• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2014

PURPOSES : The purpose of this study is to evaluate moisture susceptibility of a dense graded and an open graded asphalt mixtures by the method of AASHTO T-283. METHODS : To simulate moisture damage of asphalt pavements with continuously rainfall during summer rainy season, the dense graded and the open graded asphalt mixtures were immersed in water for 15 days and were measured the weight and the change of strength. Also, the mixtures were performed five freeze-thaw cycles to simulate moisture damage of the mixtures by freeze-thaw during winter and were measured the change of strength. The degradation characteristics model was used to analyze the relationship between strength and moisture damage. RESULTS : According to the results, the dense graded and the open graded asphalt mixtures were shown in the similar trends of the strength changes by immersion time and freeze-thaw cycle. However, the moisture damage reduction of open graded asphalt mixture was more sensitive in early phase than that of dense graded asphalt mixture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.355-360
• /
• 1992

The experiment was carried out to study the influence of planting densities and fertilizer application levels on some agronomic characters and yield of flower-head in Zingiber mioga ROSC. The results obtained are summarized as follows ; Plant hight was long in dense planting, and short in spacious planting. Stem diameter was thick in spacious planting, and was thin in dense planting. Flower-head weight per plant was decreased in dense planting and was increased in spacious planting. Yield was higher in dense planting densities (10$\times$20 : 50plants /m$^2$, 20$\times$20 : 25plant /m$^2$). Fertilizing (N : P$_2$O$_{5}$ : $K_2$O=15 : 15 : 15kg /10a) was increased than without fertilizing because plant height and number of stem was good.d.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.1032-1037
• /
• 2006

This thesis studied effects of the excavation around railroads on the deformation of the lateral ground and neighboring railroads. The conclusions of the study are as follows. 1. When the depth of excavationis 10m, the influential area should be 35m for soft clay, 20m for normal clay, 15m for hard clay, 15m for loose sand, 12m for slightly dense sand, and 8m for dense sand. 2. When the influential area is 10m, the allowable excavation depth should be 2.5m for soft clay, 4.8m for normal clay, 7.5m for hard clay, 7.2m for loose sand, 8.8m for slightly dense sand, and 10m for dense sand. 3. When the influential area is 20m, the allowable excavation depth should be 4.5m for soft clay, and up to 10m for the other five kinds of soil. 4. When the influential area is 30m, the allowable excavation depth should be 7.5m for soft clay, and up to 10m for the other five kinds of soil. 5. When the influential area is 35m, the allowable excavation depth should be up to 10m for all kinds of soil.

• Journal of The Korean Astronomical Society
• /
• v.53 no.3
• /
• pp.77-85
• /
• 2020

In the molecular cloud G33.92+0.11A, massive stars are forming sequentially in dense cores, probably due to interaction with accreted gas. Cold dense gas, which is likely the pristine gas of the cloud, is traced by DCN line and dust continuum emission. Clear chemical differences were observed in different source locations and for different velocity components in the same line of sight. Several distinct gas components coexist in the cloud: the pristine cold gas, the accreted dense gas, and warm turbulent gas, in addition to the star-forming dense clumps. Filaments of accreted gas occur in the northern part of the A1 and A5 clumps, and the velocity gradient along these features suggests that the gas is falling toward the cloud and may have triggered the most recent star formation. The large concentration of turbulent gas in the A2 clump seems to have formed mainly through disturbances from the outside.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.45.2-45.2
• /
• 2018

CS molecule is known to be adsorbed onto dust in cold dense cores, causing its significant depletion in the center region of cores. This study is aimed to investigate the depletion of CS molecule with optically thin $C^{34}S$ molecular line observations, including significance of its differentiation depending on the evolutionary status of the dense cores. We mapped five evolved starless cores, L1544, L1552, L1689B, L694-2 and L1197 using two molecular lines, $C^{34}S$ (J=2-1) and $N_2H^+$ (J=1-0) with NRO 45 m telescope. The $H^2$ column density and temperature structures of each targets were obtained by SED fitting for Herschel continuum images and the internal number density profiles by model fitting. All of the integrated intensity maps of $C^{34}S$ show depletion holes and 'semi-ring-like' distribution, indicating that the depletion of CS is clear and general. The radial profiles of CS abundance also show significant decrease towards the core center, while $N_2H^+$ abundance is almost constant or enhanced. We find that the more evolved cores with higher $H^2$ density tend to have a stronger depletion of CS. Our data strongly support claims that CS molecule generally depletes out in the central regions of starless dense cores and such chemical differentiation is closely related to their evolution.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.483-486
• /
• 2015

Security systems that use face recognition are vulnerable to spoofing attacks where unauthorized individuals use a photo or video of authorized users. In this work, we propose a method to detect a face spoofing attack with a video of an authorized person. The proposed method uses three sequential frames in the video to extract features by using Fourier Transform and Dense-SIFT filter. Then, classification is completed with a Support Vector Machine (SVM). Experimental results with a database of 200 valid and 200 spoof video clips showed 99% detection accuracy. The proposed method uses simplified features that require fewer memory and computational overhead while showing a high spoofing detection accuracy.

