• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.3
• /
• pp.129-142
• /
• 2018

Introduction: This systematic review evaluated the use of buffered versus non-buffered lidocaine to increase the efficacy of inferior alveolar nerve block (IANB). Materials and Methods: Randomized, double-blinded studies from PubMed, Web of Science, Cochrane Library, Embase, and ProQuest were identified. Two of the authors assessed the studies for risk of bias. Outcomes included onset time, injection pain on a visual analog scale (VAS), percentage of painless injections, and anesthetic success rate of IANB. Results: The search strategy yielded 19 references. Eleven could be included in meta-analyses. Risk of bias was unclear in ten and high in one study. Buffered lidocaine showed 48 seconds faster onset time (95% confidence interval [CI], -42.06 to -54.40; P < 0.001) and 5.0 units lower (on a scale 0-100) VAS injection pain (95% CI, -9.13 to -0.77; P=0.02) than non-buffered. No significant difference was found on percentage of people with painless injection (P = 0.059), nor success rate (P = 0.290). Conclusion: Buffered lidocaine significantly decreased onset time and injection pain (VAS) compared with non-buffered lidocaine in IANB. However due to statistical heterogeneity and low sample size, quality of the evidence was low to moderate, additional studies with larger numbers of participants and low risk of bias are needed to confirm these results.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.5
• /
• pp.441-449
• /
• 2021

Background: The efficacy of local anesthesia decreases in patients with symptomatic irreversible pulpitis. Therefore, it was proposed that the use of premedication with an anti-inflammatory drug might increase the success rate of pulpal anesthesia in mandibular posterior teeth with vital inflamed pulp. Methods: One hundred thirty-four patients who were actively experiencing pain willingly participated in this study. The Heft Parker (HP) visual analog scale (VAS) was used to record the initial pain intensity. Patients were randomly allocated to receive a placebo, 10 mg of ketorolac, and 650 mg of paracetamol. The standard inferior alveolar nerve block (IANB) was administered to all patients using 2% lidocaine with 1:200,000 adrenaline after one hour of medication. After 15 min, the patient was instructed to rate the discomfort during each step of the treatment procedure, such as access to remaining dentin, access to the pulp chamber, and during canal instrumentation on the HP VAS. IANB was considered successful if the patient reported no or mild pain during access preparation and instrumentation. Moderate or severe pain was classified as a failure of IANB and another method of anesthesia was used before continuing the treatment. Results: The rate of successful anesthesia in the placebo, paracetamol, and ketorolac groups was 29%, 33%, and 43%, respectively, and no statistically significant difference was found between the groups. Conclusion: Preoperative administration of paracetamol or ketorolac did not significantly affect the success rate of IANB in patients with irreversible pulpitis. No significant difference was observed between the paracetamol and ketorolac groups.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.2
• /
• pp.101-109
• /
• 2019

Background: The purpose of this study was to compare the pain perception and anesthetic efficacy of 2% lignocaine with 1:200,000 epinephrine, buffered lignocaine, and 4% articaine with 1:200,000 epinephrine for the inferior alveolar nerve block. Methods: This was a double-blind crossover study involving 48 children aged 5-10 years, who received three inferior alveolar nerve block injections in three appointments scheduled one week apart from the next. Pain on injection was assessed using the Wong-Baker Faces pain scale and the sound eye motor scale (SEM). Efficacy of anesthesia was assessed by subjective (tingling or numbness of the lip, tongue, and corner of mouth) and objective signs (pain on probing). Results: Pain perception on injection assessed with Wong-Baker scale was significantly different between buffered lignocaine and lignocaine (P < 0.001) and between buffered lignocaine and articaine (P = 0.041). The onset of anesthesia was lowest for buffered lignocaine, with a statistically significant difference between buffered lignocaine and lignocaine (P < 0.001). Moreover, the efficacy of local analgesia assessed using objective signs was significantly different between buffered lignocaine and lignocaine (P < 0.001) and between lignocaine and articaine. Conclusion: Buffered lignocaine was the least painful and the most efficacious anesthetic agent during the inferior alveolar nerve block injection in 5-10-year-old patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.1
• /
• pp.21-32
• /
• 2022

