• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.487-492
• /
• 2008

In this paper, Thermocatalytic decomposition of methane in a fluidized bed reactor (FBR) was studied. The technical approach is based on a single-step decomposition of methane over carbon catalyst in air/water vapor free environment. The factors affecting methane decompostion catalyst activity in methane decomposition reactions were examined. The fluidization phenomena in a gas-fluidized bed of catalyst was determined by the analysis of pressure fluctuation properties, and the results were confirmed with characteristics of methane decomposition. The effect of parameters on the H2 yield was examined for methane decompostion. The decompstion rate was affected by the fluidization quality such as mobility, U-Umf, carbon attrition, elutriation and effectiveness density of fluidization gas.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.6
• /
• pp.1-8
• /
• 2010

The groundwater level distribution and characteristics of responses to rainfall were examined in the Haean basin of Yangu that has a single stream exit to the east. The groundwater levels showed a circular or elliptical distribution converging the center of the basin with different hydraulic gradients in the north and south regions. The waterlevel elevations exhibited a perfect correlation with topographic elevation ($r^2=0.99$) while the depth to water showed a rather weak correlation ($r^2=0.49$). The water table fluctuation (WTF) method yielded recharge ratios of 6.1~12.65% ($S_y=0.02$) and 15.2~28.5% ($S_y=0.05$). The waterlevels of HG3 well, which is much proximal to a stream, were weakly auto-correlated but they were highly sensitive to direct infiltration from the rainfall event. The shorter regulation times of the HG3 represented a quicker dissipation of the input stress (rainfall).

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1237-1240
• /
• 2010

본 연구에서는 유동층반응기를 이용하여 왕겨의 탄화반응을 수행하였다. 탄화반응은 내경 40mm, 높이 1.8m의 유동층을 사용하였으며, 분산판은 다공성 스테인레스스틸을 사용하였다. 탄화반응은 질소를 이용하여 수행하였다. 왕겨 주입입자 크기는 직경 2.0mm, 0.715mm, 0.359mm, 0.194mm를 각각 사용하였으며, 유동층의 온도는 $400^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, $700^{\circ}C$에서 탄화특성을 측정하였다. 또한 유동층의 매질로는 직경 1.0mm의 Co-Mo-Fe/$Al_2O_3$ 촉매를 사용하였으며, 탄화물은 유동층상부에 설치된 사이크론에 의하여 포집분리되었다. 탄화시 유동층 내부의 현상을 압력요동을 이용하여 해석하였으며, 압력신호로부터 평균압력, 압력요동의 표준편차, 주진동수, power spectrum density function을 계산하여 층내현상을 해석하였다. 층내온도, 유동화속도, 공급 입자크기에 따른 층내현상을 압력요동특성치를 이용하여 해석할 수 있었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.5
• /
• pp.510-520
• /
• 2010

This study investigated the community structure and seasonal variation of the fish assemblages on Jangbong tidal flat, Incheon, Korea. Fish were collected monthly using a small otter trawl from November 1999 to January 2001. Thirty-six fish species were recorded, with a mean density of 185 individuals and biomass of 2,594.3 gWWt. The most abundant species by number were Johnius grypotus (23.7%), Acanthogobius hasta (17.8%), and Cynoglossus joyneri (10.7%), while the dominant species by catch weight were Acanthogobius hasta (21.2%), Sebastes schlegeli (16.2%), J. grypotus (14.0%), and C. joyneri (10.8%). Cluster analysis and non-metric multi-dimensional scaling (nMDS) were applied to assess the seasonal fluctuation in the fish assemblages. Based on the result of the cluster analysis and nMDS ordination, the faunal group could be divided into cold- and warm-water specialist groups. The cold-water specialists included A. hasta, Acanthogobius luridus, Triaenopogon barbatus, Tridentiger trigonocephalus, and Liza haematocheila. The warm-water specialists were J. grypotus, C. joyneri, S. schlegeli, and Hexagrammos otakii. In conclusion, the community structure showed a distinct seasonal trend, which seemed to be related to the seasonal fluctuations in water temperature.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.67-70
• /
• 2007

