• The Journal of Advanced Prosthodontics
• /
• 제12권6호
• /
• pp.344-350
• /
• 2020

PURPOSE. Recently introduced hybrid and reinforced glass ceramic computer-aided design/computer-aided manufacturing (CAD/CAM) materials have been used for full-coverage restorations. However; the effect of adjustment and type of materials on internal and marginal adaptation are unknown. This study aimed to evaluate and compare the marginal and internal adaptations of crowns made of three different CAD/CAM materials before and after adjustment. MATERIALS AND METHODS. One acrylic resin maxillary first molar was prepared and served as the master die. Thirty-six restorations were fabricated using CAD/CAM system (CEREC Omnicam, MCXL) with three materials including lithium disilicate (IPS e.max CAD), zirconia-reinforced lithium silicate (Suprinity), and hybrid ceramic (Enamic). Internal and marginal adaptations were evaluated with the reference point matching technique before and after adjustment. The data were analyzed using mixed ANOVA considering α=.05 as the significance level. RESULTS. The effect of adjustment and its interaction with the restoration material were significant for marginal, absolute marginal, and occlusal discrepancies (P<.05). Before adjustment, Suprinity had lower marginal discrepancies than IPS e.max CAD (P=.18) and Enamic (P=.021); though no significant differences existed after adjustment. CONCLUSION. Within the limitations of this study, crowns fabricated from IPS e.max CAD and Suprinity resulted in slightly better adaptation compared with Enamic crowns before adjustment. However, marginal, axial, and occlusal discrepancies were similar among all materials after the adjustment.

• 구강회복응용과학지
• /
• 제39권3호
• /
• pp.158-167
• /
• 2023

최근 치의학 분야에서 디지털 기술이 발달함에 따라 computer-aided design-computer-aided manufacturing (CAD/CAM)을 이용한 의치 제작 진료 단계의 변화를 가져왔다. CAD/CAM 기술을 이용한 의치 제작 방식은 제작기간과 내원 간격의 단축으로 임상적인 효율성과 편리함을 제공함과 동시에 기공을 단순화하여 오류 발생을 감소시켰다. 본 증례는 복잡한 병력과 신체적 장애를 가진 환자에게 기존의 임시의치를 디지털 방식으로 복제 및 출력하여 개인 트레이로 활용하였고, 부가중합형 실리콘 인상재로 채득한 최종 인상체에는 수직고경과 중심위, 상악 전치부의 각도 및 길이에 대한 정보가 포함되어 있으며 이를 통해 제작 기간과 내원 간격을 단축하여 환자의 만족도를 높일 수 있었다. 최종 의치는 밀링 방식 및 monolithic disc를 이용하여 제작하였고, 적절한 안정과 유지, 지지를 보여 기능적, 심미적으로 만족스러운 결과를 얻을 수 있었다.

• 치위생과학회지
• /
• 제15권1호
• /
• pp.12-17
• /
• 2015

본 연구에서는 치과 CAD/CAM 시스템을 이용하여 SM 가공 방식으로 코핑을 제작 후 주조한 금속 코핑과, AM 가공 방식으로 코핑을 제작 후 주조한 금속 코핑과의 변연 및 내면 적합도를 비교 평가하여 다음과 같은 결과를 얻었다. SM 가공 방식과 AM 가공 방식의 변연 적합도 부분에서는 $120{\mu}m$ 임상적 허용 범위에 존재하였다. SM 가공 방식과 AM 가공 방식의 변연 적합도 및 내면 적합도는 통계적으로 유의한 차이가 있는 것으로 나타났다(p<0.05). SM 가공 방식과 AM 가공 방식으로 제작된 두 그룹의 전체 적합도와 4부분 부위별 적합도 측정은 SM 가공 방식보다 AM 가공 방식이 우수하였다. 결론적으로 금속 코핑의 변연 및 내면 적합도는 SM 가공 방식보다 AM 가공 방식이 우수하였고, 그 결과 값들은 임상적 허용범위 안에 존재하였다. 앞으로 치과분야에서 AM 가공 방식에 관한 연구는 계속되어야 하며, 보다 완성도 높은 금속 코핑 제작이 가능하다고 생각된다.

