• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.2
• /
• pp.40-54
• /
• 2008

Small and large dams are installed in the course of a stream for maintaining the water level of the stream or obtaining agricultural water. Currently about 18,000 of them are installed in Korea to supply water. However, the environmental problems of small dams are well known : the interruption of stream eco-corridors, deterioration of water quality in the upper reaches of the small dam, changes in the habitats of riparian organisms, damages to the stream scenery. In a very few of these small dams artificial eco-corridors like fishways are installed, but the number is very minimal.Accordingly, to efficiently restore stream eco-corridors by removing these small dams, it will be necessary to closely examine physical impacts, such as changes in the riverbed and changes in the shape of the stream caused by the removal, chemical impacts, such as changes in water quality, and transport and accumulation of contaminated sediments and biological impacts, such as changes in the habitats of organisms, and develop related technologies in advance, and have these technologies verified through demonstration application in the sites. In this study, we analyzed the physical, chemical and ecological impacts of the removal of the above-mentioned small dams, and conducted a research on the demonstration small dam removal project for a spot investigation. As a result, the small dam removal will restore the eco-corridor, there by improving the habitat of fishes and crustaceans. The number of major underwater organisms inhabiting the Gokreungcheon, such as Korean spotted sleepers, Chinese minnows, Microphysogobio yaluensis, Abbottina rivularis, stone morokos, striped shinners, long-nosed barbels, and Chinese mitten crabs, is expected to increase, and the food chain in the ecosystem will improve so that species diversity will improve as well.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.4
• /
• pp.571-582
• /
• 1994

Three livestock/crop demonstration-cum-training farms have been established on plots of half, one and two acres, typical of the "Kandyan Forest Garden System" Vegetables, bananas, pepper, coffee, coconut and fruit trees are widely spaced, for intercropping with grass, and have been surrounded with live fences that also provide fodder for livestock to increase the family income. Each unit is operated by a selected employee and his family under a monthly incentive scheme based upon the gross margin. On these farms the technical parameters in dairying are better than elsewhere in the Mid-Country. Economic performance over 1985-1992 showed that dairying contributed most to the total gross margin of the half, one and two acre units, i.e. 31, 63 and 69%, respectively. Next came crops (29%, 37% and 19%), poultry (22%, 0% and 9%), and goats (18%, 0% and 3%). In the three farms the cash income per Sri Lankan Rupee spent was 1.5, 4.6 and 2.1, respectively. The overall ratio was 3.2 for dairying, 1.1 for poultry, 4.5 for goats and 9.9 for crops. Actual family labour in the three farms was 548, 548 and 639 days, compared to the 270, 330 and 440 days anticipated in the initial feasibility study. The average incentive payments, which were 20% (half acre), 61% (one acre) and 133% (two acres) of the parastatal salary of the employee, were only insufficient for the extra labour applied in the half acre unit. Dairying and goats proved to be attractive cash earners with a domestic fuel were important benefits. Poultry did little to improve farm income.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.2
• /
• pp.35-45
• /
• 2017

The types of installation of the photovoltaic system applied to domestic residential buildings are classified as follows: Mounted modules with air circulation, semi-integrated modules with air duct behind, integrated modules with fully insulated back. In order to study generation characteristics of PV system, we verified the validity of interpretation program based on long-term measurement data of demonstration house installed in BAPV form and also analyzed the generation characteristics and performance of each installation type. The results are as follows. First, the RMSE of amount of generation and simulation according to annual daily insolation of demonstration system located in Daejeon was 0.98kWh and the range of relative error of monthly power generation was -5.8 to 3.1. Second, the average annual PR of mounted modules was 82%, semi-integrated modules 76.1% and integrated modules 71.9%. This differences were attributed to temperature loss. Third, the range of operating temperature of annual hourly photovoltaic modules was -6.5 to $61.0^{\circ}C$ for mounted modules, $-6.0{\sim}73.9^{\circ}C$ for semi-integrated modules and -5.5 to $88.9^{\circ}C$ for integrated modules. The temperature loss of each installation type was -14.0 to 16.1%, -13.8 to 21.9%, and -13.6 to 28.5%, respectively.

• Health Policy and Management
• /
• v.24 no.4
• /
• pp.396-412
• /
• 2014

Background: As a reform plan of health care system, Accountable Care Organization (ACO) has became an object of attention in the United States after Patient Protection and Affordable Care Act was enacted. ACO is a group of various health care providers and provide coordinated care to its assigned beneficiaries. If ACOs improve the quality level and reduce the cost of care, they can get financial incentives. Under the discussion for a quite long time and demonstration projects, ACO has been established. We aimed to analysis and discuss the history, policy mechanism, contents, status and outcomes of ACO. Also, we intended to suggest political implication Korean health care system with regard to ACO. Methods: We searched the articles related ACO in PubMed and selected several available papers about ACO. Total 56 studies were reviewed and categorized three parts; demonstration projects for formation of ACO, policy mechanism and agenda, empirical results of ACO performance. Results: As a result, establishment of ACO was successful partly in the US. It seems to be due to various project and pilot test for verification in the long time. The empirical effect of ACO was also identified in a few study but it needs more evidences to judge its positive effect. Conclusion: In Korea, there are arguments for the application of ACO. However it is difficult to implement a ACO by different political conditions between Korean and US. Nevertheless ACO proposed us the necessity of paradigm shift in our health policy and could be significant to national policy orientation in the future.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.1
• /
• pp.38-44
• /
• 2003

