• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5079-5086
• /
• 2011

The purpose of this study was to examine the oral health status and knowledge of dental laboratory technology student for the community to improve oral health and oral health education to help. The subjects in this study were 160 students in dental laboratory technology at the University located in Chung-cheong and surveyed from November 2010 to December 2010. The finding of the study were as follows: The differences in oral care knowledge according general characteristics of subjects was statistically significant to the gender was higher in men than women, age was higher and higher the grade was higher in grade level(p<0.05). The differences in oral care knowledge according oral health status of subjects was statistically significant to regarding the frequency of tooth brushing was highest rate in five times, method was on the side tooth higher and using the dental floss and interdental brush are used by the higher availability(p<0.05). Thus, in the classroom oral health education and continuous learning from the people know that oral health care could differ. Oral health education in local communities to increase opportunities and people will need to improve oral health.

• Journal of Technologic Dentistry
• /
• v.4 no.1
• /
• pp.5-7
• /
• 1982

This study was performed to examine the effect of repeated firing on porcelain color stability. Sixty sepcimens of generally uniform size and shape(9.7 12mm)were prepared using the manufactorer's specifications and among them 50 specimens that showed no defect after firing procedure were selected. All samples, abraded with sandpaper disc, ultrasonically cleaned, and air fired to amedium glaze were devided into 10 groups according to the number of repeated firing and, upon completion, mounted on a 13 by 16cm board. 30 persons(five dentists, ten dental techanicians, and fiftheen students) were asked to compare the samples for variations, in hue, chroma and value under natural and artificial light. The results were as follows:(1) There were no color change detected in the first four firings.(2) Slight color change were noticed in subsequent firings(ie: greater decreases in value with slight increases In chroam)(3) However, the hue remained constant in all 10 groups after repeated firings.

• Journal of Technologic Dentistry
• /
• v.37 no.1
• /
• pp.1-7
• /
• 2015

Purpose: The aim of this study was to evaluate the marginal and internal gap of wax copings fabricated from extraoral scanning with intraoral scanning. Methods: Fifteen study models(abutment of teeth 16) were made by PMMA. STL files of thirty abutment were prepared by intraoral scanning with extraoral scanning. Wax copings of thirty fabricated using CAD/CAM system. Marginal and internal gap of wax copings of thirty were measured by silicone replica technique and digital microscope(${\times}140$). Date were analyzed by using independent samples t-test. Results: Mean (SD) of two group were measured $55.61(27.42){\mu}m$ for totally gap of ES group and $60.67(33.14){\mu}m$ for totally gap of IS group. But marginal and internal gap of two group were not differences statistically significant(p>0.05). Conclusion: Evaluation of marginal and internal gap of two group showed that no differences statistically significant and clinically acceptable results.

• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.23-34
• /
• 1989

The great sudenn change of circle of dental laboratory technology brought mary discord between the new growing environmental group and the old group, In order to know the satisfactory degree of dental laboratory heads about all dental College, This Study was conducted for 49 detal technicians who graduated from junior laboratory heads in Seoul and Kyoung Gi area. The results are abtained as follow- 1. By age The degree of Satisfaction of items about all graduate dental technician were "41$\sim$45 age" group 26.53%), "46$\sim$50 age" group 22.45%, "36$\sim$40 age" group 18.36%, "31$\sim$35 age" group 12.24%, "51$\sim$55 age" group and "56$\sim$60 age" group 8.16% 60$\sim$age group 4.08% in order. 2. By Job Career. The Highest degree item out of Satisfaction about all graduated dental dental technician was 21$\sim$25 years group 28.5%, 16$\sim$20 years 20.4%, 11$\sim$15 years group 12.24%, 26$\sim$20%, 6$\sim$10 years group 4.08%, below 5 years group 2.04% in order. 3. By managing term of respondent's dental laboratory. The Satisfactory degree of items about all gradate technician were 7$\sim$10 years group 36.73% over 15 years group 22.45%, 11$\sim$14 years group 20.41%, 3$\sim$6 years group 14.29% below 2 years group 6.12% in order 4. By dental technician number of respondent's dental laboratory. The satisfactory degree intems about man were as follow; 6$\sim$9 persons group is 42.86 % The Satisfactory degree items about woman were one persons group in 34.69% 5. By born place The dental laboratory heads mean of inters about all dental technician were Seoul group 20.64 %, Kyoung Gi 17.20 %, Jen Nam group 14.99 % Chung Nam 9.5%in order 6. The satisfactory degree of items about all graduate dental technician were neither good nor bad group 32.65%, bad 6.12%, By ability of adaptaton, The satisfactory degree items about man were neither good nor bad group 42.86%, bad group 40.82%. The satisfactory degree of items about woman were neither good nor bad group 40.82% bad group 36.73%. 7. By sincerity. The satisfactory degree of items about man dental technician who graduated from Junior College were neither good nor bad group 52.02%, bad group 4.08, The satisfactory degree about woman dental technician graduated from Junior College were neither good nor bad group 42.86%, bad group 6.12%. 8. By ability of basical of items about man were bad group 40.82 %. The satisfactory degree about woman were 46.94%. 9. By cooperation relation ship. The satisfactory degree of items about man were neither good nor bad group 42.86%, bad group 10.20%. The satisfactory degree about woman were neither good nor bad group 42.86%, bad group 10.20 %. 10. By ability of work. The satisfactory degree of items about man were neither good nor bad group 48.98%, bad group 4.08%. The satisfactory degree about woman were neither good nor bad group 42.86%, bad group 6.12 %. 11. By the curriculum of the dental technician. The satisfactory degree of items about man were neither good nor bad group 67.35%, bad group 2.04%, The satisfactory degree about woman were neither good nor bad group 61.22%, bad group 6.12%. 12. By occupational satisfaction. The satisfactory degree of items about all graduate dental technician were fatisfied group 14.29%. By the out look of employment. The satisfactory degree of items about man greduate dental technician were neither good nor bad group 34.69 %, bad group 10.20%, about woman graduate dental technician were neither good nor bad group 44.90%, bad group 10.20%, Their employment prospect is not so bright or oprimistic due to the glut supply by graduates in the job-seeking market 13. The satisfactory rate on the artificial dental manufacturing world in terms of effects produced by juror College graduate dental technicians shared good group 40.82% bad group 2.04% 14. By cognition of the number of graduate dental technician. The satisfactory degree of dental laboratory heads about man graduate dental technician were too many group 38.78%, few group 6.12% about woman graduated dental technician were neither good nor bad group 30.6% few group 10,20%, The employment opportunities for the artifical dental technicians are getting decreased because of their excessive cumber in supply 15. The opinion regarding the initial salary. ranging from \160,000 to \200,000 for the junior college graduate dental technicians shared 57.14%. The top ratio, while the satisfaction reate on the academic study period of "3-year" group shared 22%, also the top ratio. 16. The improvement policy and prblematic issues presonted by the owner and operatore of atriticial dental manufacturing plants are as shown below First; The viewpoint that they contribute to the improvement of people's oral health in terms of their mission as artificial dental technicians. Second: The cultivation of basic technical ability to cope with clinical practice upon graduation Third; They require guidance in study and research in their filed of profession, that tray may beable to estaclish a from theory.

• Journal of Periodontal and Implant Science
• /
• v.46 no.6
• /
• pp.362-371
• /
• 2016

Purpose: The increasing demand for esthetically pleasing results has contributed to the use of ceramics for dental implant abutments. The aim of this study was to compare the biological response of epithelial tissue cultivated on lithium disilicate ($LS_2$) and zirconium oxide ($ZrO_2$) ceramics. Understanding the relevant physicochemical and mechanical properties of these ceramics will help identify the optimal material for facilitating gingival wound closure. Methods: Both biomaterials were prepared with 2 different surface treatments: raw and polished. Their physicochemical characteristics were analyzed by contact angle measurements, scanning white-light interferometry, and scanning electron microscopy. An organotypic culture was then performed using a chicken epithelium model to simulate peri-implant soft tissue. We measured the contact angle, hydrophobicity, and roughness of the materials as well as the tissue behavior at their surfaces (cell migration and cell adhesion). Results: The best cell migration was observed on $ZrO_2$ ceramic. Cell adhesion was also drastically lower on the polished $ZrO_2$ ceramic than on both the raw and polished $LS_2$. Evaluating various surface topographies of $LS_2$ showed that increasing surface roughness improved cell adhesion, leading to an increase of up to 13%. Conclusions: Our results demonstrate that a biomaterial, here $LS_2$, can be modified using simple surface changes in order to finely modulate soft tissue adhesion. Strong adhesion at the abutment associated with weak migration assists in gingival wound healing. On the same material, polishing can reduce cell adhesion without drastically modifying cell migration. A comparison of $LS_2$ and $ZrO_2$ ceramic showed that $LS_2$ was more conducive to creating varying tissue reactions. Our results can help dental surgeons to choose, especially for esthetic implant abutments, the most appropriate biomaterial as well as the most appropriate surface treatment to use in accordance with specific clinical dental applications.