• 대한치과보철학회지
• /
• 제61권1호
• /
• pp.44-54
• /
• 2023

기능적이고 심미적인 보철물을 제작하기 위해서 환자의 교합평면에 관한 정보를 정확하게 전달하는 과정은 필수적이다. 특히, 완전 무치악 환자의 경우 교합평면은 의치가 연조직을 올바르게 지지하고 안모와 심미적 조화를 이루며 제대로 된 발음을 할 수 있도록 중요한 기준을 제시하고, 안정적인 저작작용을 위한 균형 있는 교합관계를 형성하는데 매우 중요한 역할을 한다. 전통적으로 환자의 악간 관계와 교합평면에 대한 정보를 진료실에서 기공실로 전달하기 위해 교합기에 연결하여 사용하는 다양한 안궁(facebow) 시스템을 이용하였으나, CAD 상으로 이를 옮기는 과정에서는 여러 한계점이 있었다. 이 과정을 단순화하기 위하여 최근 조립식의 POP(PNUD Occlusal Plane) Bow system이 개발되었다. 본 증례에서는 완전 무치악 환자의 치료 과정에서 POP Bow system을 적용하여 환자의 교합평면 정보가 잘 반영된 CAD-CAM(Computer-aided design-computer-aided manufacturing) 치료 의치를 제작하였고, 심미적이고 기능적인 만족도를 얻을 수 있었다.

• 대한치과기공학회지
• /
• 제44권2호
• /
• pp.31-37
• /
• 2022

Purpose: The aim of this study was to evaluate the accuracy of provisional crowns manufactured using a milling machine and a digital light processing (DLP) printer. Methods: A full-contour crown was designed using computer-aided design software. Provisional crowns of this design were manufactured using a milling machine and using a DLP three-dimensional (3D) printer (N=20). The provisional crowns were digitized with an extraoral scanner, and 3D deviation analysis was applied to the scanned data to confirm their accuracy. An independent t-test was performed to detect the significant differences, and the Kolmogorov-Smirnov test was used for analysis (α=0.05). Results: No significant differences were found among the precision of marginal surface between the printed and milled crowns (p=0.181). The trueness of marginal and internal surfaces of the milled crowns were statistically higher than those of the printed crowns (p=0.024, p=0.001; respectively). Conclusion: The accuracy of provisional crowns manufactured using a milling machine and a 3D printer differed significantly except with regards to the precision of the internal surface. However, all the crowns were clinically acceptable, regardless of the manufacturing method used.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.23.1-23.9
• /
• 2019

Objectives: The aim of this study was to investigate the microshear bond strength (${\mu}SBS$) of different universal adhesive systems applied to hybrid computer-aided design/computer-aided manufacturing (CAD-CAM) restorative materials repaired with a composite resin. Materials and Methods: Four types of CAD-CAM hybrid block materials-Lava Ultimate (LA), Vita Enamic (VE), CeraSmart (CS), and Shofu Block HC (SH)-were used in this study, in combination with the following four adhesive protocols: 1) control: porcelain primer + total etch adhesive (CO), 2) Single Bond Universal (SB), 3) All Bond Universal (AB), and 4) Clearfil Universal Bond (CU). The ${\mu}SBS$ of the composite resin (Clearfil Majesty Esthetic) was measured and the data were analyzed using two-way analysis of variance and the Tukey test, with the level of significance set at p < 0.05. Results: The CAD-CAM block type and block-adhesive combination had significant effects on the bond strength values (p < 0.05). Significant differences were found between the following pairs of groups: VE/CO and VE/AB, CS/CO and CS/AB, VE/CU and CS/CU, and VE/AB and CS/AB (p < 0.05). Conclusions: The ${\mu}SBS$ values were affected by hybrid block type. All tested universal adhesive treatments can be used as an alternative to the control treatment for repair, except the AB system on VE blocks (the VE/AB group). The ${\mu}SBS$ values showed variation across different adhesive treatments on different hybrid CAD-CAM block types.

