• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.192-195
• /
• 2003

The hight density sludge process (HDS) is a process that has been developed to achieve greatly increased sludge densities compared to those resulting from conventional pH modification systems. This study was carried out to apprehend variation of sludge properties and removal of metals during recycling of the sludge. The principal neutralization and settlement took place in neutralization beaker and mass cylinder. Sludge was recycled, as a volumetric ratios of 20%, 40% and 60%. The pH was controlled in neutralization tanks near 9.5. The average lime consumption rate was about 10g per L of AMD. The increment of sludge density was correlated with the volumetric ratios of recycled sludge.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.401-411
• /
• 1990

Deposition of diamond films on Si(100) from the mixtures of methane and hydrogen were investigated using hot W filament CVD method. The nucleation density could be increased thousandfold by surface treatment with SiC powder. Upon oxygen addition to the mixture, crystal facets became developed more clearly by selectively removing non-diamond carbons, but the film growth rate generally decreased. However, at a very high methane content(e.g. 10%), a small amount of oxygen addition has resulted in an increase in the film deposition rate presumably by promotion of methane decomposition. When the gas pressure was varied, the growth rate exhibited a maxiumum at around 20torr and the film crystallinity steadily improved with the pressure increase. The observed variation of the growth rate by oxygen addition was discussed in terms of its role in the pyrolysis and the subsequent gas phase reactions.

• 치위생과학회지
• /
• 제23권1호
• /
• pp.51-59
• /
• 2023

Background: Tea tree oil has antiviral, antimicrobial and antifungal effects and Mastic oil has antifungal and anticancer effects. For synergistic effects of oils, blending oil containing a mixture of two to three oils is recommended. This study aimed to determine the antibacterial effects of Tea tree oil, Mastic oil, and Blending oil containing the two oils in a mixture, to verify and suggest the potential use of these oils as a substance to prevent dental caries. Methods: Tea tree oil, Mastic oil, and Blending oil with a 1:1 blend of the two oils were diluted in liquid medium to 0% (negative control), 0.5%, 1.0%, and 2.0%. Streptococcus mutans was applied to each experimental group of the three diluted oils and after 8 h culture, the optical density (OD) was measured and the growth inhibition rate for S. mutans was estimated. Results: Tea tree oil had significantly low OD values across all concentrations (p<0.05) without significant variation among different concentrations (p>0.05). Mastic oil did not significantly vary in OD compared to the negative control across all concentrations (p>0.05) without significant variation among different concentrations (p>0.05). Blending oil, compared to the negative control, did not significantly vary in OD at 0.5% (p>0.05) but significant variation was found as the concentration increased (p<0.05). Additionally, for Tea tree oil and Mastic oil, the growth inhibition rate showed no significant variation according to concentration (p>0.05), whereas for Blending oil, the growth inhibition rate for S. mutans showed a significant difference at 1.0% (p<0.05) and at higher concentrations. Conclusion: Blending oil containing a Tea tree oil and Mastic oil demonstrated a significant growth inhibition effect on S. mutans from the concentration of 1.0%, which suggested its potential use as an effective antibacterial agent for dental caries.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.735-744
• /
• 2000

The electrical procerties and stability of ZnO-Pr$_{6}$O$_{11}$-CoO-Cr$_2$O$_3$-Er$_2$O$_3$ (ZPCCE) based varistors were investigated in the Er$_2$O$_3$content range of 0.0 to 4.0 mol%. ZPCCE ceramics containing 2.0 mol% Er$_2$O$_3$ exhibited the highest density of 5.74 g/㎤ corresponding to 99.3% of theoretical density. The varistors with 0.5 mol% and 2.0 mol% Er$_2$O$_3$exhibited a relatively satisfying nonlinearity, which the nonlinear exponent is 40.50 and 47.15, respectively and the leakage current is 2.66 $mutextrm{A}$, respectively. Under more severe d.c. stress, such as (0.80 V$_{1mA}$/9$0^{\circ}C$/12h)+(0.85 V$_{1mA}$115$^{\circ}C$/12h)+(0.90 V$_{1mA}$12$0^{\circ}C$/12h)+(0.95 V$_{1mA}$1$25^{\circ}C$12h), they showed a very excellent stability, which the variation rate of the variator voltage is -0.89% and -0.15%, the variation rate of the nonlinear coefficient is -4.67% and -3.56%, and the variation rate of leakage current is -6.02% and -19.56%, respectively. It is surely bellived that ZnO-0.5 mol% Pr$_{6}$O$_{11}$-1.0 mol% CoO-0.5 mol% Cr$_2$O$_3$-x mol% Er$_2$O$_3$(x=0.5, 2.0) based varistors will be greatly contributed to develop the advanced Pr$_{6}$O$_{11}$-based ZnO varistors in future.uture. future.uture.

• 소성∙가공
• /
• 제19권8호
• /
• pp.517-522
• /
• 2010

Selective laser melting (SLM) is emerged as a new manufacturing technique to directly fabricate precise parts using metallic materials. The final characteristics of a component fabricated through the SLM process are strongly dependent upon various parameters such as laser power, scan rate and pulse duration, etc. This paper, therefore, focuses on the dimensional characteristics of melted $20{\mu}m$ Fe-Cr-Ni powder by fiber laser for the selective laser melting process. With energy density decrease, the height and depth were decreased. Although the conditions are of the same energy density, the shape is different by laser power and scan rate. The shapes at various laser parameters were divided into 3 groups based on depth over height. The smooth regular shape is obtained under the conditions of $50{\mu}m$ of powder height and $15-20{\mu}s$ of pulse duration. And the laser power influenced the variation of shape more significantly than the scan rate.