• Journal of Technologic Dentistry
• /
• v.31 no.4
• /
• pp.9-15
• /
• 2009

The purpose of this study was to observe the change of mechanical property and microstructure in porcelain fused to gold alloy by heat treatment. PFG alloys are composed with Au-Pd-Ag alloy of the additional elements with indium, tin and copper. Specimens were tested in hardness using vicker,s micro-hardness tester and the surface micro structural changes were analysed by SEM and EDS. The results were as fellows: 1. The vickers hardness showed highest in Au-Pd-Ag alloy of the additional element with tin. 2. By hardening-oxiding result, the vicker,s hardness increased in additional element with tin but there was no significant difference in additional elements with indium and copper. 3. The surface oxide layer of Au-Pd-Ag alloy with added indium and tin increased but there was small change in additional element with copper. 4. The elements of indium and tin increased with increasing heat treatment in the surface alloy.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.17-22
• /
• 2008

The purpose of this study was to observe the thermal expansion of the inlay waxes at temperature. Inlay pattern wax shows not only a high coefficient of expansion but also a tendency to warp or distort when allowed to stand unrestrained. The thermal expansion of inlay waxes was tested according to the treatment conditions for 10 minutes at $40^{\circ}C$ The thermal expansion of inlay waxes at various temperatures was measured with an electro dial gauge. The results were as fellows: 1. It is shown that the rate of thermal expansion of wax A is 0.2%, wax B is 0.29%, wax C is 0.38%, and wax D is 0.22% at $40^{\circ}C$ 2. It is shown that the coefficient of thermal expansion of wax A is $106{\times}10^{-6}/^{\circ}C$, wax B is $152{\times}10^{-6}/^{\circ}C$, wax C is $199{\times}10^{-6}/^{\circ}C$, and wax D is $116{\times}10^{-6}/^{\circ}C$ at $40^{\circ}C$ 3. The thermal expansion of the inlay waxes at $40^{\circ}C$ was shown to increase in the order of wax C, B, D, A.

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.87-96
• /
• 1999

In order to examine the influence of sprue(used to make crown supplements) on casting, 3 kinds of sprue materials(wax, wood, plastic) and 3 types of sprue(round, square, triangle) were made and buried and cast, then the comparison and analysis of casting characters among sprue materials and among sprue type show the following results : 1. The comparison of casting characters in accordance with sprue materials shows wax sprue of 83.3%, wood sprue 81.3%, and plastic sprue of 80.7%, Wax sprue was the bast materials for casting, However there was no statistically significant difference of casting characters among was, plastic and wood. 2. The comparison of casting in accordance with sprue types shows square sprue of 94.0%, round sprue of 86.9% and triangle sprue of 84.2%. square sprue had a best casting character. 3. When a ring cast using wood sprue was classified from burying materials. its cutting of casting body and sprue indicated much more than any other sprue material. It seems to be caused by the influence of wood residuals and carbon occurrence.

• Journal of Technologic Dentistry
• /
• v.40 no.4
• /
• pp.225-230
• /
• 2018

Purpose: The purpose of this study was to evaluate the effect of denture cleansers on the flexural bond strength of heat curing denture base resin and reliners. Methods: The denture base resin was bonded to the reliners(vertex self curing, kooliner, rebase II) to make the specimen. The specimens were immersed in denture cleansers(Polident, Cleadent) and evaluated after 1week, 3week, 5weeks. After denture reliners were injected, flexural bond strength was measured. Results: The bond strength of denture base resin and vertex self curing resin as reliner was significantly decreased at 5 weeks in cleadent and polident(p<0.05). The bond strength of kooliner and rebase II was significantly decreased at 5 weeks in denture cleaners(p<0.05). Kooliner was significantly decreased at 3 and 5 weeks in polident and rebase II was significantly decreased at 3 and 5 weeks in all denture cleansers(p<0.05). Conclusion : The flexural strength between the denture base resin and the reliners decreased significantly as the treatment time increased.

• Journal of Technologic Dentistry
• /
• v.43 no.2
• /
• pp.70-70
• /
• 2021