• 제목/요약/키워드: Dense

검색결과 4,046건 처리시간 0.031초

기초의 근입깊이가 보상기초의 거동에 미치는 영향 (Effect of Embedment Depth of Footing on Behavior of Compensated Foundation)

  • 이승현;한진태
    • 한국산학기술학회논문지
    • /
    • 제16권2호
    • /
    • pp.1477-1482
    • /
    • 2015
  • 기초의 근입비가 보상기초의 극한지지력과 침하량에 미치는 영향을 살펴보고자 수치해석을 수행하였다. 수치해석에 의한 극한지지력비는 이론식에 의한 극한지지력비보다 컸으며 전체적으로 극한지지력비가 근입비에 비례하는 결과를 보였으나 정사각형기초에 대한 수치해석결과만 극한지지력비가 근입비에 따라 급격하게 증가하는 양상을 보였다. 모래지반에 놓인 띠기초의 경우 근입비에 따른 극한지지력비는 수치해석과 Meyerhof 방법에 의한 경우가 비슷하였으며 대체로 근입비의 제곱에 가까운 값을 나타내었으며 점토지반에 놓인 띠기초의 경우 이론식에 의할 경우 극한지지력비는 근입비의 영향을 크게 받지 않았고 수치해석결과에 따르면 근입비를 약간 상회하는 값들을 보였다. 수치해석결과에 따르면 근입비에 따른 정사각형기초의 극한지지력비가 띠기초의 그것에 비하여 크게 계산되었다. 수치해석결과를 통해 볼 때 전체적으로 근입비가 1인 경우 침하량비는 0.4 정도의 값을 보이다가 근입비가 커짐에 따라 침하량비가 감소하는 양상을 보였으며 느슨한 모래의 경우 상대적으로 침하량비가 가장 작았다.

폐 상안정 지르코니아 분말로 제조한 소결체의 물성 연구 (Property of Sintered Y2O3-stabilized Zirconia from Scrap Powders)

  • 송오성;박종성;남경주
    • 한국산학기술학회논문지
    • /
    • 제10권8호
    • /
    • pp.1783-1788
    • /
    • 2009
  • 스컬 공정으로 제조된 큐빅지르코니아에서 보석용으로 사용되는 부분 외에 일반적으로 버려지는 에지부 폐지르코니아를 분쇄하여 1550$^{circ}C$-2hr의 저온 소결 공정으로 소결한 소결체의 물성을 분석하여 재활용 가능성을 확인해보았다. 비교를 위한 새 지르코니아와 30 mol%-$Y_2O_3$ 혼합분말 (모두 1㎛ 길이의 셀룰러형)로 만든 소결체는 직경 $\sim$10㎛의 조밀 소결체가 결합된 형태를 보였으나, 1$\sim$30㎛의 크기 및 형태가 일정하지 않은 분말로 제조된 폐지르코니아 소결체는 $\sim$30㎛ 이상의 결정립을 가진 미세구조를 보였다. 새 지르코니아 혼합 분말로 만든 소결체는 cubic상인 $Y_2O_3$, $Z_{r0.8}O_{1.9}$와 monoclinic상인 $Z_rO_2$의 혼합상을 보였으나, 폐지르코니아 분말 소결체의 경우 tetragonal 단일상을 보임을 확인하였다. 폐지르코니아 소결체도 70 이상의 비커스 경도와 4.11 g/cc의 소결밀도를 보여서 구조재로 사용이 가능하였다.

2,2-Bis[4-(2-methoxy-3-methacryloyloxy propoxy) phenyl] propane을 함유한 상아질 접착레진의 물성이 접착강도에 미치는 영향 (The effect of the strength and wetting characteristics of Bis-GMA/TEGDMA-based adhesives on the bond strength to dentin)