• 수산해양기술연구
• /
• 제58권2호
• /
• pp.159-174
• /
• 2022

Flow prediction was carried out through observational survey and three dimensional multi-layered numerical diagnostic model experiment to clarify the time and spatial structure of tidal current and residual flow dominant in the sea exchange and material circulation of the waters around Geumo Islands in the southern waters of Korea. The horizontal variation of tidal current is so large that it causes asymmetric tidal mixing due to horizontal eddies and the topographical effect creating convergence and dispersion of flow direction and velocity. Due to strong tidal currents flowing northwest-southeast, counterclockwise and clockwise eddies are formed on the left and right sides of the south of Sori Island. These topographical eddies are created by horizontal turbulence and bottom friction causing nonlinear effects. Baroclinic density flows are less than 5 cm/s at coastal area in summer and the entire sea area in winter. The wind driven currents assuming summer and winter seasonal winds are also less than 5 cm/s and the current flow rate is high in winter. Density current in summer and wind driven current in winter have a relatively greater effect on the net residual flows (tidal residual current + density current + density driven current) around Geumo Islands Sea area.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.432-436
• /
• 2003

Geophysical well logging techniques which are useful for delineating permeability of geological formation have been reviewed. A new technique for obtaining permeability using conductivity log technique has been discussed. This conductivity logging technique has been tested by monitoring the conductivity change within the model hole using borehole environment water and incoming-outgoing water of different salinity with constant flow rate by maintaining balance between inflow and outflow. Conductivity variation features depended mainly on flow rate, density contrasts due to salinity and temperature contrasts between fluid within the hole and incoming-outgoing fluid. The results of the experiment show uniform change of fluid conductivity within bore hole with time, and a fairly good correlation between the flow rate and the conductivity change rate. This conductivity logging technique is expected to be an efficient tool for determining permeability.

• Steel and Composite Structures
• /
• 제34권6호
• /
• pp.877-889
• /
• 2020

This work features the outcomes of an empirical investigation into the characteristics of steel reinforced grout (SRG) composite - concrete interfaces. The parameters varied were loading rate, densities of steel fibres and types of load displacement responses or measurements (slip and machine grips). The following observations and results were derived from standard single-lap shear tests. Interfacial debonding of SRG - concrete joints is a function of both fracture of matrix along the bond interface and slippage of fibre. A change in the loading rate results in a variation in peak load (P_max) and the correlative stress (σ_max), slip and machine grips readings at measured peak load. Further analysis of load responses revealed that the behaviour of load responses is shaped by loading rate, fibre density as well as load response measurement variable. Notably, the out-of-plane displacement at peak load increased with increments in load rates and were independent of specimen fibre densities.

• 대한지역사회영양학회지
• /
• 제3권3호
• /
• pp.380-388
• /
• 1998

This study was conducted to investigate the distribution of bone density according to age and the prevalence rate of osteoporosis I 613, middle-aged women who visited Saint Bundo Hospital in Pusan from June to December, 1997. Mean bone density of lumbar spine(L2L4), and femoral neck of 50-59 years of age was significantly lower than those of 40-49 years of age(p<0.05). At the 60years of age, mean bone density of two sites were less than those of 50-59 years of age. Mean bone density of lumbar spine tin the group of sixties were 20.7% lower than that of group aged under 40 ; For femoral neck, women in their sixties showed 22.6% lower density compared to the women aged under forty. Bone density of ward's triangle of sixties were the least, which was 34.2% lower than that of group aged under 40. Bone density in lumbar spine, femoral neck, trochanter and ward's triangle correlates strongly with each other(p<0.001). The proportion of osteoporosis was 3.6% in the group of forties, 10.9% in the group of fifties and 33.8% for the group aged over 60, which was assessed by bone density of lumbar spine. Bone density of lumbar spine, femoral neck and ward's triangle were positively correlated with height, weight and BMI(p<0.001∼p<0.01), and weight showed highest correlation with the bone density. Forty-four percent of variation in lumbar spine bone density was explained by age and weight.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.79-83
• /
• 2009

본 연구에서 고밀도 플라즈마 식각 장치를 사용한 비정질 실리콘 막의 게이트 전극선 형성공정에서 여러 가지 식각 변수가 치수 제어와 식각 속도 및 식각 선택비 등 식각 특성에 미치는 영향을 분석하였다. $Cl_2/HBr/O_2$로 구성된 식각 기체의 전체 유량을 증가시키면 비정질 실리콘의 식각 속도가 증가하나 식각 전후의 형상치수는 변화없이 거의 일정하였다. 전체 유량을 고정시키고 $Cl_2$와 HBr 간의 유량비를 변화시키면 HBr의 유량이 커질수록 비정질 실리콘의 식각 속도가 감소하였다. $O_2$의 유량을 증가시키면 산화막의 식각 속도가 상대적으로 낮아져 식각 선택비를 증가시켜 식각 공정의 안정성을 높이나 게이트 전극선을 경사지게 하는 특성을 보인다. Source power의 증가는 비정질 실리콘 식각 속도의 증가와 더불어 형상치수의 증가를 가져오며, bias power의 증가는 비정질 실리콘과 산화막의 식각 속도를 증가시키나 식각 선택비를 크게 감소시키는 경향을 보였다.