• 산업융합연구
• /
• 제2권1호
• /
• pp.73-89
• /
• 2004

This study uses theoretical perspectives and models from organizational ecology to examine the dynamics and viability of strategic groups. Integrating the ecological perspective and the contingency theoretical view of strategic management, this study developed propositions demonstrating the impact of environmental density and variation on the effectiveness of strategic groups. Justifications for linking ecological perspectives to strategic management theory are discussed and the importance of the integrative approach to strategic management is highlighted.

• 비파괴검사학회지
• /
• 제19권5호
• /
• pp.356-362
• /
• 1999

공업용 방사선 필름의 필름 농도가 대략 3.5 이하의 농도 구간에서 상대 노출에 대해 지수 함수적으로 증가한다고 가정하여, 필름특성곡선에 관한 일반식과 두께 변화에 대한 농도 변화 관계식을 새로이 제안하였다. 연속 X-선과 $Ir^{192}$에 의한 ${\gamma}$-선으로 탄소강의 계단시편에 대해 시험한 결과, 대략 $1.0{\sim}3.5$의 농도 범위에서 두께 변화에 대한 농도의 상용 대수변화가 기존의 관계식에 비해 보다 선형적인 경향을 나타내었으며 실제 계단 시편의 치수와 제안한 관계식에 의한 평가를 비교한 결과 본 연구에서 제안한 농도-두께 관계식에 의한 결과가 기존의 관계식에 의한 결과보다 정확하였다. 그리고 시험체의 두께가 증가함에 따라 beam hardening effect에 의해 유효선흡수계수가 달라지는 연속 X-선에 비해 상대적으로 에너지 스펙트럼이 단순한 ${\gamma}$-선이 두께 평가를 위한 더 적합한 방사선원임을 확인하였다. 본 연구에서 제안한 관계식은 국부적인 부식 손상의 깊이와 분포도를 평가할 수 있으므로 압력 용기 등의 산업 설비의 건전성 평가에 활용할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.897_898
• /
• 2009

This paper deal with the shape design of the flux barrier to maximize the torque density and minimize the torque ripple in IPM type BLDC motor. The variation of magnetic torque and reluctance toque according to the flux barriers is analyzed in the 120 conducting period. From the result, we confirmed the barrier can be quite worthwhile for the better performance of IPM type BLDC motor

• 대한조선학회지
• /
• 제25권2호
• /
• pp.1-10
• /
• 1988

An axially marching numerical method is developed for the simulation of the internal waves produced by translation of a submersed vehicle in a density-stratified ocean. The method provides for the direct solution of the primitive variables [$\upsilon,\;p,\;\rho$] for the nonlinear and steady state three-dimensional Euler's equation with a non-constant density term in the vehicle-fixed cartesian co-ordinate system. By utilizing a known potential flow around the vehicle for an estimate of the axial velocity gradient, the present parabolic algorithm local upstreamwise disturbances and axial velocity variation.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권7호
• /
• pp.3229-3234
• /
• 2016

Background: Bone mineral density (BMD) is a lifetime marker of estrogen in a woman's body and has been associated with increased breast cancer risk. Nonetheless the actual association is still debatable. Furthermore, estrogen is very crucial in maintaining human bone density and gradually decreases over age. A systematic search was conducted to assess any association of BMD with breast cancer risk factors among premenopausal and postmenopausal women. Materials and Methods: Review identification was performed through databases searching on MEDLINE, CINAHL and SCOPUS and 19 qualified studies were elected. The keywords used were "bone mineral density", "breast cancer", and "breast density". Results: A total of 19 articles showed variation with the majority of the studies focused on postmenopausal and a few focused on premenopausal women. Overall there was no concensus on effects. Conclusions: An enormous effort is being undertaken by researchers to prove that BMD might be one of the significant risk factors for breast cancer.

• 소성∙가공
• /
• 제31권5호
• /
• pp.281-289
• /
• 2022

Presently, 3D printers manufactured by material extrusion are economical and easy to use, so they are being used in various fields. However, this study conducted a tensile test on the infill pattern and density of the PLA+ material, due to the limitations of long printing time as well as low mechanical strength. The infill area for the infill density change was measured, using a vision-measuring machine for four infill patterns (concentric, zigzag, honeycomb, and cross) in which the nozzle path was the same for each layer. The tensile strength/weight[MPa/g] and tensile strength/printing time[MPa/min] of the tensile specimens were analyzed. In this study, efficient infill density and patterns are suggested, for cost reduction and productivity improvement. Consequently, it was confirmed that the infill area and infill percentage of the four patterns, were not constant according to the infill pattern. And the tensile strength of the infill density 40% of the honeycomb pattern and infill density 20% of the cross pattern, tended to highly consider the weight and printing time. Honeycomb and cross patterns could reduce the weight of the tensile specimen by 19.11%, 28.07%, as well as the printing time by 29.56%, 52.25%. Tensile strength was high in the order of concentric, zigzag, honeycomb, and cross patterns, considering the weight and printing time.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권2호
• /
• pp.91-98
• /
• 1998

In this study, we carried out the experiments for measuring the variations of corrosion potential and current density for polarization curves with polyvinylchloride. The results exhibited especially the influence affecting the corrosion potential and various conditions (temperature, day, pH, bacteria, and added salt). The second anodic current density peak and the minimum passive current density are designated $I_P/I_0,$ respectively. The value of $I_P/I_O$ is used as a measurement for the extent of degradation of the polyvinylchloride. The potentiodpnamics parameters of the corrosion were obtained using Tafel equation.

• Structural Engineering and Mechanics
• /
• 제32권5호
• /
• pp.621-634
• /
• 2009

A numerical method is developed to investigate the effects of some geometric parameters and density variation on frequency characteristics of the circular and annular membranes with varying density. The discrete singular convolution method based on regularized Shannon's delta kernel is applied to obtain the frequency parameter. The obtained results have been compared with the analytical and numerical results of other researchers, which showed well agreement.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.33-36
• /
• 2016

The investigation on the verification of availability simulation for small-scale plant has been carried out. This study focuses on the availability variation induced by number of equipment and iteration with failure density function. The equipment classification of small-scale plant and failure type and the methodologies on Monte-Carlo simulation are established. The availability deviation with programs showed under Max. 1.7% for the case of normal function. This method could be used to availability evaluation of small-scale plant, but calibration of the failure density function is necessary for general application.

• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.560-566
• /
• 1997

Seeded vapor transport법에 의해 성장된 ZnSe 결정내에서 전위거동을 살펴보았다. (111)과 (100) ZnSe wafer의 etch pit 형상을 관찰하였고 성장된 결정이 높은 전위밀도를 가지면 전위들이 lineage와 cellular 두 가지 형태로 배열됨을 알았다. Seed로부터 측방성장된 부위에서 전위밀도의 변화는 없었으나 수직 성장방향으로는 전위밀도가 감소하였고, 같은 wafer내에서 전위밀도는 wafer center 지역의 전위밀도가 edge부위의 전위밀도 보다 낮았다. 성장된 결정의 평균 전위밀도는 $4{\times}10^4 /\textrm{cm}^2$이었다.