Journal of Technologic Dentistry (대한치과기공학회지)

Korean Academy of Dental Technology (대한치과기공학회)
권호 표지
DOI QR코드

DOI QR Code

Comparative Study on the Color Stability of Temporary Prosthetic Materials for Dental CAD-CAM

치과 CAD-CAM용 임시 수복재의 색 안정성 비교 연구

  • Lee, Hye-Eun (Department of dental Technology, Kyung-dong University) ;
  • Kim, Won-Soo (Department of dental Technology, Dae-jeon health science of college) ;
  • Kim, Jung-suk (Department of dental Technology, Dae-jeon health science of college) ;
  • Lee, Ju-hee (Department of dental Technology, Dae-jeon health science of college) ;
  • Won, Seuck-Jae (Department of dental Technology, Dae-jeon health science of college)
  • 이혜은 (경동대학교 치기공과) ;
  • 김원수 (대전보건대학교 치기공학과) ;
  • 김정숙 (대전보건대학교 치기공학과) ;
  • 이주희 (대전보건대학교 치기공학과) ;
  • 원석재 (대전보건대학교 치기공학과)
  • Received : 2016.06.27
  • Accepted : 2016.09.27
  • Published : 2016.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose: This study was conducted to examine the color stability of temporary prosthetic materials for dental CAD-CAM. Method: 2 kinds of existing acrylic resin temporary filling materials and 2 kinds of polymer prosthetic materials for dental CAD-CAM were used for testing, and five specimens respectively were absorbed in soy sauce, red pepper paste, and coffee. A Chroma Meter was used as analysis equipment. The color change of the specimens was observed to calculate ${\Delta}E$ value throughout 2 days, 3 days, 4 days, and 5 days and this was analyzed and the following result was obtained. Results: Snap's ${\Delta}E$ value was bigger than Vipi block(p<0.05). Red pepper paste had the largest impact on the color change of resin(${\Delta}E$), followed by soy sauce and coffee(p<0.000). With the passage of time, ${\Delta}E$ value was inversely(-) related and decreased somewhat(p<0.000).

