• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.2
• /
• pp.129-137
• /
• 2021

Background: Inappropriate use of intravenous and inhaled anesthetics may be dangerous in infants undergoing facial cleft surgeries. This study primarily aimed to compare the effect of infraorbital nerve block on sevoflurane requirement in infants undergoing cheiloplasty. Intraoperative opioid consumption, hemodynamics, blood glucose levels, extubation time, and delirium were also compared. Methods: This prospective, randomized, double-blinded study was conducted in 34 infants undergoing cheiloplasty under general anesthesia. After induction, group A received bilateral infraorbital nerve block with 0.5 mL of 0.5% bupivacaine and group B 0.5 mL saline. An increase in heart rate or blood pressure > 20% was managed by increasing sevoflurane by 2-2.5%, followed by fentanyl 0.5 ㎍/kg bolus. The chi-square test and independent-sample t-test were used where applicable. Results: Demographics, duration of surgery, and intravenous fluids used were comparable between the groups. Compared to group A, patients in group B had significantly higher consumption of fentanyl (14.2 ± 4.4 ㎍ vs. 22.1 ± 6.2 ㎍) and sevoflurane (14.2 ± 4.8 mL vs. 26.8 ± 15.6 mL). Intraoperative hemodynamic parameters were significantly lower in group A, the number of times increases in hemodynamic parameters occurred, and fentanyl supplemental bolus was required remained significantly lower in group A than in group B. Intraoperative glycemic levels remained higher in group B, and the extubation time was significantly shorter in group A than in group B (4.40 ± 1.60 min vs. 9.2 ± 2.18 min). Group A had a lesser occurrence of postoperative delirium. Conclusion: Supplemental infraorbital block in infants undergoing cheiloplasty under general anesthesia resulted in significantly decreased anesthetic requirements and optimal hemodynamic and glycemic levels with faster extubation and lesser delirium.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.113-119
• /
• 2012

Purpose: Zirconia blocks for all ceramic dentures are divided into two groups. One is pre-heated block and the other is binder added block. In this study, the possibility of recycling the remained parts of binder added block after CAD/CAM machining with slip casting process was investigated. Methods: Owing to the binder added block contain large amount of organic matter, Binder burn-out was must be carried out before ball milling for preparing the casting slip. Binder burn-out was accomplished at $600^{\circ}C$ for 10 hours. Ball milling was performed with 5mm zirconia ball and 60mm polyethylene bottle. From 0% to 5% at 1% intervals of alumina was added to zirconia powder for preparing slip. Solid casting was achieved with plaster mold. Cast bodies were dried and sintered at $1,500^{\circ}C$ for 1 hour. Linear shrinkage, apparent porosity, water absorption, bulk density, and flexural strength were tested. Microstructures were observed by SEM, EDS and XRD analysis were executed. Results: Optimum slips for casting was prepared with 300g ball, 100g powder, and 180g distilled water. Cast body without alumina showed 26% of linear shrinkage, 6.07 of apparent density, and 470MPa of three point bend strength. On the other hand, as received zirconia block, which was sintered at the same conditions, showed 23% of linear shrinkage, 6.10 of apparent density, and 680MPa of three point bend strength. When 3% of alumina was added to zirconia, sintered body showed 23% of linear shrinkage, 6.10 of apparent density, and 780MPa of three point bend strength. SEM photomicrographs and EDS analysis showed alumina particles uniformly dispersed in zirconia matrix, and XRD analysis showed no phase transformation of tetragonal zirconia particles was occurred when alumina was added. Conclusion: According to the all of this experimental results, 3% of alumina added cast zirconia body showed excellent mechanical properties more than as received binder containing zirconia block.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.13 no.2
• /
• pp.39-44
• /
• 2013

Most of the dental treatments have been routinely performed under the local anesthesia and the effectiveness has also been proved safe. However, even not frequently dentists face some complications associated with the local anesthesia. In this report, the experience of the paresthesia after mental nerve block anesthesia for an implant placement of the mandibular premolar was presented to raise awareness of the complications related with local anesthetic procedure and to discuss about the causes, the proper treatments and the preventive approach of the paresthesia.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.165-173
• /
• 2016

Purpose: This study was conducted to examine the color stability of temporary prosthetic materials for dental CAD-CAM. Method: 2 kinds of existing acrylic resin temporary filling materials and 2 kinds of polymer prosthetic materials for dental CAD-CAM were used for testing, and five specimens respectively were absorbed in soy sauce, red pepper paste, and coffee. A Chroma Meter was used as analysis equipment. The color change of the specimens was observed to calculate ${\Delta}E$ value throughout 2 days, 3 days, 4 days, and 5 days and this was analyzed and the following result was obtained. Results: Snap's ${\Delta}E$ value was bigger than Vipi block(p<0.05). Red pepper paste had the largest impact on the color change of resin(${\Delta}E$), followed by soy sauce and coffee(p<0.000). With the passage of time, ${\Delta}E$ value was inversely(-) related and decreased somewhat(p<0.000).

