• Archives of Plastic Surgery
• /
• v.35 no.6
• /
• pp.631-636
• /
• 2008

Purpose: Adipose tissue-derived stem cells(ADSC) has an osteoconductive potential and demineralized bone matrix(DBM) is an osteoinductive material. A combination of DBM and ADSC wound probably create osteoinductive properties. The purpose of this study is to determine the effect of the combination of DBM and ADSC mixture on healing of rat calvarial defect. Methods: Thirty adult male Sprague-Dawley rats were randomized into 3 groups(n=10) as 1) Control, 2) DBM alone, 3) DBM with ADSC mixture. DBM with ADSC mixture group has had a 3-day preculture of ADSC from groin fat pad. An 6 mm critical size circular calvarial defect was made in each rat. Defect was implanted with DBM alone or DBM with ADSC mixture. Control defect was left unfilled. 6 and 12 weeks after the implantation, the rats were sacrificed and the defects were evaluated by histomorphometric and radiographical studies. Results: Histomorphometric analysis revealed that DBM with ADSC mixture group showed significantly higher bone formation than DBM alone group(p<0.05). Although radiographs from DBM alone group and DBM with ADSC group revealed similar diffuse radiopaque spots dispersed throughout the defect. Densitometric analysis of calvarial defect revealed DBM with ADSC mixture group significantly higher bone formation than DBM alone(p<0.05). There was correlation of densitometry with new bone formation(Spearman's correlation of coefficient=0.804, 6 weeks, 0.802, 12 weeks). Conclusion: The DBM with ADSC mixture group showed the best healing response and the osteoinductive properties of DBM were accelerated with ADSC mixture. It will be clinically applicable that DBM and ADSC mixture in plastic and reconstructive surgery, such as alveolar cleft and congenital facial deformities that bone graft should be required.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3377-3381
• /
• 2014

Background: The incidence of colorectal cancer increases with vitamin D deficiency as shown in recently published studies. In addition, prospective investigations have indicated that low vitamin D levels may be associated with increased mortality of colorectal cancer, especially in stage III and IV cases. However, the exact incidence of vitamin D deficiency and the relation between vitamin D deficiency and osteopenia/osteporosis is still not known. The aim of this study is to identify severity of vitamin D deficiency and absolute risk factors of osteopenia/osteoporosis in colorectal cancer survivors. Materials and Methods: A total of 113 colorectal cancer survivors treated with surgery and/or chemotherapy ${\pm}$ radiotherapy were recruited from medical oncology outpatient clinics during routine follow-up visits in 2012-2013. Bone mineral densitometry (BMD) was performed, and serum 25-OH vitamin D levels were also checked on the same day of the questionnaire. The patients was divided into 2 groups, group A with normal BMD and group B with osteopenia/osteoporosis. Results: The median age of the study population was 58 (40-76). Thirty (30.0%) were female, whereas 79 (70.0%) were male. The median follow-up was 48 months (14-120 months). Vitamin D deficiency was found in 109 (96.5%); mild deficiency (20-30 ng/ml) in 19 (16.8%), moderate deficiency (10-20 ng/ml) in 54 (47.8%) and severe deficiency (<10 ng/ml) in 36 (31.9%). Osteopenia was evident in 58 (51.4%) patients whereas osteoporosis was noted in 17 (15.0%). Normal BMD was observed in 38 (33.6%). No apparent effects of type of surgery, presence of stoma, chemotherapy, radiotherapy and TNM stage were found regarding the risk of osteopenia and osteoporosis. Also, the severity of the vitamin D deficiency had no effect in the risk of osteopenia and osteporosis (p=0.93). In female patients, osteopenia/osteoporosis were observed in 79.5% patients as compared to 60.7% of male patients (p=0.04). Conclusions: In our study, vitamin D deficiency and osteopenia/osteoporosis was observed in 96.5% and 66.4% of colorectal cancer survivors, respectively. There is no defined absolute risk factor of osteopenia and osteoporosis in colorectal cancer survivors. To our knowledge, in the literature, our study is the first to evaluateall the risk factors of osteopenia and osteoporosis in colorectal cancer survivors.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.220-229
• /
• 2008