Objectives: Inferior alveolar nerve block (IANB) is commonly used for mandibular dentoalveolar surgery. The objective of this study was to evaluate and compare the effectiveness of coadministration of dexamethasone (4 mg/mL) or adrenaline (0.01 mg/mL) as an adjuvant with lignocaine 2% in IANB during third molar surgery (TMS). Patients and Methods: This double-blind, randomized controlled trial was conducted between March and August 2020. The investigators screened patients needing elective TMS under local anesthesia. Based on strict inclusion and exclusion criteria, patients were enrolled in this study. These patients were assigned randomly into two study groups: dexamethasone group (DXN) or adrenaline group (ADN). Outcome variables were postoperative edema, trismus, visual analogue scale (VAS), perioperative analgesia, onset time, and duration of IANB. Results: Eighty-three patients were enrolled in this study, of whom 23 (27.7%) were eliminated or excluded during follow-up. This study thus included data from 60 samples. Mean age was 32.28±11.74 years, including 28 females (46.7%) in the ADN (16 patients, 57.1%) and DXN (12 patients, 42.9%) groups. The duration of action for DXN (mean±standard deviation [SD], 4:02:07±0:34:01 hours; standard error [SE], 0:06:00 hours; log-rank P=0.001) and for ADN (mean±SD, 1:58:34±0:24:52 hours; SE, 0:04:42 hours; log-rank P=0.001) were found. Similarly, time at which 1st analgesic consume and total number of nonsteroidal antiinflammatory drugs need to rescue postoperative analgesia was found statistically significant between study groups (t (58)=-11.95; confidence interval, -2:25:41 to -1:43:53; P=0.001). Early-hours VAS was also significantly different between the study groups. Conclusion: A single injection of dexamethasone prolongs the duration of action of lignocaine 2% IANB. Additionally, it can be used in cases where adrenaline is contraindicated.

• Journal of Korean Dental Science
• /
• v.17 no.2
• /
• pp.64-74
• /
• 2024

This case report presents the long-term radiographic outcomes of a novel approach for simultaneous lateral augmentation and implant surgery. A 60-year-old male patient who required tooth extraction of the maxillary central and lateral incisors due to trauma visited the clinic. After tooth extraction, severe horizontal and vertical deficiencies occurred owing to atrophy of the alveolar ridge, and a simultaneous guided bone regeneration (GBR) procedure was planned along with the installation of two implants. In the present case, a modification of the conventional 'sandwich technique' was used by placing the mixture of autogenous bone chips and xenografts at the outermost layer to maximize the osteogenic potential at the coronal part of augmentation while applying solely xenografts at the inner layer. To enhance volumetric stability, an autogenous block of periosteum harvested from the maxillary tuberosity was incorporated between the two layers. Cone-beam computed tomography was performed at baseline and 3 years after the surgery to compare radiographic outcomes. Dehiscence after fixture installation was successfully observed at the re-entry of the surgery site. Three years after the surgery, average horizontal bone gains of 6.11 mm and 4.12 mm were observed in the maxillary central and lateral incisor areas, respectively. Healthy peri-implant mucosa and well maintained marginal bone levels were observed 8 years after the surgery, meeting the criteria for implant success. The findings of this case suggest that a substantial amount of horizontal bone gain can be obtained with a layered approach using autogenous bone materials and xenografts, highlighting the advantages of incorporating autogenous blocks into the simultaneous GBR procedure.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.5
• /
• pp.251-258
• /
• 2020

PURPOSE. The bond strengths between resin denture teeth with various compositions and denture base resins including conventional and CAD/CAM purposed materials were evaluated to find influence of each material. MATERIALS AND METHODS. Cylindrical rods (6.0 mm diameter × 8.0 mm length) prepared from pre-polymerized CAD/CAM denture base resin blocks (PMMA Block-pink; Huge Dental Material, Vipi Block-Pink; Vipi Industria) were bonded to the basal surface of resin teeth from three different companies (VITA MFT^®; VITA Zahnfabrik, Endura Posterio^®; SHOFU Dental, Duracross Physio^®; Nissin Dental Products Inc.) using resin cement (Super-Bond C&B; SUN MEDICAL). As a control group, rods from a conventional heat-polymerizing denture base resin (Vertex™ Rapid Simplified; Vertex-Dental B.V. Co.) were attached to the resin teeth using the conventional flasking and curing method. Furthermore, the effect of air abrasion was studied with the highly cross-linked resin teeth (VITA MFT^®) groups. The shear bond strengths were measured, and then the fractured surfaces were examined to analyze the mode of failure. RESULTS. The shear bond strengths of the conventional heat-polymerizing PMMA denture resin group and the CAD/CAM denture base resin groups were similar. Air abrasion to VITA MFT^® did not improve shear bond strengths. Interfacial failure was the dominant cause of failure for all specimens. CONCLUSION. Shear bond strengths of CAD/CAM denture base materials and resin denture teeth using resin cement are comparable to those of conventional methods.