  • 박은숙;김창근;배지현;조병훈
    • Restorative Dentistry and Endodontics
    • /
    • 제36권2호
    • /
    • pp.139-148
    • /
    • 2011
  • 연구목적: 치과용 접착제에서 기저단량체로 사용되는 Bis-GMA를 Bis-M-GMA로 대체한 접착레진이, Bis-GMA/TEGDMA 를 사용한 접착제와 비교할 만한 물성과 접착강도를 가지는지 알아보고자 하였다. 연구 재료 및 방법: 다양한 구성비의 Bis-GMA, Bis-M-GMA 및 TEGDMA 를 함유한 접착레진을 제작하여, 점도(${\eta}$), 중합률(DC) 및 굴곡강도(FS)를 측정하고, 상아질에 대한 미세인장접착강도(MTBS)를 측정하였다. 해석을 위해 각 단량체들의 용해도 상수(${\delta}_t$)를 비교하였고, 접착계면을 주사전자현미경으로 관찰하였다. 결과: Bis-M-GMA의 점도는 3.65 Pa s로 크게 감소하였다. Bis-GMA를 함유하지 않는 접착레진은 Bis-GMA를 함유한 접착레진에 비해 낮은 굴곡강도를 보였다(p < 0.05). TEGDMA 함량이 낮은 접착레진은 TEGDMA 함량이 높은 접착레진에 비해 낮은 미세인장접착강도를 보였으며(p < 0.05), 주사전자현미경 사진에서 균열이나 틈이 관찰되었다. 결론: 높은 접착강도를 얻기 위해서는 접착레진의 높은 굴곡강도와 초기 중합률 뿐 아니라, 접착레진과 primer 처리 된 상아질 사이의 용해도 상수의 적합성도 요구되었다.

적외선 센서용 [(Co1-xCux)0.2(Ni0.3Mn0.7)0.8]3O4 스피넬 박막의 구조 및 전기적 특성 (Structural and Electrical Properties of [(Co1-xCux)0.2(Ni0.3Mn0.7)0.8]3O4 Spinel Thin Films for Infrared Sensor Application)

  • 이귀웅;전창준;정영훈;윤지선;조정호;백종후;윤종원
    • 한국전기전자재료학회논문지
    • /
    • 제27권12호
    • /
    • pp.825-830
    • /
    • 2014
  • $[(Co_{1-x}Cu_x)_{0.2}(Ni_{0.3}Mn_{0.7})_{0.8}]_3O_4$ ($0{\leq}x{\leq}1$) thin films prepared by metal organic decomposition process were fabricated on SiN/Si substrate for infrared sensor application. Their structural and electrical properties were investigated with variation of Cu dopant. The $[(Co_{1-x}Cu_x)_{0.2}(Ni_{0.3}Mn_{0.7})_{0.8}]_3O_4$ (CCNMO) film annealed at $500^{\circ}C$ exhibited a dense microstructure and a homogeneous crystal structure with a cubic spinel phase. Their crystallinity was further enhanced with increasing doped Cu amount. The 120 nm-thick CCNMO (x=0.6) thin film had a low resistivity of $53{\Omega}{\cdot}cm$ at room temperature while the Co-free film (x=1) showed a significantly decreased resistivity of $5.9{\Omega}{\cdot}cm$. Furthermore, the negative temperature coefficient of resistance (NTCR) characteristics were lower than $-2%/^{\circ}C$ for all the specimens with $x{\geq}0.6$. These results imply that the CCNMO ($x{\geq}0.6$) thin films are a good candidate material for infrared sensor application.

용융코팅법에 의한 내플라즈마성 Y2O3-Al2O3-SiO2계 코팅 세라믹스 제조 (Fabrication of Plasma Resistant Y2O3-Al2O3-SiO2 Coating Ceramics by Melt-Coating Method)

  • 박의근;이현권
    • 한국재료학회지
    • /
    • 제30권7호
    • /
    • pp.359-368
    • /
    • 2020
  • This study is aimed at improving the plasma resistance of Al2O3 ceramics on which plasma resistant YAS(Y2O3-Al2O3-SiO2) frit is melt-coated using a simple heat-treatment process. For this purpose, the results of phase analysis and microstructural observations of the prepared YAS frits and the coating layers on the Al2O3 ceramics according to the batch compositions are compared and discussed with regard to the results of plasma resistance test. The prepared YAS frits consist of crystalline or amorphous or co-existing crystalline and amorphous phases according to the batch compositions, depending on the role and content of each raw material. The prepared YAS frit is melt-coated on the densely sintered Al2O3 ceramics, resulting in a dense coating layer with a thickness of at least ~ 80 ㎛. The YAS coating layer consists of crystalline YAG(Y3Al5O12), Y2Si2O7, and Al2O3 phases, and YAS glass phase. Plasma resistance of YAS coated Al2O3 ceramics is strongly dependent on the content of the YAG(Y3Al5O12) and Y2Si2O7 crystalline phases in the coating layer, especially on the content of the YAG phase. Comparing the weight loss of YAS coating ceramics with values obtained for commercial Y2O3, Al2O3, and quartz ceramics, the plasma resistance of the YAS coating ceramics is 6 times higher than that of quartz, 2 times higher than that of Al2O3, and 50 % of the resistance of Y2O3.

