• 상하수도학회지
• /
• 제23권6호
• /
• pp.833-842
• /
• 2009

A series of laboratory experiments has been performed to investigate the behaviour of interfacial layer of saltwater wedge in estuary. Experimental conditions have been established according to densimetric Froude number, which is a dimensionless number comparing inertia force with buoyancy due to the density difference. To observe the behaviour of saltwater wedge, conductivity meter has been used to detect salinity. Time averaged and temporal variation of observed properties have been analyzed to determine and investigate the interfacial layer. The location and profile of interfacial layers have shown the dependency on densimetric Froude number. The thickness of interfacial layer has been also dependent on the variation of densimetric Froude number.

• 한국분무공학회지
• /
• 제13권3호
• /
• pp.117-125
• /
• 2008

The correlations for the prediction of maximum liquid-phase penetration in diesel spray are reviewed in this study. The existing models developed for the prediction of maximum liquid-phase penetration can be categorized as the zero-dimensional (empirical) model, the multi-dimensional model and the other model. The existing zero-dimensional model can be classified into four groups and the existing multidimensional models can be classified into three groups. The other model includes holistic hydraulic and spray model. The maximum liquid-phase penetration is mainly affected by nozzle diameter, fuel volatility, injection pressure, ambient gas pressure, ambient gas density and fuel temperature. In the case of empirical correlations incorporated with spray angle, the predicted results will be different according to the selection of correlation for spray angle. The research for the effect of boiling point temperatures on maximum liquid-phase penetration is required. In the case of multidimensional model, there exist problems of the grid and spray sub-models dependency effects.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.703-706
• /
• 1998

This paper presents an efficient substrate-bias generator(SBG)for low-power, high-density DRAM's The proposed SBG can supply stable voltage with switching the supply voltage of driving circuit, and it can substitude the small capacitance for the large capacitance. The charge pumping circuit of the SBG suffere no VT loss and is to be applicable to low-voltage DRAM's. Also it can reduce the power consumption to make VBB because of it's high pumping efficiency. Using biasing voltage with positive temperature coefficient, VBB level detecting circuit can detect constant value of VBB against temperature variation. VBB level during VBB maintaining period varies 0.19% and the power dissipation during this period is 0.16mw. Charge pumping circuit can make VBB level up to -1.47V using VCC-1.5V, and do charge pumping operation one and half faster than the conventional ones. The temperature dependency of the VBB level detecting circuit is 0.34%. Therefore the proposed SBG is expected to supply a stable VBB with less power consumption when it is used in low power DRAM's.

• 신재생에너지
• /
• 제6권2호
• /
• pp.5-11
• /
• 2010

This paper reviews three commercial softwares for wind climate data analysis in wind resource assessment; WAsP/Observed Wind Climate, WindRose and Windographer. Windographer is evaluated as the best software because of its variety of input data format, analysis functions, easiness of user interface, etc. For a quantitative understanding of uncertainty depending on software selection, a benchmark is carried out with the met-mast observation dataset at the Gimnyeong Wind Turbine Performance Test Site. It is found that Weibull parameter calculation and air density correction have a dependency on the software so that such uncertainty should be considered when an analysis software is selected. It is confirmed that annual energy production calculated by WAsP using a statistical table of frequency of occurrence may have some error compared to a time-series calculation method used by the other softwares.

• 한국전산유체공학회지
• /
• 제7권4호
• /
• pp.1-7
• /
• 2002

The phase-change transformation processes are relevant in many engineering applications. In particular, this phenomenon plays an important role in the extraction and fabrication operations in the metallurgical industry. The control of the heat transfer and fluid flow patterns is important to achieve casting quality and competitive production times. In the present study, a simple finite-element algorithm is developed for solid-liquid phase change problems. Natural convection in the liquid phase due to the temperature dependency of water density is considered by a numerical model. The predictions are compared with measurements by the particle image velocimetry(PIV). to show that the calculation results are in good agreement with the experiment results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.348-352
• /
• 1995

