• Title/Summary/Keyword: Dense materials

검색결과 831건 처리시간 0.028초

시멘트계 재료의 탄소포집 건설재료로 활용연구 - 탄산화 양생에 의한 미세구조 변화 (A Study on the Cementitious Materials as Carbon Capture Materials-Micro-Structure Change by Carbonation Curing)

  • 문은진;김상준;박홍기;최영철
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제22권6호
    • /
    • pp.123-129
    • /
    • 2018
  • 최근 산업 활동에 의해 발생하는 $CO_2$에 대한 처리와 산업부산물에 대한 유효처리 및 자원화 방안이 시급히 요구되고 있다. 본 연구는 콘크리트 혼합재료로 활용이 가능한 산업부산물를 대상으로 탄산화 양생에 의한 건설재료로의 적용성 평가를 목적으로 한다. 이러한 목적을 위해 연구용 시멘트(research cement, RC), 고로슬래그 미분말(GGBFS) 및 유동층 보일러 애시(CFBC)를 대상으로 탄산화 양생에 의한 물리 화학적 변화를 비교 검토하였다. 페이스트 내부의 미세조직 변화를 살펴보기 위해 XRD, SEM 분석을 수행하였다. 실험결과 탄산화 양생을 통해 생성된 반응 생성물인 탄산칼슘은 페이스트 내부의 공간을 채우며 밀도가 높은 미세 구조를 형성함을 확인하였다. 또한, $CO_2$ 양생시간이 길어짐에 따라 탄산칼슘 결정이 함께 성장하여 밀실한 미세구조를 이루는 것을 확인하였다.

용융염 LiCl 및 LiCl-$Li_2O$에서 내열합금 More 1과 Super 22H의 부식거동 (Corrosion Behavior of Heat-Resistant Alloys of More 1 and Super 22H in Molten Salt of LiCl and LiCl-$Li_2O$)

  • 조수행;박상철;장준선;신영준;박현수
    • 한국재료학회지
    • /
    • 제9권6호
    • /
    • pp.556-563
    • /
    • 1999
  • The corrosion behavior of heat-resistant alloys, More 1 and Super 22H in molten salts of LiCl and $LiCl-Li_2$O was investigated in the temperature range of $650~850^{\circ}C$. In a molten salt of LiCl, a dense protective oxide scale of $LiCrO_2$ was formed, following growth of oxide scale with parabolic kinetics. But in a mixed molten salt of LiCl, a dense protective oxide scale of $LiCrO_2$ was formed, following growth of oxide scale with parabolic kinetics. But in a mixed molten salt of $LiCl-Li_2$O, a porous non-protective scale of Li\ulcorner(Cr, Ni, Fe)\ulcornerO$_2$was formed, following growth of oxide scale with linear kinetics. The corrosion rate increased slowly with the increase of temperature up to $750^{\circ}C$, but above $750^{\circ}C$ rapid increase in corrosion rate observed. The corrosion behavior of Super 22H alloy was similar to that of More 1 alloy, but Super 22H showed higher corrosion resistance than More 1.

  • PDF

고주파유도 가열에 의한 나노구조의 TiAl 급속소결과 합성 및 기계적 성질 (Rapid Sintering and Synthesis of TiAl by High-Frequency Induction Heating and its Mechanical properties)

  • 김나리;나권일;김원백;조성욱;손인진
    • 대한금속재료학회지
    • /
    • 제48권11호
    • /
    • pp.989-994
    • /
    • 2010
  • A nanopowder of TiAl was synthesized by high energy ball milling. Dense nanostuctured TiAl was consolidated using a high frequency induction heated sintering method within 2 minutes from mechanically synthesized powders of TiAl and horizontally milled powders of Ti+Al. Properties of the TiAl obtained using the two methods were compared. The grain size and hardness of TiAl sintered from horizontally milled Ti+Al powders and high energy ball milled TiAl powder were 40 nm, 20 nm, and $630kg/mm^2$, $700kg/mm^2$, respectively.

펄스전류활성 가열에 의한 나노구조의 TiCu 급속소결과 기계적 성질 (Rapid Sintering of TiCu by Pulsed Current Activated Heating and its Mechanical Properties)

  • 두송이;김나리;김원백;조성욱;손인진
    • 대한금속재료학회지
    • /
    • 제48권10호
    • /
    • pp.922-928
    • /
    • 2010
  • Nanopowder of TiCu was synthesized by high-energy ball milling. A dense nanostructured TiCu was consolidated using a pulsed-current activated sintering method within 1 minute from mechanically synthesized powders of TiCu and horizontally milled powders of Ti+Cu. The grain size and hardness of the TiCu sintered from horizontally milled Ti+Cu powders and high-energy ball-milled TiCu powder were 68 nm, 27 nm and $490kg/mm^2$, $600kg/mm^2$, respectively.

