 보였다(p<0.05). 3군은 1군보다 평균미세누출이 작았으나 통계적으로 유의한 차이가 없었다(p>0.05). 2군은 3군보다 평균 미세누출이 작았으나 통계적으로 유의한 차이가 없었다(p>0.05).

• The Journal of Advanced Prosthodontics
• /
• 제7권1호
• /
• pp.56-61
• /
• 2015

PURPOSE. The purpose of this study was to evaluate the effects of the surface treatment and shape of the dental alloy on the composition of the prosthetic work and its metallic ion release in a corrosive medium after casting. MATERIALS AND METHODS. Orion Argos (Pd-Ag) and Orion Vesta (Pd-Cu) were used to cast two crowns and two disks. One of each was polished while the other was not. Two as-received alloys were also studied making a total of 5 specimens per alloy type. The specimens were submersed for 7 days in a lactic acid/sodium chloride solution (ISO standard 10271) and evaluated for surface structure characterization using SEM/EDAX. The solutions were quantitatively analysed for the presence of metal ions using ICP-MS and the results were statistically analysed with one-way ANOVA and a Tukey post-hoc test. RESULTS. Palladium is released from all specimens studied (range $0.06-7.08{\mu}g{\cdot}cm^{-2}{\cdot}week^{-1}$), with the Pd-Cu alloy releasing the highest amounts. For both types of alloys, ion release of both disk and crown pairs were statistically different from the as-received alloy except for the Pd-Ag polished crown (P>.05). For both alloy type, disk-shaped pairs and unpolished specimens released the highest amounts of Pd ions (range $0.34-7.08{\mu}g{\cdot}cm^{-2}{\cdot}week^{-1}$). Interestingly, in solutions submerged with cast alloys trace amounts of unexpected elements were measured. CONCLUSION. Shape and surface treatment influence ion release from dental alloys; polishing is a determinant factor. The release rate of cast and polished Pd alloys is between $0.06-0.69{\mu}g{\cdot}cm^{-2}{\cdot}week^{-1}$, which is close to or exceeding the EU Nickel Directive 94/27/EC compensated for the molecular mass of Pd ($0.4{\mu}g{\cdot}cm^{-2}{\cdot}week^{-1}$). The composition of the alloy does not represent the element release, therefore we recommend manufacturers to report element release after ISO standard corrosion tests beside the original composition.

• 치위생과학회지
• /
• 제17권4호
• /
• pp.358-367
• /
• 2017

본 연구에서는 소성한 치과도재 시편에 대해 glazing 처리 여부에 따른 수분 침투와 기계적 물성의 비교분석을 통해 glazing 처리의 중요한 의미를 도출하고자 하였다. 또한, 제한된 가속 시효처리 방법으로 구강 내 환경에서 치과용 수복물의 내구수명 예측이 가능하였으며 수분 내에서 가속 시효처리를 통하여 치과도재는 수분 노출로 인한 열화가 일어나고 굽힘강도 저하 현상을 보였다. 치과도재의 glazing 처리를 통해 연마 시 발생하는 시편 표면의 흠집 또는 소성시 발생하는 미세균열이나 기공의 노출을 억제함으로써 굽힘강도 향상 결과를 보였다. 또한 glazing 처리한 시편이 가속 시효처리의 시간이 증가할수록 강도 저하 현상을 보이긴 하지만 glazing 처리를 하지 않은 시편과 비교하여 볼 때, 열화되는 속도가 작은 것을 알 수 있었다. 따라서 구강 내에서 치과도재 보철의 내구성을 확보하기 위해서 영구장착 전 glazing 처리를 반드시 시행할 것을 권하며, 수분 침투 억제 방법에 대해서도 향후 체계적인 연구가 되어야 할 것으로 생각한다.