소성변형과의 상관성에 근거한 아스팔트 콘크리트의 변형강도 개발을 위한 기초연구 (A Fundamental Approach for Developing Deformation Strength Based on Rutting Characteristics of Asphalt Concrete)

  • 김광우;이문섭;김준은;최선주
    • 한국도로학회논문집
    • /
    • 제4권4호
    • /
    • pp.23-39
    • /
    • 2002
  • 본 논문은 아스팔트 포장의 소성변형 저항성 추정을 보다 쉽게 하기 위하여 새로운 시험법 및 장비를 개발하기 위한 연구이다. 본 연구에서는 다양한 종류의 아스팔트 혼합물을 사용하여 소성변형 저항성과의 상관성이 높게 나타나는 변형강도를 개발하기 위하여 하중봉의 직경(D) 3, 4cm, 각 봉의 하단을 다양하게 원형절삭(r)한 김 테스터를 개발하였다. 이를 이용하여 마샬시험과 같이 공시체를 $60^{\circ}C$에 수침처리하고 같은 속도의 정하중을 공시체에 다짐방향으로 가하여 최대하중 ($P_{max}$)과 이때의 수직 변위 (y)를 구하였다. 변형강도는 개발된 식 $K_D = 4P_{max}/{\pi}(D-2(r-\sqrt{2ry-y^2}))^2$으로 구하였으며 소성변형 특성치와 평균 $R^2$이 0.77이상의 높은 상관성을 보였다. 따라서 이 시험방법은 마샬안정도보다 훨씬 소성변형과의 상관관계가 큰 측정치를 얻을 수 있는 방법임을 알 수 있었으며, 특히 기존의 마샬시험기를 그대로 사용하고 공시체도 기존의 방법대로 제조 및 처리하도록 하여 적용이 빠를 것으로 판단된다. 향후 다양한 골재입도, 최대치수, r 등에서도 타당성과 상관성 검증을 통해 시험법을 표준화한다면 실용화 가능성이 매우 클 것이다.

  • PDF

식도이식에 관한 실험적 연구 (Patch Graft of the Canine Esophagus)

  • 하계식
    • Journal of Chest Surgery
    • /
    • 제2권2호
    • /
    • pp.167-167
    • /
    • 1969
  • Two groups of esophagus graft were done in canine esophagus in 34 adult mongrel dogs. For the first group segmental replacement graft was done with fresh autologous pericardium tube, and for the second, patch graft was done utilizing fresh autologous pericardium, fresh homologous pericardium,and dacron piece. All eight dogs in the first segmental replacement graft group died 2 to 5 days after operation with severe empyema caused by anastomosis disruption. Among 26 patch graft dogs 2 died during operation and 7 died 13 to 18 days after operation. For the 17 long-term patch grafted survivors esophagography and postoperative weight check were done. Postoperative stool was collected and examined for dacron patch excretion. One, two, three, and four months postoperative long-term survivors were sacrificed to obtain specimens in each group respectively and the following observations were made.I. Survival; Autologous pericardium patch group showed no mortality but in homologous pericardium and dacron patch group only two thirds were long-term survivors. II. Postoperative swallowing; There was no case which demonstrated postoperative dysphagia. About half of the cases showed postoperative weight increase and in only 3 cases weight decrease followed operation. III. Dacron patch was excreted in the stool 8 to 23 days after operation. Animals which excreted dacron patch up to 9 days after operation all died of empyema due to anastomosis disruption.IV. Postoperative esophagogram; All esophagograms in each group showed no leakage of barium, no passage disturbances and no remarkable stenotic signs.V. Morphological findings; [A] Macroscopical findings; In one month group specimens of each group dense adhesion with surrounding structures was noted and luminal surface was smooth with contraction of the patched area. In two month groups anastomosis sutures were still exposed but patched area showed lesser abnormality. In three to four months groups sutures were covered completely and patched area showed only very slight signs of contraction. [B] Microscopic findings; In one month group luminal surface of the replaced tissue [transplanted tissue] showed almost complete epithelial covering that is composed of several layers of squamous cells with no evidence of keratinization. Basement membrane was also well distinct throughout. Slight to minimal inflammatory cells comprising of large mononuclears, lymphocytes and plasma cells were observed in the subepithelial fibrous stroma consisted entirely of loose fibrous tissue containing many newly formed capillaries and fibroblastic proliferation. Scattered suture granulomas were found, few of which became acutely inflamed. In two months group repairing process progressed with lesser degree of inflammatory cell infiltration and young capillary proliferation. Fibrous tissue was more matured showing even focal collagenization.Suture granuloma persisted but with lesser reactive changes. Epithelial covering was that of a mature non-keratinizing stratified squamous epithelium. In three and four months groups the replaced area showed essentially similar histological findings. However, subepithelial stroma still consisted entirely of connective tissue without evidence of smooth muscle regeneration. In this group, inflammatory cell infiltration was minimal or negligible. Among these patch materials autologous pericardium group showed the most satisfactory repairing process.The above mentioned results may signify the feasibility of autogenous pericardium patch graft in clinical esophageal surgery.

