• Journal of Information Processing Systems
• /
• 제8권4호
• /
• pp.669-684
• /
• 2012

Discrete wavelet transforms are extensively preferred in biomedical signal processing for denoising, feature extraction, and compression. This paper presents a new denoising method based on the modeling of discrete wavelet coefficients of ECG in selected sub-bands with Kernel density estimation. The modeling provides a statistical distribution of information and noise. A Gaussian kernel with bounded support is used for modeling sub-band coefficients and thresholds and is estimated by placing a sliding window on a normalized cumulative density function. We evaluated this approach on offline noisy ECG records from the Cardiovascular Research Centre of the University of Glasgow and on records from the MIT-BIH Arrythmia database. Results show that our proposed technique has a more reliable physical basis and provides improvement in the Signal-to-Noise Ratio (SNR) and Percentage RMS Difference (PRD). The morphological information of ECG signals is found to be unaffected after employing denoising. This is quantified by calculating the mean square error between the feature vectors of original and denoised signal. MSE values are less than 0.05 for most of the cases.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.337-343
• /
• 2021

In this work, self-absorption correction factor related to the variation of the composition and the density of soil samples were evaluated using the p-type HPGe detector. The validated MCNP5 simulation model of this detector was used to evaluate its Full Energy Peak Efficiency (FEPE) under the variation of the composition and the density of the analysed samples. The results indicates that FEPE calculation of low gamma ray is affected by the composition and the density of soil samples. The self-absorption correction factors for different gamma-ray energies which was fitted as a function of FEPEs via density and energy and fitting parameters as polynomial function for the logarithm neper of gamma ray energy help to calculate quickly the detection efficiency of detector. Factor Analysis for the influence of the element composition in analysed samples on the FEPE indicates the FEPE distribution changes from non-metal to metal groups when the gamma ray energy increases from 92 keV to 238 keV. At energies above 238 keV, the FEPE primarily depends only on the metal elements and is significantly affected by aluminium and silicon composition in soil samples.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.1-10
• /
• 2012

We fabricated a closed coils by using resistive-joint method and the joint resistance of the coils were estimated by field decay technique in liquid nitrogen. We used the Runge-kutta method for the numerical analysis to calculate the decay properties. The closed coil was wound by $(Bi,Pb)_2Sr_2Ca_2Cu_3O_x$/Ag tape. Both ends the tape were overlapped and soldered to each other. The current was induced in a closed coils by external magnetic flux density. Its decay characteristic was observed by means of measuring the magnetic flux density generated by induced current at the center of the closed coil with hall sensor. The joint resistance was calculated as the ratio of the inductance of the loop to the time constants. The joint resistances were evaluated as a function of critical current of loop, contact length, sweep time, and external magnetic flux density in a contact length of 7 cm. It was observed that joint resistance was dependent on contact length of a closed coil, but independent of critical current, sweep time, and external magnetic flux density. The joint resistance was measured to be higher for a standard four-probe method, compared with that for the field decay technique. This implies that noise of measurement in a standard four-probe method is larger than that of field decay technique. It was estimated that joint resistance was $8.0{\times}10^{-9}{\Omega}$ to $11.4{\times}10^{-9}{\Omega}$ for coils of contact length for 7 cm. It was found that 40Pb/60Sn solder are unsuitable for persistent mode.

• 한국음향학회지
• /
• 제20권2호
• /
• pp.3-9
• /
• 2001

본 논문에서는 음성엔코더 (speech-waveform coder) 시뮬레이션에 사용할 수 있는 난수발생기를 설계하였다. 설계된 난수발생기는 규정된 확률밀도함수와 규정된 스펙트럼을 동시에 만족해야 하는 환경에서 필요로 하는 것이다. 선형필터와 메모리가 없는 비선형 회로로 구성되는 Sondhi 알고리즘 [1]을 기반으로 하여 난수발생기를 구현하였고, 균일 분포, 이진 분포, 감마 분포와 같은 연속적인 확률분포함수들을 얻기 위해 필요한 선형필터와 비선형 회로를 구현하는 방법을 연구하였다. 또한 분석적인 방법을 통하여 구현해야 하는 비선형 회로가 비대칭 형태로 표현되지 않는 경우 (카이-제곱 분포, lognormal 분포)와 수학식으로 표현할 수 없는 경우 (Student-t 분포, F 분포)에는 Sondhi 알고리즘이 동작하지 않음을 보였다.