Keywords

References

  1. Ameye C. Lambrechts P, Vanherle G. Conventional and microfilled commposite resins. Part I: Color stability and margin adaptation. J Prosthet Dent, 46, 623-630, 1981. https://doi.org/10.1016/0022-3913(81)90068-8
  2. Asmussen E. An accelerated test for color stability of restorative resins. Acta Odont Scand, 39, 329-333, 1981. https://doi.org/10.3109/00016358109162704
  3. Burgess JO, Haveman CW, Butzin C. Evaluation of resins for provisional restorations. Am J Dent, 5(3), 137-139, 1992.
  4. Cho EY. A Study on heat transfer to the implant bone interface during fabrication of provisional restorations using autopolymerizing acrylic resin. Korea University, 2010.
  5. Crispin BJ, Caputo AA. Color stability of temporary restorative materials. J Prosthet Dent, 42, 27-33, 1979. https://doi.org/10.1016/0022-3913(79)90326-3
  6. Fusayama T, Hirano T, Kono A. Discoloration test of acrylic resin filling by an organic dye. J Prosthet Dent, 25, 532-539, 1971. https://doi.org/10.1016/0022-3913(71)90211-3
  7. Ha JY. Mechanical Properties and Exothermic Behavior of Provisional Restoration Materials. Kyungpook National University, 2009.
  8. Hwang SH, Yu JS, Han YK. The Effect of Various Coffees on the Color Stability of Self-cured Temporary Crown Resin. J Dent Hyg Sci, 342-347, 2012.
  9. Iazzetti G, Burgess JO, Gardiner D, Ripps A. Color stability of fluoride-containing restorative materials. Oper Dent, 25, 520-525, 2000.
  10. Imirzaliioqlu P, Karacaer O, Yimaz B, Ozmen Msc I. Color stablity of acrylic resins and a soft Imning against tea, coffee and nicotine. J Prosthodont. 19(2), 118-124, 2010. https://doi.org/10.1111/j.1532-849X.2009.00535.x
  11. Jeon YM, Lim HS, Shin SY. The effect of Femented foods on the Color and hardness Change of denture base Acrylic Resins. J Korean Acad Prosthet Dent, 42(2), 344-355, 2004.
  12. Jun SK, Wo HS, Kim DE, Lee HH. Effect of surface condition and food solution on the color stability of dental composite resins. Kor J Dent Meter. 42(4), 67-68, 2015.
  13. Jung HJ. Evaluation of the Color Stability of Light Cured Composite Resins according to the Resin Matrices. Chonnam National University, 2012.
  14. Jung YJ, Lim JH, Jo IH, Lim HS. Color Stability of CEROMERs in Three Food Colorants. J Korean Acad Prosthet Dent, 41(2), 136-147, 2003.
  15. Kang BD, Choi JY, Chang WG, Lim BS, Rhee SH, Yang HC. Evaluation of Color Stability of Esthetic Restorative Materials as Simulated Oral Environments. Kor J Dent Mater, 36(4), 265-275, 2009.
  16. Kang ES, Jeon YC, Jeong CM. The Color Stability of Direct Denture Reline Resins. J Korean Acad Prosthet Dent. 41(2), 160-168, 2003.
  17. Kim HM. Effect of powder/liquid ratio of temporary crown and fixed partial denture materials on the water sorption and fracture toughness. Korea University, 2009.
  18. Kim HR, Kim SC, Lee HH. Mechanical properties of polymer prosthetic materials for dental CAD-CAM. Kor J Dent Mater, 42(Special Issue), November, 2015.
  19. Kim YM. Color stability of four different artificial teeth against various food solutions. Dankook University, 2014.
  20. Koumjian JH, Nimmo A. Evaluation of fracture resistance of resins used for provisional restorations. J Proshtet Dent, 64(6), 654-657, 1990. https://doi.org/10.1016/0022-3913(90)90290-S
  21. Lee YI. The effect of various foods on the color stability of artificial teeth. Dankook University, 2008.
  22. Lieu C. Nguyen TM. Payant L. In vitro comparison of peak polymerization temperature of 5 provisional restoration resins. J Can Dent Assoc, 67, 36-37, 2001.
  23. Oyaed H. Ruyter IE. Water sorption and filler characterisitcs of composites for use in posterior teeth. J Dent Res. 65(11), 1315-1318, 1986. https://doi.org/10.1177/00220345860650110601
  24. Park JW. Color Stability of self cured Temporary Crown Resin according to the Surface Treatment. Hanseo University, 2015.
  25. Pollack BF, Blitzer MH. Discoloration in composite and microfill resins, Gen Dent, 32(2), 130-133, 1984.
  26. Reptis CN, Powers JM, Fan PL, Yu R, Staining of compositeresins by cigarette smoke. J Oral Rehabil, 9(4), 367-371, 1982. https://doi.org/10.1111/j.1365-2842.1982.tb01025.x
  27. Rosentritt M, Esch J, Behr M, Leibrock A, Hendel G, In vivo color stability of resin composite veneers and acrylic resin teeth in removavle partial dentures. Quintessence Int, 29(8), 517-522, 1998.
  28. Ruyter IE, Nilner K, Moller B. Color stability of dental composits resin materials for crown and bridge veneers. Dent Mater, 3, 246-251, 1987. https://doi.org/10.1016/S0109-5641(87)80081-7
  29. Shin MR, Cho HW, Jin TH. The Color Stability of porcelain repair composite resins. J Korean Acad prosthodet Dent, 29(3), 171-179, 1991.
  30. St Germain H, Swartz ML, Phillips RW, Moore BK, Roberts TA. Properties of microfilled composite resins as influenced by filler content. J Dent Res. 64(2), 155-160, 1985. https://doi.org/10.1177/00220345850640021301
  31. Tjan AH1, Castelnuovo J, Shiotsu G. Marginal fidelity of crowns fabricated from six proprietary provisional materials. J Prosthet Dent, 77(5), 482-485, 1997. https://doi.org/10.1016/S0022-3913(97)70140-9
  32. Venz S, Antonucci JM. Effect of photoaccelerators on curing and discoloration of composites. J Dent Res, 66(Special issue), 246, 1987.