• Restorative Dentistry and Endodontics
• /
• v.41 no.1
• /
• pp.37-43
• /
• 2016

Objectives: The purpose of this study was to compare the marginal and internal fit of nano-composite CAD-CAM restorations. Materials and Methods: A full veneer crown and an mesio-occluso-distal (MOD) inlay cavity, which were prepared on extracted human molars, were used as templates of epoxy resin replicas. The prepared teeth were scanned and CAD-CAM restorations were milled using Lava Ultimate (LU) and experimental nano-composite CAD/CAM blocks (EB) under the same milling parameters. To assess the marginal and internal fit, the restorations were cemented to replicas and were embedded in an acrylic mold for sectioning at 0.5 mm intervals. The measured gap data were pooled according to the block types and measuring points for statistical analysis. Results: Both the block type and measuring point significantly affected gap values, and their interaction was significant (p = 0.000). In crowns and inlays made from the two blocks, gap values were significantly larger in the occlusal area than in the axial area, while gap values in the marginal area were smallest (p < 0.001). Among the blocks, the restorations milled from EB had a significantly larger gap at all measuring points than those milled from LU (p = 0.000). Conclusions: The marginal and internal gaps of the two nano-composite CAD/CAM blocks differed according to the measuring points. Among the internal area of the two nano-composite CAD/CAM restorations, occlusal gap data were significantly larger than axial gap data. The EB crowns and inlays had significantly larger gaps than LU restorations.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.5
• /
• pp.461-470
• /
• 2001

A unhealthy 58-year-old male patient required extraction of left upper second molar due to advanced periodontitis. Lidocaine contained 1 : 100000 epinephrine for left posterior superior alveolar nerve block was administered in the mucobuccal fold above the second molar to be treated at the local private dental clinic. After four hours of posterior superior alveolar block anesthesia, patient feeled double vision and discomfort of eyeball movement. At next day, he complained difficulty of left eyeball movement, vertigo and diplopia. He was referred to our department via local clinic and department of ophthalomology of our hospital. He was treated by medication and eyeball exercise, and then follow up check. The double vision and medial rectus muscle palsy disappeared patially after 2 months of block anesthesia. We described herein an ocular complication of diplopia and inferior rectus muscle palsy after posterior superior alveolar nerve block for extraction of left upper second molar, and review the cause or origin of this case. The autonomic nervous system is presented as the logical basis for the untoward systems of ophthalmologic sign likely to diplopia and inferior rectus muscle palsy, rather then simple circulation of anesthetic solution in the vascular network.

• The Journal of the Korean dental association
• /
• v.57 no.12
• /
• pp.768-777
• /
• 2019

Alveolar bone resorption are unpredictable and always occur after tooth extraction. Such bone resorption causes insufficient alveolar ridge which make implant placement difficult. There are many techniques to increase the alveolar ridge. Representative procedures include ridge split, guided bone regeneration, bone graft using autogenous block bone, and alveolar distraction. In each procedure, there are indications and complications. Depending on the shape and the width of bone defects, we can choose procedures for horizontal bone augmentation and vertical bone augmentation.

• Journal of Korean Dental Science
• /
• v.3 no.2
• /
• pp.50-59
• /
• 2010

Implant placement is frequently complicated and challenging because of the poor quality and inadequate height of bone. Clinicians should consider various surgical procedures to overcome the problems. We report a case with various surgical procedures used such as inferior alveolar nerve repositioning, sinus bone graft, and autogenous block bone graft using the coronoid process and ramus to overcome severe vertical and horizontal alveolar bone atrophy.