• 한국표면공학회지
• /
• 제30권1호
• /
• pp.33-43
• /
• 1997

The effects of process parameters substrate such as substrate current and substrate temperature on the corrosion resistance of ion plated TiN film were investigated. TiN fims were deposited on speed steel on which Ti or Ni hed been previously evaporated. Dense TiN films could be obtained under higher substrate current(1A) and substrate temperature($500^{\circ}C$), whereas TiN films deposited with lower substances current(0.5A) and substrate temperature($300^{\circ}C$) showed porous structure. The corrosion resistances of high speed steel was considerably increased when dense TiN films had been formed on it. The effect of Ti and Ni interlayer on the increase of the corrosion resistance was also significant with dense TiN films, while there was little effect of interlayer on the corrosion resistance when TiN films were porous. the effect of interlayer on the corrosion resistance was more outstanding with Ti then with Ni, because Ti reacts more easily with oxygen to form an oxide layer, and it also shows higher resistance against chlorine containing corrosion media.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.702-707
• /
• 2013

High-quality ${\beta}$-silicon carbide (SiC) coatings are expected to prevent the oxidation degradation of carbon fibers in carbon fiber/silicon carbide (C/SiC) composites at high temperature. Uniform and dense ${\beta}$-SiC coatings were deposited on carbon fibers by low-pressure chemical vapor deposition (LP-CVD) using silane ($SiH_4$) and acetylene ($C_2H_2$) as source gases which were carried by hydrogen gas. SiC coating layers with nanometer scale microstructures were obtained by optimization of the processing parameters considering deposition mechanisms. The thickness and morphology of ${\beta}$-SiC coatings can be controlled by adjustment of the amount of source gas flow, the mean velocity of the gas flow, and deposition time. XRD and FE-SEM analyses showed that dense and crack-free ${\beta}$-SiC coating layers are crystallized in ${\beta}$-SiC structure with a thickness of around 2 micrometers depending on the processing parameters. The fine and dense microstructures with micrometer level thickness of the SiC coating layers are anticipated to effectively protect carbon fibers against the oxidation at high-temperatures.

• 충청수학회지
• /
• 제6권1호
• /
• pp.139-155
• /
• 1993

A new sequential algorithm and computational results for large-scale linear programs with a special structure were presented in the previous paper [9]. In this paper, a parallel version of the algorithm was developed for a hypercube multiprocessor architecture NCUBE2. Computational results using 128 processors are presented for a randomly generated large-scale sparse or dense problems with the number of variables up to 256 and constraints up to 5 million.

• 한국의류산업학회지
• /
• 제10권3호
• /
• pp.385-388
• /
• 2008

Four kinds of PET fabrics were coated with Copper and Nickel by electroless chemical plating, and the electromagnetic wave shielding effectiveness for those samples have been examined. The shielding effectiveness showed between 90 dB and 70 dB, and it related to the fabric structure, such as cover factor and cloth density. The dense fabric structure showed the better shielding effect.

• 한국전자현미경학회:학술대회논문집
• /
• 한국현미경학회 1999년도 제30차 춘계학술대회
• /
• pp.23-24
• /
• 1999

• Kyungpook Mathematical Journal
• /
• 제55권1호
• /
• pp.181-189
• /
• 2015

In this paper, we study Baire property of a family of spaces which contains properly the family of all topological spaces and generalize the existing results. Also, we study the images and inverse images of such spaces.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.327-332
• /
• 1996