As construction industry is requiring competitive power and technique in national construction market with rapid fluctuation of construction environment and development, requirements upgrading performance in construction materials are increasing. But, national lightweight aggregate and lightweight concrete's inappropriateness when produced are also increasing. And there are not international standard of aggregates in using these construction materials because standards and characteristics of aggregate in each countries are different. Therefore, in this study, lightweight aggregate acquired due to wide range of use is tested and mixed for concrete to gain practicality and set the authorized manual in international. Also, basic data will be proposed to set a standard for concrete by analyzing lightweight aggregate characteristics. When lightweight aggregate absorptivity is high, concrete shows low strength and when it's density is low, concrete shows low weight of unit volume. Furthermore, compressive strength of lightweight aggregate is steep in first and longtime material age is tendency to cause low strength increasing rate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.55-56
• /
• 2000

We report the fabrication of carbon nanostureture films with excellent electron-emission characteristics on chrome electrodes using a pre-deposited transition metal catalyst layer. The emission current densities of 1 ${\mu}A/cm^2$ and 1 $mA/cm^2$ were measured at the electric field of 2.5 and 4.8 $V/{\mu}m$, respectively, and the current fluctuation of less than 2.5% was observed at the average current density 211 ${\mu}A/cm^2$ for the measurement duration of 20 minutes. We counted more than ${\sim}10^4$ emission sites per $cm^2$ from the emission images, and also noticed good mechanical stability. Moreover, we were able to fabricate good electron-emitting carbon films on chrome electrodes on Corning glass substrates at the nominal temperature below $650^{\circ}C$.

• KIEAE Journal
• /
• v.11 no.3
• /
• pp.31-36
• /
• 2011

People spend most of their time inside buildings recently, so the indoor air quality is one of the most important factors to human health. Furthermore, minimum energy use with proper ventilation systems for pleasant indoor environment is necessary because of energy shortage over the world. The concern to maintain proper indoor air quality at home has been increased, and a proper indoor air quality is continuously requested by the residents. By measuring and analyzing the density fluctuation of $CO_2$ through indoor humidity and testing personal reactions regarding comfort condition, we can obtain a way to effective ventilation. Heat and carbon dioxide emissions from resident's metabolism and construction materials could be the causes of indoor air pollution. If these materials stay indoors for a long time, it could directly influence the resident's health condition with diseases. It also leads massive energy use. Therefore, the way to save energy and to have effective control of indoor ventilation is needed. This study presented the control method of bedroom ventilation by $CO_2$ concentration change and subjective evaluation.

• Nuclear Engineering and Technology
• /
• v.46 no.4
• /
• pp.513-520
• /
• 2014

In this paper, three types of operational and industrial absorbers used at research reactors, including Ag-In-Cd alloy, $B_4C$, and Hf are selected for sensitivity analyses. Their integral effects on the main neutronic core parameters important to safety issues are investigated. These parameters are core excess reactivity, shutdown margin, total reactivity worth of control rods, thermal neutron flux, power density distribution, and Power Peaking Factor (PPF). The IAEA 10 MW benchmark core is selected as the case study to verify calculations. A two-dimensional, three-group diffusion model is selected for core calculations. The well-known WIMS-D4 and CITATION reactor codes are used to carry out these calculations. It is found that the largest shutdown margin is gained using the $B_4C$; also the lowest PPF is gained using the Ag-In-Cd alloy. The maximum point power densities belong to the inside fuel regions surrounding the central flux trap (irradiation position), surrounded by control fuel elements, and the peripheral fuel elements beside the graphite reflectors. The greatest and least fluctuation of the point power densities are gained by using $B_4C$ and Ag-In-Cd alloy, respectively.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.275-282
• /
• 2011

A core device of foam system is the in-line eductor and it is the device to mix the foam liquid into liquid solution proper to the use density and the mixture ratio must be kept regularly regardless of changing fluid condition of the front and rear end of the in-line eductor. However, if the flux of the pressurized water changes, the mixture ratio is not kept regularly, and so it becomes a cause which a performance of fire-extinguishing deteriorates in discharging foam liquid. I devise a method to improve it that the metering orifice type in-line eductor is improved into the metering venturi type in-line eductor, the fluctuation of the mixture ratio to the flux change of the pressurized water is minimized and the performance of fire-extinguishing is kept regularly. As this method is simple in its structure and can be designed at a low cost, it helps for maintenance as well. In the future, it seems to need the research for the metering nozzle type in-line eductor in the future.

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.77-84
• /
• 1996

Most species were occured at the low altitude in June and at the high altitude in August. And then, in September, they occurred abundantly at the low sites as the same case in June. The trends in population density of 4 species of Pterostichus from Mt. T$\breve{o}$gyusan, S. Korea, were revealed various tendencies of fluctuation. Generally most species showed the seasonal prevelance in some extent of degree as their characteristic appearance.