복합 적층판의 딥러닝 기반 파괴 모드 결정 (Deep Learning-based Fracture Mode Determination in Composite Laminates)

  • 무하마드 무자밀 아자드;아타 우르 레만 샤;M.N. 프라브하카르;김흥수
    • 한국전산구조공학회논문집
    • /
    • 제37권4호
    • /
    • pp.225-232
    • /
    • 2024
  • 본 논문에서는 딥러닝을 활용하여 복합재 적층판의 파괴 모드를 결정하는 방법을 제안하였다. 수많은 엔지니어링 응용 분야에서 적층 복합재의 사용이 증가함에 따라 무결성과 성능을 보장하는 것이 중요해졌다. 그러나 재료의 이방성으로 인해 복잡하게 나타나는 파괴모드를 식별하는 것은 도메인 지식이 필요하고, 시간이 많이 드는 작업이다. 따라서 이러한 문제를 해결하기 위해 본 연구에서는 인공 지능(AI) 기술을 활용하여 적층 복합재의 파괴 모드 분석을 자동화하는 것을 목표로 하였다. 이 목표를 달성하기 위해 적층된 복합재에서 파손된 인장 시험편의 주사 전자 현미경(SEM) 이미지를 얻어 다양한 파괴 모드를 확보하였다. 이러한 SEM 이미지는 섬유 파손, 섬유 풀아웃, 혼합 모드 파괴, 매트릭스 취성 파손 및 매트릭스 연성 파손과 같은 다양한 파손 모드를 기준으로 분류하였다. 다음으로 모든 클래스의 집합 데이터를 학습, 테스트, 검증 데이터 세트로 구분하였다. 두 가지 딥 러닝 기반 사전 훈련 모델인 DenseNet과 GoogleNet을 이용해 각 파괴 모드에 대한 차별적 특징을 학습하도록 훈련하였다. DenseNet 및 GoogleNet 모델은 각각 (94.01% 및 75.49%) 및 (84.55% 및 54.48%)의 훈련 및 테스트 정확도를 보여주었다. 그런 다음 훈련된 딥 러닝 모델은 검증 데이터 세트를 활용해 검증하였다. 더 깊은 아키텍처로 인해 DenseNet 모델이 고품질 특징을 추출하여 84.44% 검증 정확도(GoogleNet 모델보다 36.84% 더 높음)를 얻을 수 있음을 확인하였다. 이는 DenseNet 모델이 높은 정밀도로 파괴 모드를 예측함으로써 적층 복합재의 파손 분석을 수행하는 데 효과적이라는 것을 알 수 있다.

Selective Radiotherapy after Distant Metastasis of Nasopharyngeal Carcinoma Treated with Dose-Dense Cisplatin plus Fluorouracil

  • Liang, Yong;Bu, Jun-Guo;Cheng, Jin-ling;Gao, Wei-Wei;Xu, Yao-Can;Feng, Jian;Chen, Bo-Yu;Liang, Wei-Chao;Chen, Ke-Quan
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제16권14호
    • /
    • pp.6011-6017
    • /
    • 2015
  • Purpose: To investigate the efficacy and safety of selective radiotherapy after distant metastasis of nasopharyngeal carcinoma (NPC) treated with dose-dense cisplatin plus fluorouracil. Materials and Methods: Eligible patients were randomly assigned to a study group treated with dose-dense cisplatin plus fluorouracil following selective radiotherapy and a control group receiving traditional cisplatin plus fluorouracil following selective radiotherapy according to a 1:1 distribution using a digital random table method. The primary endpoint was overall survival (OS). Secondary endpoints were progression-free survival (PFS), objective response rate, relapse or progression rate in the radiation field and treatment toxicity. Results: Of 52 patients in the study group, 20 cases underwent radiotherapy., while in the control group of 51 patients, 16 underwent radiotherapy. The median PFS, median OS, survival rates in 1, 2 and 3 years in study and control group were 20.9 vs 12.7months, 28.3 vs 18.8months, 85.2%vs 65.9%, 62.2% vs 18.3%, and 36.6%vs 5.2% (p values of 0.00, 0.00, 0.04, 0.00 and 0.00, respectively). Subgroup analysis showed that the median OS and survival rates of 1, 2, 3 years for patients undergoing radiotherapy in the study group better than that in control group( 43.2vs24.1 months, 94.1% vs 86.7%, 82.4% vs 43.3%, 64.7% vs 17.3%, (p=0.00, 0.57, 0.04 and 0.01, respectively). The complete response rate, objective response rate after chemotherapy and three months after radiotherapy, relapse or progression rate in radiation field in study group and in control group were 19.2% vs 3.9%, 86.5% vs 56.9%, 85% vs 50%, 95% vs 81.3% and 41.3% vs 66.7% (p =0.03, 0.00, 0.03,0.30, 0.01 respectively). The grade 3-4 acute adverse reactions in the study group were significantly higher than in the control group (53.8% vs 9.8%, p=0.00). Conclusions: The survival of patients benefits from selective radiotherapy after distant metastasis of NPC treated with dose-dense cisplatin plus fluorouracil.