• Applied Microscopy
• /
• v.25 no.1
• /
• pp.30-47
• /
• 1995

The ultrastructural changes of adrenal chromaffin cells and ganglion cells in the adrenal gland of vacor-induced diabetic Mongolian gerbils were studied by electron microscopy. After one month of vacor-induced diabetes, some chromaffin cells were filled with dense bodies and large cytosomes with formy contents. Most of degenerating axon terminals were observed on chromaffin cells. A few macrophages were found among chromaffin cells at one month after induction. Several of these macrophages were filled with numerous phagosomes. After one month of vacor-induced diabetes, the ganglion cells showed increase in numbers of dense bodies and degenerating dendrites compared with the normal ganglion cells. Both electron dense and lucent types of degenerating axon terminals were found in interstitial space of the ganglion cells. Degenerating unmyelinated and myelinted axons contained dense and lamellar bodies. The satellite cells and macrophages with engulfed degenerated axon terminals were observed. After three months of vacor-induced diabetes, the unmyelinated and myelinated axons showed degenerative changes, whereas no structural changes could be demonstrated in adrenal ganglion and chromaffin cells. The satellite cells and macrophages containing partially digested debris were still commonly observed in the interstitial space of adrenal medulla. These results suggest that the degenerative changes occur in the adrenal ganglion cells as well as adrenal chromaffin cells of vacor-induced diabetic Mongolian gerbils.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.4
• /
• pp.398-407
• /
• 2013

Optical tomography was used to measure the pattern of spray cross-section. The maximum-likelihood estimation (MLE) algorithm was used to reconstruct the spray cross-section from the measured transmission rate of the spray. A swirl-type injector was used to form an optically dense spray, and the test was carried out in a high-pressure chamber, to control the pressure condition of the test site. Before the experiment, the reliability of the MLE-based reconstruction algorithm was verified, by comparing it with a conventional filtered back projection reconstruction (FBP) method. The MLE algorithm showed superior reconstruction of the image. In the spray patternation experiment, the results of the optical tomography and optical line patternator, which uses Mie scattering signal information, were compared. While measuring the cross-section of optically dense spray, the intensity of the scattering signal had attenuated to an uncorrectable level, which led to incorrect spray pattern measurement by the optical line patternator. However, reliable results were obtained by optical tomography, under the same condition. Finally, the pattern of the optically dense spray was measured at various chamber pressures, of up to 3 MPa. As the chamber pressure increased, the hollow cone-shaped swirl spray shrank, and the attenuation coefficient value of the inner region increased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.6-12
• /
• 2013

Aerosol deposition(AD) coating that enable fabricate films at low temperature have begun to be widely researched for the integration of ceramics as well to realize high-speed deposition rates. For application of ceramic thick film by AD to display and electronic ceramic industry, fabrication of dense structure with a no cracking is required. In this study, to fabricate dense ceramic thick film, the effect of crystal phase of starting powder was investigated. For this study, amorphous and crystalline $SiO_2$ powders were used as starting powders. Two types of $SiO_2$ powders were deposited on glass substrate by AD. In the case of amorphous $SiO_2$ powder, the deposited films had extremely incompact and opaque layer, irrespective of particle size. In contrast to amorphous powder, in the case of crystalline powder, porous structure layer and dense microstructure with no cracking layer were fabricated depending on the particle size. The optimized starting powder size for dense coating layer was $1{\sim}2{\mu}m$. The transmittance of film reached a maximum of 76% at 800 nm.

• Applied Microscopy
• /
• v.23 no.2
• /
• pp.107-123
• /
• 1993

The ultrastructural changes of the cardiac ganglion and granule-containing cells in the heart of vacor-induced diabetic Mongolian gerbils were studied by electron microscopy. After one month of vacor-induced diabetes the ganglion cells showed increase in numbers of dense bodies and mitochondria compared with the normal cardiac ganglion. Most of the satellite cells were filled with numerous phagosomes containing digested debris. Both electron-dense and lucent types of degenerating axon terminals were observed. The former was characterized by clusters of agranular vesicles and numerous mitochondria. The electron lucent type of degenerating axon terminal contained a few agranular vesicles and swollen mitochondria. Degenerating unmyelinated and myelinated axons contained large numbers of dense bodies, lamellar bodies, and mitochondria. Numerous macrophages containing phagosomes were reveled in the interstitial spaces. Some of the granule-containing cells in the heart showed a variety of degenerative changes and a decreased number of dense-cored vesicles. After three months of vacor-induced diabetes the unmyelinated and myelinated axons showed degenerative changes, whereas no structure changes could be demonstrated in intraatrial ganglion and granule containing cells. The satellite cells containing engulfed debris were observed in the cardiac ganglion cells. These results suggest that the degenerative changes occur in the cardiac ganglion cells of vacor-induced diabetic Mongolian gerbils as well as atrial granule-containing cells.