Purpose: The present study was aimed to examine the effect of acellular dermal matrix ($AlloDerm^{(R)}$) grafted to the experimental tissue defect on tissue regeneration. Materials and Methods: Male albino rabbits were used. Soft tissue defects were prepared in the external abdominal oblique muscle. The animals were then divided into 3 groups by the graft material used: no graft, autogenous dermis graft, and $AlloDerm^{(R)}$ graft. The healing sites were histologically examined at weeks 4 and 8 after the graft. In another series, critical sized defects with 8-mm diameter were prepared in the right and left iliac bones. The animals were then divided into 5 groups: no graft, grafted with autogenous iliac bone, $AlloDerm^{(R)}$ graft, $AlloDerm^{(R)}$ graft impregnated with rhBMP-2, and $AlloDerm^{(R)}$ graft with rhTGF-${\beta}1$. The healing sites of bone defect were investigated with radiologic densitometry and histological evaluation at weeks 4 and 8 after the graft. Results: In the soft tissue defect, normal healing was seen in the group of no graft. Inflammatory cells and foreign body reactions were observed in the group of autogenous dermis graft, and the migration of fibroblasts and the formation of vessels into the collagen fibers were observed in the group of $AlloDerm^{(R)}$ graft. In the bone defect, the site of bone defect was healed by fibrous tissues in the group of no graft. The marked radiopacity and good regeneration were seen in the group of autogenous bone graft. There remained the traces of $AlloDerm^{(R)}$ with no satisfactory results in the group of $AlloDerm^{(R)}$ graft. In the groups of the $AlloDerm^{(R)}$ graft with rhBMP-2 or rhTGF-${\beta}1$, there were numerous osteoblasts in the boundary of the adjacent bone which was closely approximated to the $AlloDerm^{(R)}$ with regeneration features. However, the fibrous capsule also remained as in the group of $AlloDerm^{(R)}$ graft, which separated the $AlloDerm^{(R)}$ and the adjacent bone. Conclusions: These results suggest that $AlloDerm^{(R)}$ can be useful to substitute the autogenous dermis in the soft tissue defect. However, it may not be useful as a bone graft material or a carrier, since the bone defect was not completely healed by the bony tissue, regardless of the presence of osteogenic factors like rhBMP-2 or rhTGF-${\beta}1$.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.439-448
• /
• 1993

The B-type gamma knife unit was installed at Kyung-Hee University Hospital in March 1992. The selective beam plugging method can be used to reduce the low percentage isodose profiles of normal sensitive organ and to modify the isodose curves of treatment volume for better shaping of the target volume. For representing the changes of the low percentage isodose profiles, the variations of dose distribution for several cases were discussed in this paper. The film dosimetry was peformed for the evaluation of calculated isodose profiles predicted by KULA dose planning system. The results were verified by RFA-3 automatic densitometry. The clinical application of selective beam shielding method was peformed in 17 patients in 100 patients who have undergone gamma knife radiosurgery for a year. The calculated and the measured isodose profiles for the high percentage regions were well consistent with each other. When the target of pituitary tumor is macro-size, the selective beam shielding method is the most applicable method. When the target size, however, is small, the correct selection of the proper helmet size is very important. All patients were exposed almost about 3~12 Gy for brain stem, and 3~11.2 Gy for optic apparatus. It is recommended that the same or other plugging patterns with multiple isocenters should be used for protection of the radiosensitive normal structures with precise treatment of CNS lesions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.117-123
• /
• 2008

The protein profiles of domestic potato cultivars were evaluated for total protein determination, amino acid composition, SDS-PAGE analysis and scanning densitometry. There were statistically significant differences in the levels of amino acids among potato cultivars. Total nitrogen amount was also significantly different among cultivars, ranging from 1.27 to 1.64%. SDS-PAGE analysis showed that there were significant differences in the content of major potato proteins such as papatin (40 kDa), trypsin inhibitor (20 kDa) and protease inhibitor (15 kDa) among cultivars (p<0.05). The amount of papatin among cultivars with a range of 22.16 to 25.81 mg/g d.w. was higher in Jopung, Shepody and Superior, whereas the amount of protease inhibitors including 15 kDa and 20 kDa was the highest in Jopung (37.0%). The Shepody contains the highest amount of papatin (25.8%) and the lowest of trypsin inhibitor (5.22%). Thus, it is suggested that Shepody is the most desirable cultivar for better nutrition based on the protein profile.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.354-361
• /
• 2002

The aim of this study is to develop and establish rapid, convenient, and accurate method of analyzing salivary IgA against S. mutans semi-quantitatively. Relative salivary IgA titer was calculated as maximum dilution fold of S. mutans protein that was not detected by salivary antibody after measuring relative intensity of the immune blot bands by densitometry. Analyses were performed in caries-experienced and non-experienced children. Mean IgA titer of non-experienced group shows higher level than that of caries-experienced without statistical significance due to high individual variety of antibody titer in non-experienced group: $2^{6.278{\pm}2.260}$ in non-experienced group and $2^{5.730{\pm}0.499}$ in caries-experienced group(p=0.464). Those results suggest that naturally induced salivary IgA antibodies against S. mutans were present in all subjects, but high titer of antibodies were not achieved in caries-experienced group. On the contrary, antibody titer in non-experienced group shows marked individual variations suggesting that antibody production is multifactorial. In conclusion, immune-slot blot method developed in this study would be useful and applicable in semi-quantitative analysis of antibodies.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.411-418
• /
• 2009

To evaluate the bone mineral density (BMD) and biochemical markers. We evaluated the BMD of femoral neck and lumbar spines of 998(male 568, female 430) persons who took a regular health screening in Woosuk University Hospital from September 2007 to March 2008 by dual energy bone mineral densitometry. Results of BMD are different in terms of biochemical markers. Especially aged people showed osteoporotic change progressively. Degree of osteoporosis increases with age. A steep decrease of BMD can be found in postmenopausal women who have low level of female hormone. More persistent effort is needed to find out the factors that can reduce BMD values for prevention of problems by osteoporosis. In essence, research on factors related to other biochemical markers must be studied continuously.

• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.35-39
• /
• 1998

We analyzed image factors to determine the characteristic factors that need for intelligent replenishment system of the auto film processor. We processed the serial 300 sheets of radiographic films of chest phantom without replenishment of developing and fixation replenisher. We took the digital data by using film digitizer which scaned the films and automatically summed up the pixel values of the films. We analyzed characteristic curves, average gradients and relative speeds of individual film using densitometer and step densitometry. We also evaluated the pH of developer, fixer, and washer fluid with digital pH meter. Fixer residual rate and washing effect were measured by densitometer using the reagent methods. There was no significant reduction of the digital density numbers of the serial films without replenishment of developer and fixer. The average gradients were gradually decreased by 0.02 and relative speeds were also gradually decreased by 6.96% relative to initial standard step-densitometric measurement. The pHs of developer and fixer were reflected the inactivation of each fluid. The fixer residual rates and washing effects after processing each 25 sheets of films were in the normal range. We suggest that the digital data are not reliable due to limitation of the hardware and software of the film digitizer. We conclude that average gradient and relative speed which mean the film's contrast and sensitivity respectively are reliable factors for determining the need for the replenishment of the auto film processor. We need more study of simpler equations and programming for more intelligent replenishment system of the auto film processor.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1776-1788
• /
• 2019

Objective: The demands for measures to improve disease resistance and productivity of livestock are increasing, as most countries prohibit the addition of antibiotics to feed. This study therefore aimed to uncover functional feed additives to help enhance livestock immunity and disease resistance, using Acanthopanax sessiliflorus fruit extract (ASF). Methods: ASF was extracted with 70% EtOH, and total polyphenolic and catechin contents were measured by the Folin-Ciocalteu and vanillin assay, respectively. The 3D4/31 porcine macrophage cells ($M{\Phi}$) were activated by phorbol 12-myristate 13-acetate (PMA), and cell survival and growth rate were measured with or without ASF treatment. Flow-cytometric analysis determined the lysosomal activity, reactive oxygen species levels (ROS), and cell cycle distribution. Nuclear factor kappa B ($NF-{\kappa}B$) and superoxide dismutase (SOD) protein expression levels were quantified by western blotting and densitometry analysis. Quantitative polymerase chain reaction was applied to measure the lipid metabolism-related genes expression level. Lastly, the antibacterial activity of 3D4/31 $M{\Phi}$ cells was evaluated by the colony forming unit assay. Results: ASF upregulated the cell viability and growth rate of 3D4/31 $M{\Phi}$, with or without PMA activation. Moreover, lysosomal activity and intracellular ROS levels were increased after ASF exposure. In addition, the antioxidant enzyme SOD2 expression levels were proportionately increased with ROS levels. Both ASF and PMA treatment resulted in upregulation of $NF-{\kappa}B$ protein, tumor necrosis factor $(TNF){\alpha}$ mRNA expression levels, lipid synthesis, and fatty acid oxidation metabolism. Interestingly, co-treatment of ASF with PMA resulted in recovery of $NF-{\kappa}B$, $TNF{\alpha}$, and lipid metabolism levels. Finally, ASF pretreatment enhanced the in vitro bactericidal activity of 3D4/31 $M{\Phi}$ against Escherichia coli. Conclusion: This study provides a novel insight into the regulation of $NF-{\kappa}B$ activity and lipid metabolism in $M{\Phi}$, and we anticipate that ASF has the potential to be effective as a feed additive to enhance livestock immunity.

• Journal of radiological science and technology
• /
• v.46 no.1
• /
• pp.1-8
• /
• 2023

As the demand for bone mineral density testing increases in Korea, which is close to an aging society, it is necessary to evaluate the repeatability of equipment such as femur phantom other than l-spine for more accurate diagnosis. However, in clinical practice, it is often not possible to proceed such evaluation due to insufficient quality control conditions. Therefore, this study is to evaluate the usefulness of the femur phantom after fabricating the same using 3D printing technology. The femur phantom was output using GlowFill filament and FDM 3D printing type. Each phantom was repeatedly scaned 20 times to compare whether the existing l-spine phantom and the fabricated femur phantom were suitable as a phantom for quality control. Each time the seven researchers took three times, the location of the femur phantom was readjusted, and then scanned to confirm the error between the researchers. As a result of conducting repeatability evaluation using femur phantom, the coefficient of variation rate was 2%, which was within the minimum precision tolerance of 2.5%. The reproducibility between the researcher was also found to be suitable as the average coefficient of variation was 0.031 and the coefficient of variation rate was 3.1%, which was within the minimum precision error range of 5%. In conclusion, it is considered that the prospective attitude and usefulness of the femur phantom fabricated by 3D printing in clinical practice will be sufficient.