• Smart Structures and Systems
• /
• 제9권6호
• /
• pp.473-487
• /
• 2012

GPS has become an established technique in structural health monitoring. This paper presents the application of an on-line GPS RTK system on the Zhujiang Huangpu Bridge (China) for monitoring bridge deck and towers movements. In this study, both the form and functions of movements of the deck and towers of the bridge under affecting loads were monitored in lateral, longitudinal and vertical directions. Such movements were described in time and frequency domains by determining the trend, torsion, periodical of the series using probability density function (PDF). The results of the time series GPS data are practical and useful to bridge health monitoring.

• Journal of Information Processing Systems
• /
• 제16권1호
• /
• pp.145-154
• /
• 2020

Maximum likelihood (ML) is the best estimator asymptotically as the number of training samples approaches infinity. This paper deduces an adaptive algorithm for blind signal processing problem based on gradient optimization criterion. A parametric density model is introduced through a parameterized generalized distribution family in ML framework. After specifying a limited number of parameters, the density of specific original signal can be approximated automatically by the constructed density function. Consequently, signal separation can be conducted without any prior information about the probability density of the desired original signal. Simulations on classical biomedical signals confirm the performance of the deduced technique.

• Transactions on Electrical and Electronic Materials
• /
• 제6권6호
• /
• pp.280-283
• /
• 2005

The moving photocarrier grating (MPG) technique for the determination of the carrier mobilities and the recombination lifetime of $\alpha$-Se:As films has been studied. The electron and hole drift mobility and the recombination lifetime of $\alpha$-Se films with arsenic (As) additions have been obtained from measurement of the short circuit current density $j_{sc}$ as a function of grating velocity and spatial period. The hole mobility decreases due to defect density of hole traps when x exceeds 0.003, whereas the hole mobility increases for the case of low As addition (x$\le$0.003). We have found an increase in hole drift mobility and recombination lifetime, especially when As with (x = 0.003) is added into the $\alpha$-Se film.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.246-249
• /
• 2009

Due to the additive white Gaussian noise (AWGN), images are often corrupted. In recent days, Bayesian estimation techniques to recover noisy images in the wavelet domain have been studied. The probability density function (PDF) of an image in wavelet domain can be described using highly-sharp head and long-tailed shapes. If a priori probability density function having the above properties would be applied well adaptively, better results could be obtained. There were some frequently proposed PDFs such as Gaussian, Laplace distributions, and so on. These functions model the wavelet coefficients satisfactorily and have its own of characteristics. In this paper, mixture distributions of Gaussian and Laplace distribution are proposed, which attempt to corporate these distributions' merits. Such mixture model will be used to remove the noise in images by adopting Maximum a Posteriori (MAP) estimation method. With respect to visual quality, numerical performance and computational complexity, the proposed technique gained better results.

• 대한토목학회논문집
• /
• 제10권4호
• /
• pp.53-66
• /
• 1990

산악의 영향을 받는 지역에서 비정상성 평균을 사용하는 G.C.모델에 의하여 총강우량의 우량곡면을 구성하였다. 구성된 우량곡면에 2차원 프리에 해석을 실시하여 강우의 주기성분을 분리하였다. 강우의 지엽성분, 즉 강우잔차는 우량곡면에서 주기성분을 제거하여 얻은 강우잔차를 균일한 무작위장의 표본함수라고 가정해서 이 무작위장의 특성을 자기상관함수로 나타냈다. 자기상관함수를 변환하여 스팩트럼 밀도를 구했고, 이 결과를 토대로 한강, 금강유역의 환상스팩트럼 분포함수의 모델을 제안했다.

• Structural Engineering and Mechanics
• /
• 제36권5호
• /
• pp.561-573
• /
• 2010

The potential of the liquid column vibration absorber (LCVA) as a seismic vibration control device for structures has been explored in this paper. In this work, the structure has been modeled as a linear, viscously damped single-degree-of-freedom (SDOF) system. The governing differential equations of motion for the damper liquid and for the coupled structure-LCVA system have been derived from dynamic equilibrium. The nonlinear orifice damping in the LCVA has been linearized by a stochastic equivalent linearization technique. A transfer function formulation for the structure-LCVA system has been presented. The design parameters of the LCVA have been identified and by applying the transfer function formulation the optimum combination of these parameters has been determined to obtain the most efficient control performance of the LCVA in terms of the reduction in the root-mean-square (r.m.s.) displacement response of the structure. The study has been carried out for an example structure subjected to base input characterized by a white noise power spectral density function (PSDF). The sensitivity of the performance of the LCVA to the coefficient of head loss and to the tuning ratio have also been examined and compared with that of the liquid column damper (LCD). Finally, a simulation study has been carried out with a recorded accelerogram, to demonstrate the effectiveness of the LCVA.