식도이식에 관한 실험적 연구 (Patch Graft of the Canine Esophagus)

  • 하계식
    • Journal of Chest Surgery
    • /
    • 제2권2호
    • /
    • pp.168-186
    • /
    • 1969
  • Two groups of esophagus graft were done in canine esophagus in 34 adult mongrel dogs. For the first group segmental replacement graft was done with fresh autologous pericardium tube, and for the second, patch graft was done utilizing fresh autologous pericardium, fresh homologous pericardium,and dacron piece. All eight dogs in the first segmental replacement graft group died 2 to 5 days after operation with severe empyema caused by anastomosis disruption. Among 26 patch graft dogs 2 died during operation and 7 died 13 to 18 days after operation. For the 17 long-term patch grafted survivors esophagography and postoperative weight check were done. Postoperative stool was collected and examined for dacron patch excretion. One, two, three, and four months postoperative long-term survivors were sacrificed to obtain specimens in each group respectively and the following observations were made. I. Survival; Autologous pericardium patch group showed no mortality but in homologous pericardium and dacron patch group only two thirds were long-term survivors. II. Postoperative swallowing; There was no case which demonstrated postoperative dysphagia. About half of the cases showed postoperative weight increase and in only 3 cases weight decrease followed operation. III. Dacron patch was excreted in the stool 8 to 23 days after operation. Animals which excreted dacron patch up to 9 days after operation all died of empyema due to anastomosis disruption. IV. Postoperative esophagogram; All esophagograms in each group showed no leakage of barium, no passage disturbances and no remarkable stenotic signs. V. Morphological findings; [A] Macroscopical findings; In one month group specimens of each group dense adhesion with surrounding structures was noted and luminal surface was smooth with contraction of the patched area. In two month groups anastomosis sutures were still exposed but patched area showed lesser abnormality. In three to four months groups sutures were covered completely and patched area showed only very slight signs of contraction. [B] Microscopic findings; In one month group luminal surface of the replaced tissue [transplanted tissue] showed almost complete epithelial covering that is composed of several layers of squamous cells with no evidence of keratinization. Basement membrane was also well distinct throughout. Slight to minimal inflammatory cells comprising of large mononuclears, lymphocytes and plasma cells were observed in the subepithelial fibrous stroma consisted entirely of loose fibrous tissue containing many newly formed capillaries and fibroblastic proliferation. Scattered suture granulomas were found, few of which became acutely inflamed. In two months group repairing process progressed with lesser degree of inflammatory cell infiltration and young capillary proliferation. Fibrous tissue was more matured showing even focal collagenization. Suture granuloma persisted but with lesser reactive changes. Epithelial covering was that of a mature non-keratinizing stratified squamous epithelium. In three and four months groups the replaced area showed essentially similar histological findings. However, subepithelial stroma still consisted entirely of connective tissue without evidence of smooth muscle regeneration. In this group, inflammatory cell infiltration was minimal or negligible. Among these patch materials autologous pericardium group showed the most satisfactory repairing process. The above mentioned results may signify the feasibility of autogenous pericardium patch graft in clinical esophageal surgery.