Performance demonstration with real flawed specimens has been strongly required for nondestructive evaluation of safety class components in nuclear power plant. Mechanical or thermal fatigue crack and intergranular stress corrosion cracking could be occured in the in-service nuclear power plant and mechanical fatigue crack was selected to study in this paper. Specimen was designed to produce mechanical fatigue flaw under tensile stress. The number of cycles and the level of stress were controlled to obtain the desired flaw roughness. After the accurate physical measurement of the flaw size and location, fracture surface was seal-welded in place to ensure the designed location and site. The remaining weld groove was then filled by using gas-tungsten are welding(GTAW) and flux-cored arc welding(FCAW). Results of radio graphic and ultrasonic testing showed that fatigue cracks were consistent with the designed size and location in the final specimens.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.25-32
• /
• 2008

[ $^{169}Yb$ ] industrial NDT sealed sources were developed by using $Yb_2O_3$ pellets as the target and demonstrated for their performance. To produce the pellets, optimal compacting and sintering conditions were determined experimentally. Source holders for $^{169}Yb$ were designed and fabricated. After assembling an active source produced from HANARO with the developed source holder, a demonstration experiment was performed to compare the quality of the radiographs from $^{192}Ir$ and soft X-rays. This demonstration study showed that the developed $^{169}Yb$ produced better radiographs than $^{192}Ir$ for a carbon steel with less than a 4 mm thickness.

• Journal of the Korean Home Economics Association
• /
• v.43 no.8 s.210
• /
• pp.123-139
• /
• 2005

The Healthy Family Act was announced in February 2004 and has been in effect since January 2005. The purpose of this study was to determine some of the proper directions in the management of Healthy Family Centers based on the results of a six-month demonstration project. Family welfare services whose primary goal is to offer a system which support properly functining families and promoting their health, should be planned and provided from the perspective of the families involved, since they are the recipients of welfare services. furthermore, it's needed to stay abreast with rapid social changes that necessarily contribute to altering people's values. Healthy Family Centers will be placed in local communities and offer efficient education, counseling and family culture programs tailored to diverse family needs. In order to make, this work properly, all specialists and organizations associated with the project should make concerted efforts on a long-term basis.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.527-533
• /
• 2015

This study performed an on-site demonstration of the topographic surveying technique at a large-scale open-pit limestone mine in Korea using a fixed-wing unmanned aerial vehicle (UAV, Drone, SenseFly eBee). 288 sheets of aerial photos were taken by an automatic flight for 30 minutes under conditions of 300 m altitude and 12 m/s speed. Except for 37 aerial photos in which no keypoint was detected, 251 aerial photos were utilized for data processing including correction and matching, then an orthomosaic image and digital surface model with 7 cm grid spacing could be generated. A comparison of the X, Y, Z-coordinates of 4 ground control points measured by differential global positioning system and those determined by fixed-wing UAV photogrammetry revealed that the root mean squared errors were around 15 cm. Because the fixed-wing UAV has relatively longer flight time and larger coverage area than rotary-wing UAVs, it can be effectively utilized in large-scale open-pit mines as a topographic surveying tool.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.331-336
• /
• 2003

The advanced spent fuel conditioning process(ACP) was proposed to reduce considerably the overall volume and radioactivity for effective management of the PWR spent fuel in respects on safety and economy. The ACP is under research and development, and have scheduled to perform hot test for demonstration of the ACP after several years. For hot test, hot cell facility of ${\alpha}{\gamma}$ type possess conservative safety is required essentially. A existing hot cell of ${\beta}{\gamma}$ type will be refurbished to minimize construction expenditures of hot cell facility. In this study, the design requirements are established, and the process detail work flow was analysed for the optimum arrangement to ensure effective process operation in hot cell. And also, the basic and detail design of hot cell facility and process and safety analysis was peformed to secure conservative safety of hot cell facility and process.

• Particle and aerosol research
• /
• v.12 no.4
• /
• pp.161-168
• /
• 2016

The purpose of this study is to determine the performance characteristics of the paint particulate and volatile organic compounds(VOCs) simultaneous removal from the spraying paint booth in the laboratory and real site by sticky paint particulate and VOCs simultaneous removal demonstration unit. The sticky paint particulate and VOCs simultaneous removal unit is composed of the horizontal type pleated filter modules and the zig-zag type granular activated carbon packing modules. The test conditions at the laboratory are $50.15g/m^3$ of average paint aerosol concentration and 300 ppm of VOCs concentration which were same as the working conditions of spraying paint booth in the real site. But, the demonstration conditions at the real site are varied according to the working condition of spraying paint booth for the kind of passenger car bodies. The test results at the laboratory obtained that 99% of total particulate collection efficiency at 0.62 m/min of filtration velocity and 84% at 1.77 m/min of filtration velocity. The VOCs removal efficiencies are 97% at $3500hr^{-1}$ of gas hour space velocity and 59% at $10,000hr^{-1}$ of gas hour space velocity. In the real site test, the average removal efficiency of PM10 was measured to be 99.65%, the average removal efficiency of PM2.5 was 99.38%, the average removal efficiency of PM1 was 98.52%, and the average removal efficiency of VOCs was 89%.