In the conventional linear elasticity, ultrasonic velocity is determined by elastic modulus and density of te medium which ultrasonic wave propagates through. But, practical ultrsonic wave depends on the stress acting in the medium, and as the stress increases such dependency becomes nonlinear. This nonlinear dependencyof ultrasonic velocity on stress can be identified by using nonlinear elastic modulus up to 4th order. In thid paper, with the above background relationships between nonlinear elastic modulus and the internalstatus of materials, normal, plastic deformed or heat stressed, are discussed. For this purpose, a new type of measuring system extended from the general nondestructive UT(ultrasonic test) equipment is constructed.

• 한국농공학회지
• /
• 제40권6호
• /
• pp.95-103
• /
• 1998

Solutions of geotechnical engineering problems require calculation of deformation and stresses during various stages of loading. Powerful numerical methods are available to make such calculation even for complicated problems. To get accurate results, realistic stress-strain relationships of soil are dependent on a number of factors such as soil type, density, stress level and stress path. Attempts are continuously being made to develope analytical models for soils incorporating all such factors. The nature of stress-path dependency, the principle that governs deformations in sand, and the use of Lade's single work-hardening model for predicting sand response for a variety of stress-paths have been investigated and are examined. The test results and the analyses presented show that under some conditions sand exhibits stress-path dependent behavior. The strains calculated from Lade's single work-hardening model are in reasonable agreement with those measured, but some discrepancies occur. The largest difference between measured and calculated strains occurs for proportional loading with increasing stresses and for stress-path directions.

• 전자공학회논문지B
• /
• 제29B권10호
• /
• pp.78-89
• /
• 1992

In this paper, a multiresolution edge detction algorithm for speckle images is proposed. Due to the signal dependency of speckle images, the number of edge points detected depends on the local average intensity. Thus the edge detection method independent of the average intensity is required to detect properly real significant changes in an original signal. In the proposed method, candidate area is first selected based on the statistical propeties of speckle images,i.e., based on the busyness measure such as the CoV(coefficient of variation) and the difference between the real and theoretical CDF(cumulative density function). Then the real edges are extracted in a multiresolution environment. Computer simulation with test images shows that the proposed method reduces significantly false edges in relatively homogeneous areas while detects fine details properly.

• 한국포장학회지
• /
• 제9권1호
• /
• pp.19-24
• /
• 2003

We study on the phase diagram of the polymer blend. For this purpose, one PS (polystyrene) and two PI(polyisoprene) were employed whose molecular weights were low enough to make the experimental determinations possible. The weight-average molecular weight(Mw) of PS was 2514, and Mws of two PIs were 2700. Interaction energy density (IED) of the Flory-Huggins lattice theory was defined as a function of temperature and composition, and the consequent equations for the binodal, and critical points were derived. By fitting the experimental binodal points to the derived binodal curve with a nonlinear regression method, the expression for the IED was determined. And the expression for the IED obtained from this study was compared with those reported in the literatures. Also were discussed the importance of accuracy in the expression the IED, and the IED's dependency on the temperature, composition and molecular weights.

• Journal of Multimedia Information System
• /
• 제6권1호
• /
• pp.37-42
• /
• 2019

Skyline queries are used in a variety of fields to make optimal decisions. However, as the volume of data and the dimension of the data increase, the number of skyline points increases with the amount of time it takes to discover them. Mainly, because the number of skylines is essential in many real-life applications, various studies have been proposed. However, previous researches have used the k-parameter methods such as top-k and k-means to discover representative skyline points (RSPs) from entire skyline point set, resulting in high query response time and reduced representativeness due to k dependency. To solve this problem, we propose a new Connected Component Clustering based Representative Skyline Query (3CRS) that can discover RSP quickly even in high-dimensional data through connected component clustering. 3CRS performs fast discovery and clustering of skylines through hash indexes and connected components and selects RSPs from each cluster. This paper proves the superiority of the proposed method by comparing it with representative skyline queries using k-means and DBSCAN with the real-world dataset.