  • PDF

SrCo0.8Fe0.1Nb0.1O3-δ 세라믹 분리막의 산소투과 특성 및 이산화탄소에 대한 내성 (Oxygen Permeability and Resistance to Carbon Dioxide of SrCo0.8Fe0.1Nb0.1O3-δ Ceramic Membrane)

  • 김은주;박세형;박정훈;백일현
    • 멤브레인
    • /
    • 제25권5호
    • /
    • pp.415-421
    • /
    • 2015
  • 고상반응법을 이용하여 $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ 조성의 산화물을 합성하였으며, 합성된 분말은 압축 성형 후 $1250^{\circ}C$에서 소결하여 치밀한 세라믹 분리막을 제조하였다. XRD 분석을 통해 단일상의 페롭스카이트 구조를 확인하였다. 산소 분압이 0.21 atm, 측정 온도가 $800{\sim}950^{\circ}C$인 조건하에서 산소투과를 분석한 결과 온도가 증가할수록 산소투과량은 증가하였고, $950^{\circ}C$에서 $1.839mL/min{\cdot}cm^2$로 최대값을 나타내었다. 니오븀(Nb)을 포함한 세라믹 분리막의 상안정성 및 이산화탄소 내성을 확인하기 위하여 $900^{\circ}C$에서 이산화탄소가 500 ppm이 포함된 혼합공기를 이용하여 장기투과 실험을 수행하였다. 이산화탄소에 노출된 $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$의 상안정성은 XRD와 TG로 분석하였다. 분석 결과, 이산화탄소에 노출된 $SrCo_{0.8}Fe_{0.1}Nb_{0.1}O_{3-{\delta}}$ 조성의 경우 약 8%의 $SrCO_3$가 생성되었으나, 이 수준의 $SrCO_3$ 생성량은 분리막의 산소투과도에 큰 영향을 주지 않는 것을 확인하였다.

MEA 수용액으로부터 PDMS-PE 복합막 접촉기를 이용한 이산화탄소 감압탈거 (Vacuum Stripping of $CO_2$ from Aqueous MEA Solutions Using PDMS-PE Composite Membrane Contactor)

  • 김정훈;안효성;김정훈
    • 멤브레인
    • /
    • 제22권1호
    • /
    • pp.46-53
    • /
    • 2012
  • 본 연구에서는 석탄 화력발전소의 연소 후 $CO_2$ 회수 기술인 알칸올 아민 수용액을 이용한 아민흡수법에서 전체 운전비의 80% 가량을 차지하는 탈거에너지의 저감을 위해 새로운 탈거기술인 분리막을 이용한 감압탈거 기술을 제시하고자 한다. 막의 소재로는 소수성막인 PE (polyethylene)를 지지체로 하고 $5{\mu}m$ 두께의 PDMS (polydimethylsiloxane)를 코팅한 복합막을 제조하여 적용하였으며, 흡수액으로 MEA (monoethanolamine) 30 wt% 수용액을 사용하였다. 온도의 변화에 따른 영향을 알아보기 위하여 흡수액 온도를 $25{\sim}80^{\circ}C$로 변화시켜 이산화탄소의 탈거특성을 살펴보았으며, 흡수용액의 $CO_2$ 함량($CO_2$ loading)에 따른 영향을 고찰하기 위하여 $CO_2$ 함량을 변화시켰다. 또한 감압탈거 시 탈거측 압력을 60~360 mmHg(abs.)로 변화시켜 진공도에 따른 탈거특성을 연구하였다. 아민수용액의 온도가 증가할수록, 이산화탄소 부하량이 증가할수록 이산화탄소의 탈거량은 증가하는 경향을 보이고 있으며, 감압이 감소함에 따라 이산화탄소의 탈거량 역시 증가하고 있는 것을 확인하였다. 막의 안정성 실험 결과 PTFE 단일막에 비하여 PDMS-PE 복합막의 경우 감압탈거 막공정에 적용하기 안정한 막이라고 판단된다.