• Restorative Dentistry and Endodontics
• /
• v.46 no.2
• /
• pp.23.1-23.11
• /
• 2021

Objectives: This study assessed the reliability of digital color measurements using images of resin composite specimens captured with a cellphone. Materials and Methods: The reference color of cylindrical specimens built-up with the use of resin composite (shades A1, A2, A3, and A4) was measured with a portable spectrophotometer (CIELab). Images of the specimens were obtained individually or pairwise (compared shades in the same photograph) under standardized parameters. The color of the specimens was measured in the images using RGB system and converted to CIELab system using image processing software. Whiteness index (WI_D) and color differences (ΔE₀₀) were calculated for each color measurement method. For the cellphone, the ΔE₀₀ was calculated between the pairs of shades in separate images and in the same image. Data were analyzed using 2-way repeated-measures analysis of variance (α = 0.05). Linear regression models were used to predict the reference ΔE₀₀ values of those calculated using color measured in the images. Results: Images captured with the cellphone resulted in different WI_D values from the spectrophotometer only for shades A3 and A4. No difference to the reference ΔE₀₀ was observed when individual images were used. In general, a similar ranking of ΔE₀₀ among resin composite shades was observed for all methods. Stronger correlation coefficients with the reference ΔE₀₀ were observed using individual than pairwise images. Conclusions: This study showed that the use of cellphone images to measure the color difference seems to be a feasible alternative providing outcomes similar to those obtained with the spectrophotometer.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.557-568
• /
• 2005

The aim of this study was to evaluate the resistance to degradation and to compare the wear resistance characteristics of four esthetic restorative materials in an alkaline solution(0.1N NaOH). The brands studied were MetafilCX(Sun medical, Japan) Solitaire 2(Heraeus Kulzer, USA), Composan LCM(Promedica, Germany), DenFil(Vericom, Korea). The results were as follows: 1. The mass loss of each brand was 0.74~7.94% and highest value in Metafil($7.94{\pm}0.39%$). 2. The sequence of the degree of degradation layer depth was in descending order by Metafil, Solitaire 2, DenFil, Composan LCM. There were significant differences between Metafil and the others(p<0.05). 3. The sequence of the Si loss was in descending order by Metafil, Solitaire 2, Composan LCM, DenFil. There were significant differences among the materials(p<0.05). 4. On SEM, destruction of bonding between matrix and filler and on CLSM, the depth of degradation layer of specimen surface was observed. 5. The sequence of maximum wear depth was in descending order by Metafil, Solitaire 2, Composan LCM and DenFil. There were significant differences among the materials(p<0.05). 6. The correlation coefficient between Si loss and degradation layer depth (r=0.491, p<0.05) and Vicker's hardness number and maximum wear depth (r=-0.942, p<0.05) were relatively high. These results indicate that hydrolytic degradation and wear may consider as a evaluation factors of composite resins.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.257-264
• /
• 2002

If dental ankylosis occurs in maxillary incisors of a growing child, the ankylosed tooth can not move vertically with the subsequent disturbance in vertical growth of the alveolar process. Because ankylosed tooth does not respond orthodontic force, extraction was recommended in the past. But the loss of tooth and accompaning alveolar bone loss incur compromised esthetic situation. And it is very hard to replace by prosthetics. So intentional surgical luxation and orthodontic movement was attempted, but usually this approach is followed by recurrence of the ankylosis. Nowadays the unitooth subapical osteotomy and rapid movement of block bone was reported. Two cases we presented, one is treated by intentional luxation and the other is by unitooth subapical osteotomy following application of light continuous force soon.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.4
• /
• pp.358-363
• /
• 2015

Previously, the usage of monolithic zirconia in anterior restoration was limited because of problems such as the monotony of tones and shades which would compromise the outcome of esthetic purpose. Zirconia was merely used as a coping with additional porcelain veneering whereas porcelain chipping cannot be evaded. Recently, with the improvement of monolithic zirconia, the various translucency and tones made it possible to use zirconia for anterior restoration. In this case, a male patient of 63 years old received a full mouth rehabilitation with monolithic zirconia. After a period of time usage, the outcome showed a favorable result functionally and esthetically.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.1
• /
• pp.255-260
• /
• 1989

Unfavorable healing of maxillary fractures may impose functional and esthetic burdens upon the trauma victim. Malunited maxillary fractures are generally a result of treatment delay, incomplete or inaccurate immobilization of the fracture fragments, or infection. Dysfunctions of mastication, distortions in speech, gross defects in facial contour, and related psychic changes are problems which may require secondary correction. When it is necessary to delay definitive treatment or when inadequate maxillary fracture reduction is recognized within the first week following injury, the maxilla can be mobilized by heavy handed dental manipulation under anesthesia or by elastic traction to an external fixation appliance attached to the maxilla by arch bars or an acrylic splint. But malunited maxillary fracture that have progressed to bony malunion require osteotomy procedure in order to establish normal anatomic relationships. This report parents two cases of malunited unilateral maxillary fracture surgically corrected by unilateral Le Fort I osteotomy.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.611-618
• /
• 2001