• 대한치과기공학회지
• /
• 제10권1호
• /
• pp.159-169
• /
• 1988

Fixed prosthetic appliance is the restorations of damaged teeth with cast metal or porcelain, and of replacing missing teeth with fixed, or cemented prosthesis. Successfully treating a patient by means of fixed prosthodontics requires the thoughtful combination of dentist and dental laboratory technician. In order to know the satisfaction of dentisits about fixed prosthetic appliances-porcelain, precious and non precious metal-, this study was conducted for 69 practicing dentisis in Pusan during Fed. to Mar. 1988 using a questionnaire method and was analyzed by the use of percentage, $X^2$-test The results are obtained as follow: 1. General characteristics of the respondents, The rate of age distribution of practcing dentists responded was as follow : 31$\sim$35 age group is 29.0%, 51$\sim$55age group 18.8%, 41$\sim$45 age group and 46$\sim$50 group each 11.6%, 36$\sim$40 age group and 56$\sim$60 age group 8.7%, over 60 age group 7.3%, below 30 age group 4.3% respectively. The tate of term of practice experience distribution of dentists responded was as follow : 6$\sim$10 year group 26.1%, 25$\sim$25year group 18.8%, 11$\sim$15 years group and 16~20 years group each 13.0%, below 5 years group and over 30 years group each 10.2%, 26$\sim$30 years group 8.7% in order. The rate of respondents’ degree was follow : bachelor group 81.2%, doctor group 13.0%, master group 5.8% in order. The rate of respondents’completed medical specialist course was as follow : non-complete group 75.4%, complete group 24.6%. The rate of having own laboratory in respondents’clinic was as follow : no having own laboratory group 58.0%, having own labiratory group 42.0% The rate of being lab. technician in respondent;s clinic was as follow: non-being lab. technician group 91.3%, being lab. technician group 8.7%. The rate of transactional commercial dental lab. numbers was as follow : I dental lab. group 40.6%, 2 dental lab. group 30.4%, 3 dental lab. group 20.3%, production at own lab. group 8.7% 2. Cognitions about the respondent's job, About cognition of patient numvers, there were neither many nor few group 62.3%, few group 17.4%, many group 15.9%, too many group 4.4% in order.(P<.01) As compared with the ratio of dentists to patient prothetic treatment, there were moderate level group 46.4%, high level group 33.6%, low level group 18.8% in order.(P<.01) By job satisfaction of respondents, the highest percentage group was satisfied group 44.9%, neither astisfied nor disstified group 33.3%, dissatisfied group 14.5%, much satisfied group 7.3%(P<.01). As compared with the level of prosthetics price, the were moderate level group 71.0%, low level group 23.2%, high level group 5.8%(P<.01) 3. Satisfaction and assessment of dissatisfied factor of the fixed prosthetic appliance, As compared with the satisfaction of al prosthetic appliance, there were neither satisfied nor dissatisfied group 59.4%, satisfied group 20.3% dissatisfied group 18.8%, much satisfied group 1.5% in order.(P<.01). About precious and non precious metal crown and bridge, there were neither satisfied nor dissatisfied group 60.9%, satisfied group 24.6%, dissatisfied group 11.6%, much satisfied group 2.9% in order.(P<.01) The reat of respondent;s satisfaction about porcelain crown and bridge was as follow : neither satisfied nor dissatisfied group 43.5%, dissatisfied group 33.3%, satisfied group 21.7%, much satisfied group 1.5%(P<.01). The rate of respondent's dissatisfied factor item of precious and non precious metal crown and bridge was as follow : inadequate margin fit item 39.1% respondent, inadequate occlusion item 24.6%, inadequate adaptation item 23.2%, poor anat omic form item 15.9%, inadequate contact item 31.9%, improper polishing item 4.4%, the rest item 11.6% respectively. The rate of respondent's dissatisfied factor item of porcelain crown and bridge was as follow : inadequate margin fit item 52.2%, inadequate occlusion item 2.9%, inadequate adaptation item 10.1%, poor anatomic form item 11.6%, improper polishing item 1.5%, shade mismatching item 71%, the rest item 7.2% respectively. The rate of cognition of respondents’ about cause of dissatisfied factor on fixed prosthetic appliance by item was as follow : deficiency of sincerity item 55.1%, deficiency of knowledge about work item 47.8%, deficiency of experience item 15.9%, poor quality of using material item 5.8%, the rest item 2.9% respectively.

• 대한심미치과학회지
• /
• 제11권2호
• /
• pp.33-36
• /
• 2002

As patients have concerned the esthetics of dental restorations, the porcelain fused to metal restorations have gain their popularity due to their strength and esthetic appearance for many years. However, metal collar in subgingival level of porcelain fused to metal restoration often causes black shadows. Inadequately positioned metal collar causes plaque depositions, gingival inflammations, black shadows, and discolorations of margin area. Those problems can be avoided by a clear finishing line, well-fabricated provisional restorations with precise margin and fine polishing, collarless porcelain fused to metal restoration, and all ceramic restoration. In this case report, collarless porcelain fused to metal restoration was used to treat cervical discoloration from old restorations.