Formation of Ti-0 Biomedical Film on Ti6A14V Alloy by DC Glow Plasma Oxidizing

  • Zheng, C.L.;Cui, F.Z.;Xu, Z.
    • Journal of Korean Vacuum Science & Technology
    • /
    • 제6권1호
    • /
    • pp.16-21
    • /
    • 2002
  • Ti-0 film is a kind of biocompatible surface materials. In this paper, a new method, glow discharge plasma oxidizing, has been used in synthesizing Ti-O gradient films on Ti6A14V substrates. The effects of ion bombardment and process parameters on the structures of titanium oxide layers have been investigated. The results demonstrate that DC glow plasma oxidizing is more efficient in preparation of dense, hard, and high adhesive Ti-O biomedical films on titanium and its alloys. Samples treated by this method show higher hardness values than by others. Especially, in the condition of hollow cathode discharge, the ion bombardment enhances ionization of oxygen, promotes the oxygen permeation and facilitates the formation of the oxide of low valence states of titanium.

  • PDF

Mechanical Properties of Carbon/Carbon Composites Densified by HIP Technique

  • Manocha, L.M.;Warrier, Ashish;Manocha, S.;Banerji, S.;Sathiyamoorthy, D.
    • Carbon letters
    • /
    • 제6권1호
    • /
    • pp.6-14
    • /
    • 2005
  • The study of mechanical properties and fracture behaviour of carbon/carbon composites is significant to its application and development. These are dependent on microstructure and properties of reinforcing fibers and matrix, fiber/matrix interface and porosity/cracks present in the composites. In the present studies high-density carbon/carbon composites have been prepared using PAN and various pitch based carbon fibers as reinforcements and pitch as matrix with repeated densification cycles using high-pressure impregnation and carbonization technique. Scanning electron microscopy has been used to study the fracture behaviour of the highly dense composites and correlated with structure of the composites. The geometry of reinforcement and presence of unfilled voids/cracks was found to influence the path of crack propagation and thereby the strength of composites. The type of stresses (tensile or compressive) accumulated also plays an important role in fracture of composites.

  • PDF

배·급수계통에서 유리염소와 클로라민의 소독효과에 관한 비교연구 (Comparative Study on Disinfection Efficiency of Chlorine and Chloramine in the Distribution Systems)

  • 최용일;남상호
    • 상하수도학회지
    • /
    • 제13권2호
    • /
    • pp.82-88
    • /
    • 1999
  • This study was to evaluate disinfection efficiency of chlorine and chloramine as secondary disinfectants in the distribution systems. Indicator organism, HPC in the suspended and attached were measured for copper, galvanized steel, PVC, and carbon steel pipes. For suspended microorganism, the PVC pipe was markedly dense among the assessed pipe materials. The attached microorganism was markedly equivalent roughness of pipe materials. In copper and galvanized pipes, chloramine was more effective that free chlorine to disinfect suspended microorganism in the contact time of 2 hours. The contact time for the 99% inactivation of suspended microorganism by chloramine was longer than that of free chlorine. Regardless of pipe materials, chloramine was effective on both disinfection efficiency and 99% inactivation time for attached microorganism. In conclusion, chloramine which is good disinfectant for long contact time was recommended as secondary disinfectant in distribution system.

  • PDF

X-선 회절법에 의한 철-질소 화합물층의 ε과 γ'상 분율 해석 (Fraction Analysis of ε and γ'-iron Nitride in Compound Layer Using X-ray Diffraction)

  • 김윤기
    • 한국재료학회지
    • /
    • 제16권2호
    • /
    • pp.85-91
    • /
    • 2006
  • The fraction of $\varepsilon\;and\;\gamma$'-iron nitride in compound layer is predicted by x-ray diffraction using direct comparison method. The validity of formulation models was checked by comparing calculated results with metallographic analysis of iron nitride compound layer grown on steel S45C by gas nitriding. The fraction of $\varepsilon$ calculated by the three phase model, porous-$Fe_3N$/ dense-$Fe_3N$/ mixed layer with $Fe_3N\;and\;Fe_4N$, is 80 percent of that analyzed by etching technique. The $\varepsilon$ fraction predicted by mixed layer model is 122 percent of that measured by microscope.