Tungsten(W) polycide gate 구조에서 $WSi_x$의 두께가 증가하면 열처리 공정 후 Gate oxide의 두께가 증가하며, 전기적 신뢰도가 열화 되는 현상이 발생한다. 이러한 특성 열화를 일으키는 지배적인 요인은 $WSi_x$ 증착 공정 중 유입되어 후속 열 공정에 의하여 gate oxide로 환산되는 fluorine인 것으로 밝혀졌다. 이러한 현상을 규명하기 위하여 fluorine ion implantation된 poly Si과의 특성을 비교하였으며, SIMS 및 단면 TEM을 이용한 미세 구조 연구를 실시하였다. 그러나 $WSi_x$의 두께가 600$\AA$ 이상부터는이러한 특성 열화가 포화되는 현상이 관찰되었다. 600$\AA$ 이상의 $WSi_x$ 두께에서는 미세 구조가 표면이 거칠고, porous한 phase로 구성된 상부 구조와 비교적 dense하고, 매끈한 계면 상태를 갖는 하부 구조로 이루어졌으며, porous한 표면 부위는 후속 열공정 중 oxygen-rich한 phase로 변하여 fluorine을 포획하여 oxide로의 확산을 억제하여 특성 열화가 포화되는 것으로 해석되었다.

• 공업화학
• /
• 제10권4호
• /
• pp.515-522
• /
• 1999

상분리 방법으로 비대칭 폴리에테르이미드막을 제조하였고, 수산화나트륨 수용액으로 막의 표면층을 개질 했을 때의 몰폴로지 변화를 반응기간과 반응용액 농도에 대하여 살려보았다. 표면층 몰폴로지는 개질 용액의 농도가 증가함에 따라 치밀한 구조에서 둥근 입자상의 형태로 변화되었고, 개질 시간이 증가될수록 치밀 영역이 증가되었다. 그러나 반응 농도가 아주 높거나 장시간 개질을 하면 비대칭 폴리에테르이미드막의 표면에서 치밀 구조층이 없어지는 결과를 나타냈다. 결과적으로, 표면의 몰폴로지는 개질 용액의 농도와 시간에 따라 크게 좌우됨을 알 수 있었다. 이러한 결과는 폴리에테르이미드가 수산화나트륨에 의해서 폴리아믹산으로 가수분해되면서 나타나는 현상으로 추측되었다.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1571-1577
• /
• 2013

Electrical tree structure is one of the most important influencing factors for electrical treeing characteristics in polymers. In this paper, we focused on the structure characteristics of electrical treeing in epoxy resins (original) insulation under different high-frequency voltages (60, 500, 1000Hz). Effects of voltage frequency on the ac electrical treeing phenomena in an epoxy resins were carried out in needle-plate electrode arrangement. To measure the treeing initiation and propagation, and the breakdown rate, constant AC of 10 kV with three different voltage frequencies (60, 500 and 1,000 Hz) was applied to the specimen in needle-plate electrode specimen at $30^{\circ}C$ of insulating oil bath. At 60 Hz, the treeing initiation time was 360 min and the propagation rate was $6.85{\times}10^{-4}mm/min$, and the morphology was dense branch type. As the voltage frequency increased, the treeing initiation time decreased and the propagation rate increased. At 1,000 Hz, the treeing initiation time was 0 min and the propagation rate was $7.81{\times}10^{-2}mm/min$, and the morphology was dense bush type.

• Applied Microscopy
• /
• 제8권1호
• /
• pp.67-76
• /
• 1978

A comparative investigation of fine structure of callus cells derived from tissue culture of Panax ginseng was made by electron microscope. Callus was consisted of large superficial cells and small inner zone cells derived from shoot apex tissue cultured for 16 weeks. Large superficial cells were contained the clusters of starch grains surrounded by a double plastid membrane. Especially, electron dense particles were deposited just inside and outside of plastid membrane and also deposited on mitochondria-like and endoplasmic reticulum-like structures. Crystalline body was also found in superficial cells. Small inner zone cells were characterized by presence of proplastids sheathed by short endoplasmic reticulum profiles. presence of spiral configuration of ribosomes and absence of crystalline body. Organ primordia was consisted of a dense cytoplasm and notable nucleate cells derived from nodal tissue cultured for 67 weeks. Proplastids containing starch grains and crystalline bodies were frequently observed; starch grains are of small quantity and does not form the clusters as in inner zone cells; hexagonal crystalline body itself does not have always limiting membrane. Remarkably. in a few cells of primordia, particles resembling the presumptive virus were observed mainly in condensed nuclear chromatin and also in cytoplasm, in mitochondrion-like organelle.