• 대한치과보철학회지
• /
• 제55권3호
• /
• pp.279-285
• /
• 2017

구강암에 대한 외과적 처치로 구강 내 광범위한 경조직, 연조직을 제거한 환자는 저작, 연하, 발음 등의 기능적 문제와 치열, 안모의 심미적 문제를 갖게 된다. 악골 재건 후에도 치조골 등 합병증으로 인해 가철성 보철물의 유지 및 지지를 받는데 제한적이다. 임플란트 지지 고정성 보철물은 이러한 환자들에게 적절한 보철수복 방법이 되어 왔다. 본 증례는 하악 재건 후 computer-aided design과 computer-aided manufacturing을 이용하여 지르코니아 프레임워크 상부에 단일 구조 지르코니아 크라운을 제작하여 현재 치열의 기능적, 심미적 회복을 하여 이에 보고하고자 한다.

• Journal of Korean Dental Science
• /
• 제15권2호
• /
• pp.166-171
• /
• 2022

This case report describes a dynamic digital esthetic rehabilitation procedure that integrates a new three-dimensional augmented reality (3D-AR) technique to treat a patient with multiple missing anterior teeth. The prostheses were designed using computer-aided design (CAD) software and virtually trialed using static and dynamic visualization methods. In the static method, the prostheses were visualized by integrating the CAD model with a 3D face scan of the patient. For the dynamic method, the 3D-AR application was used for real-time tracking and projection of the CAD prostheses in the patient's mouth. Results of a quick survey on patient satisfaction with the two visualization methods showed that the patient felt more satisfied with the dynamic visualization method because it allowed him to observe the prostheses directly on his face and be more proactive in the treatment process.

• 대한치과의사협회지
• /
• 제56권11호
• /
• pp.622-630
• /
• 2018

For successful surgery-first approach, accurate prediction of skeletal and dental changes following orthognathic surgery is essential. With recent development of digital technology using computer-aided design/computer-aided manufacturing (CAD/CAM) technology, attempts to provide more predictable orthodontic/orthognathic treatment have been made through 3D virtual surgery and digital tooth setup. A clinical protocol for the surgery-first orthognathic approach using virtual surgery is proposed. A case of skeletal Class III patient with facial asymmetry treated by the surgery-first approach using digital setup and virtual surgery is presented. Advantages and limitations of applying CAD/CAM technology to orthognathic surgery are discussed.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.228-233
• /
• 2020

Purpose: This study aimed to assess and compare the marginal fit of ceramic-based hybrid resin restoration (HYB) and zirconia restoration (ZIR) for dental computer-aided design/computer-aided manufacturing systems. Methods: A stainless steel master model was produced. The impression was first made with silicone, and then stone working models were produced. A total of twenty restorations were fabricated with two different materials: ZIR and HYB. The silicone film thickness of the marginal gap was measured using a digital microscope; digital photos were taken at a magnification of ×160, and then analyzed using a measurement software. The values of the result were evaluated with the independent-sample t-test (α=0.05). All statistical analyses were performed with a statistical software. Results: The mean values for the marginal gap was 37.14±2.96 ㎛ for HYB, compared with 40.37±5.26 ㎛ for ZIR. No significant difference was found between ZIR and HYB (p=0.107). Conclusion: As a result, the marginal fit of the restoration fabricated using the hybrid resin was better than that of the restoration fabricated using zirconia. Also, the marginal fit of all groups was below the clinical acceptable range of 120 ㎛. Thus, HYB for dental CAD/CAM system in this study is expected to be suitable for clinical use in dentistry.