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.21 no.1
• /
• pp.41-47
• /
• 2021

Background: This study was designed to compare the efficacy of DentalVibe against 2% lidocaine gel in reducing pain during the administration of local anesthetic injection in the adult population. Methods: This was a split-mouth open-label, randomized, controlled clinical study conducted in the Department of Oral and Maxillofacial Surgery of a dental institute. Fifty patients who were scheduled for bilateral dental extractions requiring an inferior alveolar nerve block were enrolled in the study. Site A (n = 50) was coated with 2% lidocaine gel followed by a local anesthetic injection, and DentalVibe with local anesthetic injection was used for Site B (n = 50). The primary outcome was pain, which was recorded immediately after the administration of anesthetic injection using the Visual Analogue Scale [VAS 0 - 10]. Results: The VAS pain scores ranged from 4 to 10 for site A and 0 to 6 for site B. Comparison between the two sites showed a statistically significant difference [Mann-Whitney U test value = 51.50, P < 0.001] favoring site B. Conclusion: This study showed that DentalVibe reduces pain during injection of local anesthesia compared to topical anesthetic gel.

• 대한치주과학회:학술대회논문집
• /
• 2007.11a
• /
• pp.111-111
• /
• 2007

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.41-47
• /
• 2008

This study was to evaluate the biaxial flexural strength of zirconia ceramics after glass-infiltration on zirconia core. The zirconia specimens were made with diameter-15mm, thickness-0.6mm using zirconia block which divided into 1) sintered group, 2) heat - treated group, 3) Glass - infiltrated group and experimented fracture strength by each 10 specimens in experimental group. The biaxial flexural test was performed at crosshead speed of 0.1${\beta}\;{\AE}$ min. The experiment result average fracture strength was shown 541.0${\beta}\acute{A}$ in sintered group and glass-infiltrated group as 662.2${\beta}\acute{A}$ river of 22.4% rise appear. Weibull coefficient sintered group is 3.462 and glass-infiltrated group improved believability about fracture strength from melting permeation processing of glass by 4.716.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.1
• /
• pp.54-54
• /
• 2023

• Journal of Periodontal and Implant Science
• /
• v.46 no.4
• /
• pp.220-233
• /
• 2016

Purpose: The aim of this study was to present new a model that allows the study of the bone healing process, with an emphasis on the biological behavior of different graft-to-host interfaces. A standardized "over-inlay" surgical technique combined with a differential histomorphometric analysis is presented in order to optimize the use of critical-size calvarial defects in pre-clinical testing. Methods: Critical-size defects were created into the parietal bone of 8 male Wistar rats. Deproteinized bovine bone (DBBM) blocks were inserted into the defects, so that part of the block was included within the calvarial thickness and part exceeded the calvarial height (an "over-inlay" graft). All animals were sacrificed at 1 or 3 months. Histomorphometric and immunohistochemical evaluation was carried out within distinct regions of interest (ROIs): the areas adjacent to the native bone (BA), the periosteal area (PA) and the central area (CA). Results: The animals healed without complications. Differential morphometry allowed the examination of the tissue composition within distinct regions: the BA presented consistent amounts of new bone formation (NB), which increased over time ($24.53%{\pm}1.26%$ at 1 month; $37.73%{\pm}0.39%$ at 3 months), thus suggesting that this area makes a substantial contribution toward NB. The PA was mainly composed of fibrous tissue ($71.16%{\pm}8.06%$ and $78.30%{\pm}2.67%$, respectively), while the CA showed high amounts of DBBM at both time points ($78.30%{\pm}2.67%$ and $74.68%{\pm}1.07%$, respectively), demonstrating a slow remodeling process. Blood vessels revealed a progressive migration from the interface with native bone toward the central area of the graft. Osterix-positive cells observed at 1 month within the PA suggested that the periosteum was a source of osteoprogenitor elements. Alkaline phosphatase data on matrix deposition confirmed this observation. Conclusions: The present model allowed for a standardized investigation of distinct graft-to-host interfaces both at vertically augmented and inlay-augmented sites, thus possibly limiting the number of animals required for pre-clinical investigations.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.6
• /
• pp.483-489
• /
• 2011

Introduction: This study examined the cumulative resorption of implants placed in a severely atrophic mandible and analyzed the radiologic bone resorption in the marginal bone, after an autogenous bone graft including both block and particulates that had been harvested from the ramus and iliac crest. Materials and Methods: A retrospective study was performed on patients who had bone grafts for augmentation followed by implant installation in the mandible area from 2003 to 2008. Twelve patients (6 men and 6 women) who received 34 implants in the augmented sites were evaluated. Cumulative radiologic resorption around the implants was measured immediately, 3 months, 6 months and 12 months after implant installation surgery. Results: The installed implant in grafted bone showed 0.84 mm marginal bone resorption after 3 months and 50% total cumulative resorption after 1 year. The mean marginal bone resorption around the implant installed in the grafted bone was 0.44 mm after 3 months, 0.52 mm after 1 year, after which it stabilized. The implant survival rate was 97% (failed implant was 1/34). Marginal bone resorption of the installed implant in the autogenous onlay block bone grafts was 0.98 mm after 3 months, which was significantly higher than that of a particulated bone graft (0.74 mm) (P <0.05). Conclusion: An autogenous graft including block type and particulate type is a predictable procedure for the use of dental implants in a severely atrophic mandible. Implant placement in augmented areas show a relatively high survival and minimal bone loss, as revealed by a radiologic evaluation.