This is a case report of a 12.5-year-old girl who presented with moderate to severe anterior dental crowding and rotations. Treatment involved no extraction, but expansion of both the maxillary and the mandibular arches. Maxillary expansion was assisted by rapid palatal expansion despite the fact that this patient did not present with posterior crossbite. Crowding and rotations in both arches were corrected and good occlusal function and improved facial esthetic were achieved, with acceptable overbite and overjet. The application of rapid maxillary expansion in cases with no posterior crossbite, which has increased in recent years, calls for re-evaluation of the diagnostic basis and indications for the use of this technique.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.4 no.1
• /
• pp.17-20
• /
• 2008

In the brain of epilepsy patients, sudden and unusually intense bursts of electrical charges are occurred repeatedly. So, epilepsy patient experiences seizure. Seizure shows various frequency and precipitating factor and has a prodrome. Also, epilepsy patient present various behavior pattern during seizure. If the biting injury occurred during seizure, there would be pain, infection, defect of soft tissue and esthetic problem. The dental management of self-mutilation includes preserve methods of using appliances such as lip bumper or soft mouth guard and radical methods such as extraction of all teeth or orthognathic surgery. A case of epilepsy patient with self-mutilation of mento-labial sulcus is presented. She was treated successfully with soft mouth guard.

• The korean journal of orthodontics
• /
• v.4 no.1
• /
• pp.57-61
• /
• 1974

The patient, a girl of 19 years in good health, had a class I malocclusion. The maxillary left centra1 incisors and both lateral incisors had already erupted. But the space for the right central incisor was partially closed by the mesial drifting of the neighboring teeth. The caused a shift in the midline and a cross-bite relation on the incisors. X-ray examination revealed the presence of the right central incisor in the alveolar bone and odontoma just above the crown of the right central incisor. After enough space for the impacted incisor was created in the dental arch with a open-coil spring the rectangular incision was made. Removing the odontoma uncovered the flat surface of the labial aspect of the incisor. During the tooth had erupted of its own accord, any unnecessary force had been imposed on the tooth. When it was decided that the tooth should be brought out by the mechanical device, the gold cast onlay with hook was used and run a light elastic between this hook and the main arch wire. Finally the tooth was brought down to the arch level. The result was excellent. Fortunately the esthetic problem and any detrimental effects on the psychological make-up could be avoided.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.2
• /
• pp.119-126
• /
• 2002

The purpose of this study was to restorate a patient who has a few remaining teeth with #15,23,24 supported Konus telescope denture in Maxillar and #44,43,33,34 supported Dolder bar retained overdenture in Mandible. Konus telescope and bar retained overdenture was taken better results in retention, support, stability compair with regular Removable partial denture. In Removable partial denture, the change of remaining teeth and edentulous ridge is natural. But Konus telescope and bar retained overdenture is a little effected in this change, so it is possiblble in long-term use. In cosider of patient's medical history and the possibility of additional tooth loss, Konus telescope denture can be easily repaired. Compaired with Konus telescope and bar retained overdenture showed high stability and easy cleansing because of rigid support, cross - arch splinting, and simple design. In delivery, patient had a difficulty with removal of denture and plaque control, but showed better condition, good oral hygienic care. Patient satisfied with denture functionally and esthetically. This study showed Konus telescope and bar retained overdenture was effective for treatment of patient remaing a few teeth in function, esthetic and psycologic satisfaction.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.4
• /
• pp.317-323
• /
• 2003

When making crown and bridges on anterior regions, many practitioners consider the esthetics the most. For this reason functional aspect are not considered as much as the esthetics. If the occlusion on the anterior region are not formed correctly, movement of the temporomandibular joint can be disturbed and excessive stress can be occur that pathologic condition can be under lied. On this case presentation will show the importance of the anterior guidance and suggest the appropriate protocol of using customized anterior guide table. A 45years old male had to remake both of the upper central and lateral PFM because of the porcelain fracture. The new PFM crowns were made conventional methods without considering the anterior guidance. After the temporary setting, the patient complained of discomfort and short looking upper anteriors. To solve these problems we had to restore the palatal contour and length of the new crowns by making customized anterior guide table using temporary crowns that contains patient's old anterior guidance. This procedure which is copying the pt's comfortable anterior guidance to the final prosthesis made them to be esthetic and patients to feel comfortable.